Yamaha RX-V671 AV RECEIVER Service Manual

101214 SERVICE MANUAL IMPORTANT NOTICE This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore not been restated. WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons, we advise all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or the appointed service representative. IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form. The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributor's Service Division. WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss). IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit. ■ CONTENTS TO SERVICE PERSONNEL ............................................ 2 FRONT PANELS ......................................................... 3–4 REAR PANELS ........................................................... 5–8 REMOTE CONTROL PANELS ....................................... 9 SPECIFICATIONS ................................................... 10–15 INTERNAL VIEW .......................................................... 16 SERVICE PRECAUTIONS ............................................ 17 DISASSEMBLY PROCEDURES ............................. 18–23 UPDATING FIRMWARE .......................................... 24–25 SELF-DIAGNOSTIC FUNCTION ............................ 26–67 CONFIRMATION OF IDLING CURRENT OF AMP UNIT .................... 68 DISPLAY DATA ....................................................... 69–70 IC DATA ................................................................... 71–83 PIN CONNECTION DIAGRAMS ............................. 84–86 BLOCK DIAGRAMS ................................................ 87–91 PRINTED CIRCUIT BOARDS ............................... 92–125 SCHEMATIC DIAGRAMS ................................... 127–146 REPLACEMENT PARTS LIST ............................ 147–167 REMOTE CONTROL ........................................... 168–170 ADVANCED SETUP ............................................ 171–172 AV RECEIVER '11.06 P.O.Box 1, Hamamatsu, Japan RX-V671/HTR-6064/ RX-A710 RX-V671/HTR-6064/ RX-A710 Note: When the DIGITAL P.C.B. or IC83 on DIGITAL P.C.B. is replaced, the network function of this unit will not operate properly without additional setting. In such a case, report the serial number of this unit to the following e-mail address. Yamaha Corporation will reply providing the setting procedure to make the network function of this unit operate properly. E-mail: ycav-ysiss@gmx.yamaha.com Copyright © 2011 All rights reserved. This manual is copyrighted by YAMAHA and may not be copied or redistributed either in print or electronically without permission. DRAFT

This product contains chemicals known to the State of California to cause cancer, or birth defects or other reproductive harm. DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHATSOEVER! Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/flux vapor! If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food. 1. Critical Components Information Components having special characteristics are marked ⚠ and must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measurement (For 120V Models Only) When service has been completed, it is imperative to verify that all exposed conductive surfaces are properly insulated from supply circuits. • Meter impedance should be equivalent to 1500 ohms shunted by 0.15 μF. ■ TO SERVICE PERSONNEL • Leakage current must not exceed 0.5mA. • Be sure to test for leakage with the AC plug in both polarities. WARNING: CHEMICAL CONTENT NOTICE! For U model “CAUTION” “F3702: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE 8A, 125V FUSE.” For C model CAUTION F3702: REPLACE WITH SAME TYPE 8A, 125V FUSE. ATTENTION F3702: UTILISER UN FUSIBLE DE RECHANGE DE MÉME TYPE DE 8A, 125V. WALL OUTLET EQUIPMENT UNDER TEST AC LEAKAGE TESTER OR EQUIVALENT INSULATING TABLE All of the P.C.B.s installed in this unit and solder joints are soldered using the lead free solder. Among some types of lead free solder currently available, it is recommended to use one of the following types for the repair work. • Sn + Ag + Cu (tin + silver + copper) • Sn + Cu (tin + copper) • Sn + Zn + Bi (tin + zinc + bismuth) Caution: As the melting point temperature of the lead free solder is about 30°C to 40°C (50°F to 70°F) higher than that of the lead solder, be sure to use a soldering iron suitable to each solder. About lead free solder 2 RX-V671/HTR-6064/RX-A710 RX-V671/HTR-6064/ RX-A710 DRAFT

■ FRONT PANELS RX-V671 (U model) RX-V671 (C, R, T, A, B, G, F, L, S models) HTR-6064 (A, F models) 3 RX-V671/HTR-6064/RX-A710 RX-V671/HTR-6064/ RX-A710 DRAFT

RX-A710 (A model) RX-A710 (U, C models) 4 RX-V671/HTR-6064/RX-A710 RX-V671/HTR-6064/ RX-A710 DRAFT

■ REAR PANELS RX-V671 (U model) RX-V671 (C model) RX-V671 (R, S models) 5 RX-V671/HTR-6064/RX-A710 RX-V671/HTR-6064/ RX-A710 DRAFT

RX-V671 (T model) RX-V671 (A model) RX-V671 (B, G, F models) 6 RX-V671/HTR-6064/RX-A710 RX-V671/HTR-6064/ RX-A710 DRAFT

RX-V671 (L model) HTR-6064 (A model) HTR-6064 (B, G, F models) 7 RX-V671/HTR-6064/RX-A710 RX-V671/HTR-6064/ RX-A710 DRAFT

RX-A710 (U model) RX-A710 (C model) RX-A710 (A model) 8 RX-V671/HTR-6064/RX-A710 RX-V671/HTR-6064/ RX-A710 DRAFT

■ REMOTE CONTROL PANELS RAV436 (U model) RAV437 (C model) RAV438 (R, T, A, B, G, F, L, S models) 9 RX-V671/HTR-6064/RX-A710 RX-V671/HTR-6064/ RX-A710 DRAFT

