Linde Forklift Truck 316 Series with Cummins Tier 3 Engine: S30, S40, S50, S60 Operating Manual (User manual)

Illustrated Factory Operating Manual (User Manual) for Linde Forklift Truck 316 series with Cummins Tier 3 engine. This manual covers the following models: S30, S40, S50, S60. It is 152 pages long and is available in English.

• Introduction
  • Your Linde truck
  • Technical Description
  • Intended use
  • Impermissible use
  • Symbols used
  • Commissioning
  • Truck Takeover
  • EC declaration of conformity
• Safety
  • Safety Rules
  • Handling Fuel, Lubricants and Coolant
  • Residual risks
  • Stability
• Overview
  • Description
  • General view of Truck
  • Type Plates
  • Controls and Indicators
    • Controls and indicators
    • Gauges and Warning lights
• Operation
  • Truck access - doors and covers
  • Drivers cabin
  • Engine access
  • Checks and tasks
    • Engine oil level check
    • Fuel level check
    • Coolant level check
    • Brake fluid check
    • Hydraulic oil level check
    • Filling the windscreen washer bottle
    • Adjusting the drivers seat
    • Tyres check
    • Starting and stopping the engine
      • Starting - stopping the engine
    • Malfunctions
      • Malfunctions -engine
    • Driving
    • Steering
    • Operate the horn
    • Cab interior light
    • Mirrors
    • Braking system
    • Truck lighting and turn indicators
      • Lights, hazard and turn indicators
    • Washers and wipers
      • Operating the wipers
    • Ventilation and heating
      • Heater control and ventilation
    • Fuses
    • Operating the truck
      • Before lifting a load
      • Lifting a load
      • Travelling with load
      • Depositing a load
      • Control levers
      • Before leaving the truck unattended
      • Wheel change
      • Location for jacks
      • Towing
      • Optional equipment
• Maintenance
  • General remarks
  • Hoisting the truck
  • Measures before taking the truck out of operation
  • Putting the truck back into service
  • General information
  • Fuel and oil recommendations
    • Diesel fuel
  • Inspection and maintenance schedule
    • As required Service plan
    • 50 h Service plan
    • 500 h Service plan
    • 1000 h Service plan
    • 2000 h Service plan
    • 2500 h Service plan
    • 6000 h Service plan
  • Inspection and maintenance data
    • Engine
      • Engine oil level check
      • Engine oil change
      • Fuel pre-filter clean
      • Fuelfilter_change
      • Bleeding the fuel system
      • Dust valve -check
      • Air filter element -renew
      • Renew the safety element
      • Coolant level check
      • Coolant strength check
      • Coolant renew
      • Check and clean the radiator and hydraulic oil cooler
      • Engine mountings check
      • Intake and exhaust system -check
      • Drive belt - check
      • Valve clearances - check
      • Check engine accessories
    • Chassis bodywork and fittings
      • Clean the truck
      • Check seat belt for condition and correct operation*
      • Mirrors
      • Wheel nuts -tighten
      • Drive axle hub oil level check
      • Drive axle oil change
      • Steer axle - clean and lubricate
      • Chassis frame
      • Structured components -check
    • Controls
      • Parking brake -lubricate
    • Electrics
      • Battery check
    • Hydraulics
      • Hydraulic oil level check
      • Hydraulic oil filters change
      • Hydraulic oil -renew
    • Load lift system
      • Work on the lifting device
      • Mast and traverse cylinders - lubrication
      • Mast chains -check and adjust
      • Lubrication points
      • Renewing the lift chains (at least every 6000h, 3 years and when 3 stretch has been attained)
    • Troubleshooting
      • Troubleshooting guide (Diesel engine)
      • Troubleshooting guide (Hydraulic system)
  • Annex
• Technical data
  • Datasheet
  • 316 Datasheet
  • Mast variations
  • Mast Variations
• Circuit diagrams
  • Electrical circuit diagrams
  • Hydraulic circuit diagrams