DocuCentre C7500 C6500 C5400 Service Manual&Parts List

ApeosPort-Ⅱ C7500/C6500/C5400 DocuCentre-Ⅱ C7500/C6500/C5400 Service Manual Ver.1

ApeosPort-Ⅱ C7500/C6500/C5400 DocuCentre-Ⅱ C7500/C6500/C5400 Service Manual Ver.1 Issued :Feb. 2008 Edited by: Fuji Xerox Co., Ltd. CS&S TSC SDEG KSP R&D Business Park Bldg 6A7 3-2-1, Sakado, Takatsu-ku, Kawasaki-shi, Kanagawa, JAPAN 213-8508 [XEROX] [The Document Company] are registered trademarks. • This service manual covers the following models FUJI XEROX Co. Ltd. ApeosPort-Ⅱ C7500 ApeosPort-Ⅱ C6500 ApeosPort-Ⅱ C5400 DocuCentre-Ⅱ C7500 DocuCentre-Ⅱ C6500 DocuCentre-Ⅱ C5400 • Related Materials • No other related materials issued other than this service manual. • Confidentiality • This service manual is issued intending use by maintenance service personnel authorized by FUJI XEROX Co. Ltd. Copying, transferring or leasing this manual without prior consent by FUJI XEROX Co. Ltd. is prohibited. • When a page becomes irrelavant (e.g. superceded by a replacement page), destroy the page by burning or shredding it. • Handle with care to avoid loss or damage of the manual. • Revision and Modification Information When design changes or revisions relating to this service manual occur, the overseas technical information or overseas service bulletin may be issued as supplementary information until such changes are accomodated in the updated version of this service manual. Caution Important changes including revisions of spare part numbers and adjustment specifications must immediately be reflected on the respective pages of this manual.

2008.02 0-1 DocuCentre-II C7500G/ApeosPort-II C7500G Introduction Ver.1 0 Introduction 0.1 Getting to Know the Service Manual ......................................................................... 3 0.2 How to Use the Service Manual ................................................................................ 3 0.3 Description for Terminology and Symbols................................................................. 4

2008.02 0-2 DocuCentre-II C7500G/ApeosPort-II C7500G Ver.1 Introduction

2008.02 0-3 DocuCentre-II C7500G/ApeosPort-II C7500G Introduction 0.1 Getting to Know the Service Manual Ver.1 0.1 Getting to Know the Service Manual This manual is used as the standard service manual for the following products. • DocuCentre-II C7500/C6500/C5400 • ApeosPort-II C7500/C6500/C5400 • Publication Comment Sheet Enter any comments and/or corrections regarding this service manual into the Publication Comment Sheet, and send it to the following. Japan: CS Department TSC/SDEG IBG: CS Department IBS via OpCo Technical Service Department 0.2 How to Use the Service Manual This manual describes the standard procedures for the servicing of this product. Refer to Chapter 1 Ser- vice Call Procedure for efficient and effective servicing during maintenance calls. 2.1 Contents of Manual This manual is divided into ten chapters as described below. • Chapter 1 Service Call Procedure This chapter describes the general work and servicing procedures for maintenance. • Chapter 2 Troubleshooting This chapter describes the troubleshooting procedures other than image quality troubleshooting. • Chapter 3 Image Quality Troubleshooting This chapter describes the image quality troubleshooting procedures. • Chapter 4 Disassembly/Assembly and Adjustment This chapter describes the disassembly, assembly, adjustment, and replacement procedures for components. • Chapter 5 Parts List This chapter contains the spare parts list. • Chapter 6 General This chapter describes the following information and how to use Diag/NVM. 6.1 How to Use the Service Mode 6.2 How to Use the DC Code 6.3 Service Data 6.4 Specifications 6.5 Tools and Service Consumables 6.6 Consumables 6.7 Modification • Chapter 7 Wiring Data This chapter contains the wiring diagrams and the following BSD (Block Schematic Diagram) information. • Chain 1 Standby Power • Chain 2 Mode Selection • Chain 3 Machine Run Control • Chain 4 Start Print Power • Chain 5 DADF • Chain 6 Imaging • Chain 7 Paper Supplying • Chain 8 Paper Transportation • Chain 9 Xerographics • Chain 10 Fusing and Copy Transportation • Chain 14 C-Finisher • Chain 15 D-Finisher

2008.02 0-4 DocuCentre-II C7500G/ApeosPort-II C7500G 0.3 Description for Terminology and Symbols Ver.1 Introduction • Chain 16 ESS • Chain 18 2000HCF • Chapter 8 Accessories This chapter contains the data of related products. • Chapter 9 Installation This chapter describes the installation procedure for the optional products. • Chapter 10 System Overview This chapter contains the detailed explanation of the functions described on other chapters and whose explanation is necessary for security. 2.2 Information on Updating This manual will be sent to each Service Center as specified below. Revisions must be incorporated correctly to keep the manual up-to-date. Updating Procedure: • When the manual is revised, the "Ver.1" on the front cover will be renewed to Ver.1, Ver.2, Ver.3 and so on. 0.3 Description for Terminology and Symbols The terminology and symbols used throughout this service manual are described as follows: WARNING Indicates an imminently hazardous situation, such as death or serious injury if operators do not handle the machine correctly by disregarding the statement. WARNING Indicates a potentially hazardous situation, such as death or serious injury if operators do not handle the machine correctly by disregarding the statement. CAUTION Indicates a potentially hazardous situation, such as injury if operators do not handle the machine correctly by disregarding the statement. NOTE: Used when work procedures and rules are emphasized. NOTE: Used when other explanations are given. Purpose Used to describe the purposes of Adjustment and Troubleshooting. REP: Indicates the disassembly/assembly procedure for reference. ADJ: Indicates the adjustment procedure for reference. PL: Indicates the parts list for reference. ASSY: Means Assembly. Safety Critical Components (SCC) For the safety control of the Safety Critical Components and the components specified, follow the regula- tions regarding the Safety Critical Components set by Fuji Xerox Co., Ltd. Important Information Stored Component (ISC) This component stores all the important customer information that is input after the installation. When performing replacement, follow the procedures in "Chapter 4 Disassembly/Assembly Adjustment" to replace/discard. Make absolutely sure that no customer information gets leaked outside.

Chapter 1 Service Call Procedure

DocuCentre C7500 C6500 C5400 Service Manual&Parts List

You're Reading a Preview

Recently Viewed