ApeosPort-IV/DocuCentre-IV C5575/C4475/C3375/C3373 ApeosPort-IVC2275 Service Manual&Parts List

ApeosPort-IV C5575/C4475/C3375/C3373/C2275 DocuCentre-IV C5575/C4475/C3375/C3373 Service Manual Ver.1.2

ApeosPort-IV C5575/4475/3375/3373/2275 DocuCentre- IV C5575/4475/3375/3373 Service Manual Ver.1.2 Issued : April. 2012 ● This service manual covers the following models FUJI XEROX Co. Ltd. ・ ApeosPort-IV C5575/C4475/C3375/C3373/C2275 ・ DocuCentre-IV C5575/C4475/C3375/C3373 ● Related Materials 2000HCF Finisher A Finisher B1 Finisher C/C1/C2 ●Confidentiality  This service manual is issued intending use by maintenance service personnel authorized by FUJI XEROX Co. Ltd. Copying, transferring or leasing this manual without prior consent by FUJI XEROX Co. Ltd. is prohibited.  When a page becomes irrelevant (e.g. superceded by a replacement page), destroy the page by burning or shredding it.  Handle with care to avoid loss or damage of the manual. ●Revision and Modification Information When design changes or revisions relating to this service manual occur, the overseas technical information or overseas service bulletin may be issued as supplementary information until such changes are accommodated in the updated version of this service manual. Caution Important changes including revisions of spare part numbers and adjustment specifications must immediately be reflected on the respective pages of this manual. Edited by: Fuji Xerox Co., Ltd. CS Department TS Section MMC Bldg 7F 3-6-1, Minato Mirai, Nishi-ku, Yokohama-shi, Kanagawa, JAPAN 220-0012 [XEROX] is registered trade mark. PRINTED IN JAPAN

2012/04 0-1 AP/DC-IV C5575G Introduction Version 1.2 0 Introduction 0.1 Getting to know this Service Manual ........................................................................ 3 0.2 How to use the Service Manual ................................................................................ 3 0.3 Description for Terminology And Symbols ............................................................... 4

2012/04 0-2 AP/DC-IV C5575G Version 1.2 Introduction

2012/04 0-3 AP/DC-IV C5575G Introduction 0.1 Getting to know this Service Manual Version 1.2 0.1 Getting to know this Service Manual This manual is used as the standard service manual for ApeosPort-IV/DocuCentre-IV C5575 / C4475 / C3375 / C3373 / C2275. For more information on the following product options, please refer to the supplementary options service manuals. Options that can be connected to this product and the versions of the manuals that describe them: A supplementary manual that deals with the Controller FIP in Chapter 2 for this product is also available. However, the release (Ver 1) contents are the same as those that can be found in this manual. NOTE: The Ver No. of the above supplementary manual is the information at the release of this manual. It will be updated to Ver 1.1, Ver 1.2, and so on when manuals for other machine types are issued. Make sure to always update your manual to the latest version. The revised content consists of new IOT support information and updates to existing information. Please use an updated manual. • Publication Comment Sheet Enter any comments and/or corrections regarding this service manual into the Publication Comment Sheet, and send it to the following department. Japan: CS Department TS Section 0.2 How to use the Service Manual This manual describes the standard procedures for the servicing this product. Refer to Chapter 1 Service Call Procedure for efficient and effective servicing during maintenance calls. For more information on the options, refer to the options manual. 0.2.1 Contents of Manual This manual is divided into 9 chapters as described below. • Chapter 1 Service Call Procedure This chapter describes the general work and servicing procedures for the maintenance of this product. • Chapter 2 Troubleshooting This chapter describes the troubleshooting procedures other than image quality troubleshooting for this product. • Chapter 3 Image Quality Troubleshooting This chapter describes the image quality troubleshooting procedures for this product. • Chapter 4 Disassembly/Assembly and Adjustment This chapter describes the disassembly, assembly, adjustment and replacement procedures for components of this product. • Chapter 5 Parts List This chapter contains the spare parts information for this product. • Chapter 6 General This chapter contains the following information. 6.1 Specifications 6.2 Tools/Service Consumables/Consumables/Modifications 6.3 Service Data 6.4 Service Mode 6.5 Fax-related Information • Chapter 7 Wiring Data This chapter contains the information about the Wiring Connector List/Locations, the Wiring Data, and the BSD for this machine. • Chapter 8 Accessories This chapter contains the information on related products. • Chapter 9 Installation / Removal This chapter contains the installation and removal procedures for this product and the options that are specific to it. • Chapter 10 Mechanism & Functions Overview (not yet issued) 0.2.2 Information on Updating This manual will be sent to each Service Center as specified below. Revisions must be incorporated correctly to keep the manual up-to-date. Updating Procedure: Table 1 No Option Name Manual Name Version 1 Finisher A Finisher A Supplementary Service Manual Ver2.1~ 2 Finisher B1 Finisher B1 Supplementary Service Manual Ver2.1~ 3 Finisher C Finisher C Supplementary Service Manual Ver2.4~ 4 2000HCF 2000HCF Supplementary Service Manual Ver2.2~ Table 2 No Supplementary Contents Manual Name Version 1 ESS related FIP ESS FIP Common Supplementary Service Manual Ver2.8~