■ Audio Section Rated Output Power (Power Amp. Section) – 1 channel driven – (1 kHz, 0.9 % THD) U, C, R, T, A, B, G, F, L, S models (8 ohms) FRONT L/R ................................................................ 125 W/ch CENTER .......................................................................... 125 W SURROUND L/R ........................................................ 125 W/ch SURROUND BACK L/R ............................................. 125 W/ch B, G, F models (4 ohms) FRONT L/R ................................................................ 150 W/ch – 2 channel driven simultaneously – (20 Hz to 20 kHz, 0.09 % THD, 8 ohms) FRONT L/R ..............................................................90 W + 90 W (1 kHz, 0.9 % THD, 8 ohms) FRONT L/R ..........................................................105 W + 105 W CENTER ............................................................................ 105 W SURROUND L/R ..................................................105 W + 105 W SURROUND BACK L/R .......................................105 W + 105 W Maximum Effective Output Power (JEITA) [R, T, L, S models] (1 channel driven, 1 kHz, 10 % THD, 8 ohms) FRONT L/R ......................................................................... 150 W/ch CENTER .................................................................................. 150 W SURROUND L/R ................................................................ 150 W/ch SURROUND BACK L/R ..................................................... 150 W/ch Dynamic Power Per Channel (IHF) FRONT L/R (1 channel driven) (8 / 6 / 4 / 2 ohms) ..................................... 130 / 170 / 200 / 240 W Damping Factor (20 Hz to 20 kHz, 8 ohms) FRONT L/R to SPEAKER-A ............................................ 100 or more Input Sensitivity/Input Impedance (1 kHz, 100 W/8 ohms) U, C models AV5 etc. .......................................................... 200 mV / 47 k-ohms R, T, A, B, G, F, L, S models PHONO (MM) .................................................. 3.5 mV / 47 k-ohms AV5 etc. .......................................................... 200 mV / 47 k-ohms Maximum Input Signal (1 kHz) U, C models (0.5 % THD) AV5 etc. (EFFECT ON) ........................................................... 2.3 V R, T, A, B, G, F, L, S models (0.1 % THD) PHONO (MM) ....................................................................... 60 mV (0.5 % THD) AV5 etc. (EFFECT ON) ........................................................... 2.3 V Output Level/Output Impedance REC OUT ......................................................... 200 mV / 1.2 k-ohms SUBWOOFER (2 ch stereo and FRONT SP: small) .............................................................................. 1 V / 1.2 k-ohms ZONE2 OUT ..................................................... 200 mV / 1.2 k-ohms Headphone Jack Rated Output/Output Impedance (1 kHz, 50 mV, 8 ohms) AV5 etc. input ..................................................... 100 mV / 560 ohms Frequency Response (10 Hz to 100 kHz) AV5 etc., FRONT ..................................................................0 / -3 dB RIAA Equalization Deviation [R, T, A, B, G, F, L, S models] PHONO (MM) ................................................................... 0 ±0.5 dB Total Harmonic Distortion (20 Hz to 20 kHz) U, C models (50 W/8 ohms) AV5 etc. (PURE DIRECT) to FRONT SP OUT ......................... 2.3 V R, T, A, B, G, F, L, S models (1 V) PHONO (MM) to REC OUT ......................................0.02 % or less (50 W/8 ohms) AV5 etc. (PURE DIRECT) to FRONT SP OUT ......................... 2.3 V Signal to Noise Ratio (IHF-A Network) U, C models (Input shorted 250 mV) AV5 etc. (PURE DIRECT) to SP OUT .................... 100 dB or more R, T, A, B, G, F, L, S models (Input shorted 5 mV) PHONO (MM) to REC OUT ..................................... 81 dB or more (Input shorted 250 mV) AV5 etc. (PURE DIRECT) to SP OUT .................... 100 dB or more Residual Noise (IHF-A Network) FRONT L/R to SP OUT ................................................150 μV or less Channel Separation (1 kHz / 10 kHz) PHONO (MM) (Input shorted) .......... 60 dB or more / 55 dB or more AV5 etc. (Input 5.1 k-ohms shorted) ...................................................... 60 dB or more / 45 dB or more Volume Control/Step ......................................... MUTE / -80 dB to +16.5 dB / 0.5 dB step Tone Control Characteristics Bass Boost/Cut ........................................ ±6 dB / 0.5 dB step, at 50 Hz Turnover frequency ............................................................. 350 Hz Treble Boost/Cut .......................................±6 dB / 0.5 dB step, at 20 kHz Turnover frequency ............................................................ 3.5 kHz Filter Characteristics FRONT, CENTER, SURROUND, SURROUND BACK small (H.P.F.) .................... fc=40/60/80/90/100/110/120/160/200 Hz, 12 dB/oct. SUBWOOFER small (L.P.F.) .................... fc=40/60/80/90/100/110/120/160/200 Hz, 24 dB/oct. ■ Video Section Video Signal Type Monitor out (Wall paper) U, C, R models ...................................................................... NTSC T, A, B, G, F, L, S models ......................................................... PAL Video conversion .......................................................................................NTSC/PAL Composite Video Signal Level ............................................................................... 1 Vp-p / 75 ohms S-Video Signal Level [B, G, F models] Y ............................................................................. 1 Vp-p / 75 ohms C ..................................................................... 0.286 Vp-p / 75 ohms Component Video Signal Level Y ............................................................................. 1 Vp-p / 75 ohms Video Maximum Input Level (VIDEO Conversion Off) ................................................................................ 1.5 Vp-p or more Video Signal to Noise Ratio ................................................................................... 50 dB or more Monitor Out Frequency Response (VIDEO Conversion Off) Component video signal level ....................... 5 Hz to 60 MHz, -3 dB ■ SPECIFICATIONS 10 RX-V671/HTR-6064/RX-A710 RX-V671/HTR-6064/ RX-A710 DRAFT

Yamaha RX-V671 AV RECEIVER Service Manual

You're Reading a Preview

Recently Viewed