Operation Manual
912
913
26 472
● Please read and observe the information
given in this Operation Manual. This will
enable you to avoid accidents, preserve the
manufacturer’s warranty and maintain the
engine in peak operating condition.
● This engine has been built exclusively for
the application specified in the scope of
supply, as described by the equipment manu-
facturer and is to be used only for the
intended purpose. Any use exceeding that
scope is considered to be contrary to the
intended purpose. The manufacturer will
not assume responsibility for any damage
resulting therefrom. The risks involved are
to be borne solely by the user.
● Use in accordance with the intended pur-
pose also implies compliance with the con-
ditions laid down by the manufacturer for
operation, maintenance and servicing. The
engine should only be operated by person-
nel trained in its use and the hazards in-
volved.
● The relevant accident prevention guidelines
and other generally accepted safety and
industrial hygiene regulations must be ob-
served.
● When the engine is running, there is a risk of
injury through:
- turning/hot components
- engines with positive ignition
- ignition systems (high electrical voltage)
You must avoid contact at all times!
● Unauthorized engine modifications will in-
validate any liability claims against the manu-
facturer for resultant damage.
Manipulations of the injection and regulating
system may also influence the performance
of the engine, and its emissions. Adherence
to legislation on pollution cannot be guaran-
teed under such conditions.
● Do not change, convert or adjust the cooling
air intake area to the blower.
The manufacturer shall not be held respon-
sible for any damage which results from
such work.
● When carrying out maintenance/repair op-
erations on the engine, the use of DEUTZ
original parts is prescribed. These are spe-
cially designed for your engine and guaran-
tee perfect operation.
Non-compliance results in the expiry of the
warranty!
● Maintenance and cleaning of the engine
should only be carried out when the engine
is switched off and has cooled down.
You must ensure that the electrical systems
have been switched off and the ignition key
has been removed.
Accident prevention guidelines concerning
electrical systems (e.g. VDE-0100/-0101/-
0104/-0105 Electrical protective measures
against dangerous touch voltage) are to be
observed.
When cleaning with fluids, all electrical com-
ponents are to be covered impermeably.
Safety guidelines / Accident prevention
Please enter the engine serial number here. This
number should be quoted when inquiring about
Customer Service, Repairs or Spare Parts (see Section
2.1).
All rights reserved. Technical modifications required
to improve our engines are reserved with regard to
specification data and other technical information
contained in this Operation Manual. No parts of this
Manual may be reproduced in any form or by any
means without our written approval.
0297 9690 en
Engine
Serial Number
Operation Manual
912
913
1
Foreword
Dear Customer,
Air / liquid-cooled DEUTZ engines are designed for a
large number of applications. Consequently, a wide
range of variants are offered to meet the requirements
of specific cases.
Your engine is appropriately equipped for the
installation concerned, which means that not all of
the components described in this Operation Manual
are necessarily mounted to your engine.
We have endeavoured to highlight any differences so
that you will be able to locate the operating and
maintenance instructions relevant to your engine
quickly and easily.
Please read this Manual before starting your engine,
and always observe the operating and maintenance
instructions.
