HONDA Generator EU2000i Shop Workshop Repair & Owners Manual

How to use this manual How to use this manual A Few Words About Safety SERVICE INFORMATION The service and repair information contained in this manual is intended for use by qualified, professional technicians. Attempting service or repairs without the proper training, tools, and equipment could cause injury to you and/or others. It could also damage this Honda product or create an unsafe condition. This manual describes the proper methods and procedures for performing service, maintenance, and repairs. Some procedures require the use of special tools. Any person who intends to use a replacement part, service procedure, or a tool that is not recommended by Honda must determine the risks to his or her personal safety and the safe operation of this product. If you need to replace a part, use Honda Genuine parts with the correct part number or an equivalent part. We strongly recommend that you do not use replacement parts of inferior quality. For Your Customer’s Safety Proper service and maintenance are essential to the customer’s safety and the reliability of this product. Any error or oversight while servicing this product can result in faulty operation, damage to the product, or injury to others. For Your Safety Because this manual is intended for the professional service technician, we do not provide warnings about many basic shop safety practices (Hot parts-wear gloves, for example). If you have not received shop safety training or do not feel confident about your knowledge of safe servicing practice, we recommend that you do not attempt to perform the procedures described in this manual. Some of the most important general service safety precautions are given below. However, we cannot warn you of every conceivable hazard that can arise in performing service and repair procedures. Only you can decide whether or not you should perform a given task. Important Safety Precautions Make sure you have a clear understanding of all basic shop safety practices and that you are wearing appropriate clothing and using safety equipment. When performing any service task, be especially careful of the following: • Read all of the instructions before you begin, and make sure you have the tools, the replacement or repair parts, and the skills required to perform the tasks safely and completely. • Protect your eyes by using proper safety glasses, goggles, or face shields anytime you hammer, drill, grind, or work around pressurized air, pressurized liquids, springs or other stored-energy components. If there is any doubt, put on eye protection. • Use other protective wear when necessary, for example gloves or safety shoes. Handling hot or sharp parts can cause severe burns or cuts. Before you grab something that looks like it can hurt you, stop and put on gloves. • Protect yourself and others whenever you have engine-power equipment up in the air. Anytime you lift this product with a hoist, make sure that the hoist hook is securely attached to the product. Make sure the engine is off before you begin any servicing procedures, unless the instruction tells you to do otherwise. This will help eliminate several potential hazards: • Carbon monoxide poisoning from engine exhaust. Be sure there is adequate ventilation whenever you run the engine. • Burns from hot parts. Let the engine and exhaust system cool before working in those areas. • Injury from moving parts. If the instruction tells you to run the engine, be sure your hands, fingers and clothing are out of the way. Gasoline vapors and hydrogen gasses from battery are explosive. To reduce the possibility of a fire or explosion, be careful when working around gasoline or batteries. • Use only a nonflammable solvent, not gasoline, to clean parts. • Never store gasoline in an open container. • Keep all cigarettes, sparks, and flames away from the battery and all fuel-related parts. Improper service or repairs can create an unsafe condition that can cause your customer or others to be seriously hurt or killed. Follow the procedures and precautions in this manual and other service materials carefully. Failure to properly follow instructions and precautions can cause you to be seriously hurt or killed. Follow the procedures and precautions in this manual carefully. eu2000i_eu2000i companion

EU2000i COMPANION INTRODUCTION This manual covers service and repair procedures for the Honda EU2000i and EU2000i Companion generators. All information contained in this manual is based on the latest product information available at the time of printing. We reserve the right to make changes at any time without notice. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher. This includes text, figures, and tables. As you read this manual, you will find information that is preceded by a symbol. The purpose of this message is to help prevent damage to the generator, other property, or the environment. SAFETY MESSAGES Your safety and the safety of others are very important. To help you make informed decisions, we have provided safety messages and other safety information throughout this manual. Of course, it is not practical or possible to warn you about all the hazards associated with servicing these generators. You must use your own good judgement. You will find important safety information in a variety of forms, including: • Safety Labels – on the generator. • Safety Messages – preceded by a safety alert symbol and one of three signal words: DANGER, WARNING, or CAUTION. These signal words mean: You WILL be KILLED or SERIOUSLY HURT if you don’t follow instructions. You CAN be KILLED or SERIOUSLY HURT if you don’t follow instructions. You CAN be HURT if you don’t follow instructions. • Instructions – how to service these generators correctly and safely. American Honda Motor Co., Inc. Service Communications Department NOTICE  DANGER  WARNING  CAUTION CONTENTS SPECIFICATIONS 1 SERVICE INFORMATION 2 MAINTENANCE 3 MUFFLER 4 AIR CLEANER/CARBURETOR 5 CONTROL PANEL 6 SIDE COVERS/FUEL TANK/ FRONT FRAMES/UNDER COVER 7 RECOIL STARTER/FAN COVER 8 GENERATOR 9 CAM PULLEY/CRANKSHAFT/ PISTON/CYLINDER BLOCK 10 OPERATION 11 eu2000i_eu2000i companion