2012/04 0-4 AP/DC-IV C5575G 0.3 Description for Terminology And Symbols Version 1.2 Introduction • When the manual is updated, the issue number ’Ver. 1’ will be changed to Ver. 1.1, Ver. 1.2, and so on. 0.3 Description for Terminology And Symbols The terms and symbols used throughout this manual are explained here. • The terms and symbols used at the beginning of a text are defined as follows: DANGER Indicates an imminently hazardous situation, such as death or serious injury if operators do not handle the machine correctly by disregarding the statement. WARNING Indicates a potentially hazardous situation, such as death or serious injury if operators do not handle the machine correctly by disregarding the statement. CAUTION Indicates a potentially hazardous situation, such as injury or property damage if operators do not handle the machine correctly by disregarding the statement. Instruction: Used to alert you to a procedure which, if not strictly observed, could result in damage to the machine or equipment. NOTE: Used when work procedures and rules are emphasized. NOTE:Used when other explanations are given. Purpose Used to describe the purposes of Adjustment and Troubleshooting. REP: Indicates the disassembly/assembly procedure for reference. ADJ: Indicates the adjustment procedure for reference. PL: Indicates the parts list for reference. Terminology Safety Critical Components (SCC) For the safety control of the Safety Critical Components and the components specified, follow the regula- tions regarding the Safety Critical Components set by Fuji Xerox Co., Ltd. As to replacement of any component designated SCC, the complete component unit must be replaced. It must never be disassembled or no individual internal parts of it must be replaced. Table 1 Terminology Terminology Description Assy Means Assembly. SLA Means Selfoc Lens Assembly. (LED Printer exposure device) IH Means Induction Heating. The techonology used for heating in the Fusing Unit section. (IH Fusing Unit) TEC Value Abbreviation of Typical Electricity Consumption, which means the standard power consumption. Read as ’tec’.

2012/04 0-5 AP/DC-IV C5575G Introduction 0.3 Description for Terminology And Symbols Version 1.2 Installation of any part other than the ones designated by Fuji Xerox Co. Ltd. shall be strictly prohibited because it cannot be guaranteed in quality and safety. Important Information Stored Component (ISC) This component stores all the important customer information that is input after the installation. When performing replacement, follow the procedures in ’Chapter 4 Disassembly/Assembly and Adjustment’ to replace/discard. Make absolutely sure that no customer information gets leaked outside.

2012/04 0-6 AP/DC-IV C5575G 0.3 Description for Terminology And Symbols Version 1.2 Introduction

ApeosPort-IV/DocuCentre-IV C5575/C4475/C3375/C3373 ApeosPort-IVC2275 Service Manual&Parts List

You're Reading a Preview

Recently Viewed