We are available to help with any additional inquiries
Sincerely,
DEUTZ AG
1 General
2 Engine Description
2.1 Model
2.1.1 Rating Plate
2.1.2 Rating Plate Location
2.1.3 Engine Serial Number
2.1.4 Cylinder Numbering
2.1.5 Direct Injection
2.1.6 Two-stage Combustion
2.2 Engine Illustrations
2.2.1 Service Side F4L 912
2.2.2 Exhaust Side F4L 912
2.2.3 Service Side BF4L 913
2.2.4 Exhaust Side BF4L 913
2.3 Lube Oil Circuit
2.3.1 Lube Oil Circuit FL 912/913
2.4 Fuel System Schematic
2.4.1 Fuel Circuit
2.5 Engine Cooling
2.5.1 Regulation of Coolant Flow using the
Exhaust Thermostat
2.5.2 Regulation of Coolant Flow using the
Exhaust Thermostat and Solenoid
3 Engine Operation
3.1 Commissioning
3.1.1 Adding Engine Oil
3.1.2 Filling Oil Bath Air Cleaner
3.1.3 Adding Fuel
3.1.4 Ventilation
3.1.5 Other Preparations
3.1.6 Additional Maintenance Work
3.1.7 Selector Switch for Oil Heater
3.2 Starting
3.2.1 Electric Starting
3.3 Monitoring Systems
3.3.1 Engine Oil Pressure
3.3.2 Engine Temperature
3.3.3 Cooling Fan Drive
Index
3.4 Stopping
3.4.1 Mechanical Shutdown
3.4.2 Electrical Shutdown
3.5 Operating Conditions
3.5.1 Winter Operation
3.5.2 High Ambient Temperatures, High Altitude
4 Operating Media
4.1 Lube Oil
4.1.1 Quality Grade
4.1.2 Viscosity
4.2 Fuel
4.2.1 Quality Grade
4.2.2 Winter-Grade Fuel
5 Routine Maintenance
5.1 Maintenance Schedule
5.2 Maintenance Chart
5.3 Maintenance Work Completed
6 Service and Maintenance
6.1 Lube Oil System
6.1.1 Oil Change Intervals
6.1.2 Checking Oil Level / Changing Oil Level
6.1.3 Changing Oil Filter
6.1.4 Changing the Partial-Flow Oil Filter Insert
6.2 Fuel System
6.2.1 Changing Fuel Filter
6.2.2 Fuel Precleaner Cleaning the Fuel Filter
6.3 Cooling System
6.3.1 Cleaning Intervals
6.4 Combustion Air Filter
6.4.1 Cleaning Intervals
6.4.2 Emptying Cyclone Type Precleaner
6.4.3 Cleaning Oil Bath Air Cleaner
6.4.4 Dry Type Air Cleaner
6.5 Belt Drives
6.5.1 Checking V-Belts
6.5.2 Changing the Fan V-Belt
6.5.3 Tensioning Alternator Belts
6.5.4 Changing Alternator Belts
6.5.5 Checking Warning System
6.5.6 Tensioning and Changing Air Compressor
V-Belts
6.5.7 Air Compressor Design with Double
V-Belt
6.6 Adjustments
6.6.1 Checking / Adjusting Valve Clearance
6.7 Accessories
6.7.1 Battery
6.7.2 Three-Phase Alternator
6.7.3 Lifting Tackle
6.8 Cleaning the Engine
6.8.1 Cleaning the Engine
6.9 Additional Maintenance
6.9.1 Checking the Mountings
6.9.2 Checking the Function of the
Heating Pipe
6.9.3 Checking the Function of the Flame
Glowing System
7 Faults, Causes and Remedies
7.1 Diagnosis Chart
8 Engine Preservation
8.1 Preservation
8.1.1 Preserving Engine
8.1.2 Removing Engine Preservatives
9 Technical Specifications
9.1 Engine Specifications and Settings
9.2 Torque Wrench Settings
9.3 Tools
10 Service
You're Reading a Preview
What's Included?
Lifetime Access
Fast Download Speeds
Offline Viewing
Access Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$36.99
DEUTZ 912 913 914 Engine Shop Repair Service Manual
Viewed 24 Times Today
What's Included?
Lifetime Access
Fast Download Speeds
Offline Viewing
Access Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$36.99
Secure transaction
What's Included?
Lifetime Access
Fast Download Speeds
Offline Viewing
Access Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
Description
DEUTZ 912 913 914 ENGINE SERVICE MANUAL
Get two manuals in one bonus! This includes the 912 and 913, plus the 914 together. The workshop repair manual is available in English, German, French, and Spanish. It covers DEUTZ diesel engines 912, 913, 914 with 760 pages of comprehensive information.
The manual includes checking and settings, cylinder unit, crankshaft, camshaft, crankcase, blower end, flywheel side, fuel injector system, auxiliaries, dismantling and re-assembling the engine complete, electrical system, turbo charge, and special tools.
Compatible with any computer, you can easily print out the page you need and bring it to the shop. This manual is perfect for professional DEUTZ mechanics and do-it-yourself enthusiasts.