EU2000i COMPANION eu2000i_eu2000i companion

EU2000i COMPANION 1. SPECIFICATIONS 1. SPECIFICATIONS 1. SPECIFICATIONS............................... 1-1 4. DIMENSIONAL DRAWINGS................1-7 2. CHARACTERISTICS .......................... 1-4 5. WIRING DIAGRAMS............................1-9 3. PERFORMANCE CURVES ................. 1-6 EU2000i eu2000i_eu2000i companion

EU2000i COMPANION PWM (Pulse width modulation) eu2000i_eu2000i companion

EU2000i COMPANION EU2000i Companion Model EU2000i COMPANION Type AC1 *1, AN1 *2 Overall length 512 mm (20.2 in) Overall width 290 mm (11.4 in) Overall height 425 mm (16.7 in) Dry weight 20.8 kg (45.9 Ib) Operating weight 23.9 kg (52.7 Ib) DIMENSIONS AND WEIGHTS ENGINE Model GX100 Description code GCANM Type 4-stroke, overhead camshaft single cylinder Displacement 98.5 cm 3 (6.01 cu-in) Bore x stroke 56.0 x 40.0 mm (2.20x 1.57 in) Compression ratio 8.5 ± 0.2 : 1 Cooling system Forced air Ignition system Full transistor Ignition timing 25° ± 2° B.T.D.C. Spark plug CR5HSB (NGK) Carburetor Float type, Horizontal butterfly valve type Air cleaner Semi-dry type Governor Electronic control type Lubrication system Forced splash Oil capacity 0.40 (0.42 US qt, 0.35 lmp qt) Recommended oil SAE 10W-30 Starting system Recoil starter Stopping system Ignition primary circuit ground Fuel used Regular unleaded gasoline (86 pump octane) *1: California type *2: Non-California type GENERATOR Model EU2000i COMPANION Description code EAAJ Generator type Multi-pole field rotation type Generator structure Self-ventilation drip-proof type Excitation Self-excitation (Magnet type) Voltage regulation system PWM (Pulse Width Modulation) Phase Single phase Rotating direction Clockwise (Viewed from the generator) Frequency regulation DC-AC conversion (Inverter type) eu2000i_eu2000i companion

EU2000i COMPANION 2. CHARACTERISTICS EU2000i eu2000i_eu2000i companion

EU2000i COMPANION Model EU2000i COMPANION Type AC1, AN1 Maximum output 2.0 kVA AC rated output 1.6 kVA Rated frequency 60 Hz AC rated voltage 120 V AC rated current 13.3 A Power factor 1.0 cos Momentary Average Average time 10 % max. 6% max. 3 sec. max. Voltage stability ± 1 % max. Momentary Average Average time 1 % max. 1 % max. 1 sec. max. Frequency stability ± 0.1 Hz max. Insulation resistance 10 M min. AC circuit protector 18.7 A Fuel tank capacity 3.6 (0.95 US gal, 0.79 lmp gal) Fuel consumption (at rated load) 1.07 (0.28 US gal, 0.24 Imp gal)/Hr Operating hours (at rated load without refueling) Approx. 3.4 Hr Noise level (LwA) (Rated) LwA 89 dB (A) Voltage variation rate Frequency variation rate EU2000i Companion eu2000i_eu2000i companion

EU2000i COMPANION EU2000i, EU2000i Companion EU2000i only eu2000i_eu2000i companion

EU2000i COMPANION EU2000i eu2000i_eu2000i companion

You're Reading a Preview

HONDA Generator EU2000i Shop Workshop Repair & Owners Manual

Recently Viewed