Ricoh SP 3400SF, SP 3410SF (code M016 M017) Service Manual

Get the detailed Service Manual for Ricoh SP 3400SF, SP 3410SF. This manual contains comprehensive diagrams, pictures, and procedures for diagnosing and repairing your Ricoh copier. It is a valuable resource for both professional mechanics and DIY enthusiasts.

• PRODUCT INFORMATION
  • 1. PRODUCT INFORMATION
  • 1.1 SPECIFICATIONS
  • 1.2 MACHINE OVERVIEW
    • 1.2.1 COMPONENT LAYOUT
    • 1.2.2 PAPER PATH
    • 1.2.3 DRIVE LAYOUT
  • 1.3 MACHINE CONFIGURATION
• INSTALLATION
  • 2. INSTALLATION
    • 2.1 INSTALLATION REQUIREMENTS
      • 2.1.1 ENVIRONMENT
      • 2.1.2 MACHINE LEVEL
      • 2.1.3 MACHINE SPACE REQUIREMENT
      • 2.1.4 POWER REQUIREMENTS
      • 2.1.5 INSTALLATION PROCEDURE
• PREVENTIVE MAINTENANCE
  • 3. PREVENTIVE MAINTENANCE
    • 3.1 PM INTERVALS
    • 3.1.1 PM PARTS
    • 3.1.2 YIELD COUNTER
      • Counter Reset
• REPLACEMENT AND ADJUSTMENT
  • 4. REPLACEMENT AND ADJUSTMENT
    • 4.1 BEFORE YOU START
    • 4.2 SPECIAL TOOLS
    • 4.3 EXTERIOR COVERS
      • 4.3.1 FRONT COVER
      • 4.3.2 LEFT COVER
      • 4.3.3 REAR COVER
      • 4.3.4 RIGHT COVER
      • 4.3.5 TOP COVER
        • When installing the top cover
    • 4.4 ADF
      • 4.4.1 ADF UNIT
      • 4.4.2 ORIGINAL TRAY
      • 4.4.3 ADF FEED UNIT
      • 4.4.4 ADF SEPARATION PAD
      • 4.4.5 ADF FRONT COVER
      • 4.4.6 ADF REAR COVER
      • 4.4.7 ADF COVER
      • 4.4.8 ADF MOTOR
      • 4.4.9 ORIGINAL SET SENSOR
      • 4.4.10 ADF COVER OPEN SENSOR
      • 4.4.11 ADF FEED SENSOR
      • 4.4.12 ADF DRIVE BOARD
    • 4.5 SCANNER UNIT
      • 4.5.1 OPERATION PANEL
      • 4.5.2 SCANNER TOP COVER
      • 4.5.3 SCANNER CARRIAGE UNIT
      • 4.5.4 EXPOSURE LAMP
        • When reinstalling the exposure lamp
      • 4.5.5 LAMP STABILIZER BOARD
      • 4.5.6 SCANNER MOTOR
    • 4.6 LASER UNIT
      • 4.6.1 CAUTION DECAL LOCATIONS
      • 4.6.2 LASER UNIT
      • 4.6.3 POLYGON MIRROR MOTOR
    • 4.7 PAPER FEED AND EXIT
      • 4.7.1 PAPER FEED ROLLER
        • After installing a new paper feed roller
      • 4.7.2 FRICTION PAD
      • 4.7.3 PAPER END SENSOR
      • 4.7.4 BY-PASS FEED ROLLER
      • 4.7.5 BY-PASS FEED ROLLER FRICTION PAD
      • 4.7.6 BY-PASS FEED SENSOR
      • 4.7.7 PAPER FEED CLUTCH
      • 4.7.8 RELAY CLUTCH
      • 4.7.9 REGISTRATION CLUTCH
      • 4.7.10 TONER END SENSOR
      • 4.7.11 PAPER EXIT SENSOR
      • 4.7.12 RELAY SENSOR
      • 4.7.13 INVERTER SENSOR
      • 4.7.14 REGISTRATION ROLLER AND SENSOR
    • 4.8 PAPER TRANSFER
      • 4.8.1 TRANSFER ROLLER
        • After installing a new transfer roller
    • 4.9 FUSING
      • 4.9.1 FUSING UNIT
        • Reinstallation
        • After installing a new fusing unit
      • 4.9.2 THERMOSTAT
      • 4.9.3 THERMISTOR
      • 4.9.4 FUSING LAMP
        • When reinstall the fusing lamp
      • 4.9.5 HOT ROLLER
      • 4.9.6 PRESSURE ROLLER
      • 4.9.7 HOT ROLLER STRIPPER PAWLS
    • 4.10 MOTORS
      • 4.10.1 MAIN MOTOR
      • 4.10.2 DUPLEX MOTOR (FOR M017)
    • 4.11 ELECTRICAL COMPONENTS
      • 4.11.1 LAYOUT OF PC BOARDS
        • ECB (Engine Controller Board)
        • EEPROM
        • Controller Board
        • FCU
        • USB Host Board
      • 4.11.2 PSU
      • 4.11.3 CHARGE TERMINAL CASE
    • 4.12 OTHERS
      • 4.12.1 COOLING FAN
      • 4.12.2 SPEAKER
      • 4.12.3 QUENCHING LAMP
    • 4.13 IMAGE ADJUSTMENT
      • 4.13.1 REGISTRATION ADJUSTMENT
        • User Adjustment
        • Service Adjustment
• SYSTEM MAINTENANCE REFERENCE
  • 5. SYSTEM MAINTENANCE REFERENCE
    • 5.1 SERVICE PROGRAM MODE
      • 5.1.1 OVERVIEW
      • 5.1.2 MAINTENANCE MODE MENU
        • To access Maintenance Mode do the following:
        • Selecting an Item
        • Going into the Next Level/ Returning to the Previous Level
        • Exiting the Maintenance Mode Menu
        • Menu List
      • 5.1.3 FAX SERVICE TEST MENU
        • Entering the Fax Service Test Menu
        • Selecting an Item
        • Going into the Next Level/ Returning to the Previous Level
        • Exiting the Maintenance Mode Menu
        • Menu List
    • 5.2 CONFIGURATION AND MAINTENANCE PAGE
      • 5.2.1 OVERVIEW
        • To Print the Configuration Page/ Maintenance Page
        • Other Types of Reports
        • Total Counter
    • 5.3 FIRMWARE UPDATING
      • 5.3.1 CHECKING THE MACHINE FIRMWARE VERSION
      • 5.3.2 UPDATING THE CONTROLLER FIRMWARE
        • Procedure
      • 5.3.3 UPDATING THE ENGINE FIRMWARE
        • Procedure
      • 5.3.4 UPDATING THE BOOT LOADER FIRMWARE
      • 5.3.5 UPDATING FAILURE
      • 5.3.6 FW UPDATE TOOL MESSAGES
        • FW Update Tool Messages: Information
        • FW Update Tool Messages: Error
• TROUBLESHOOTING
  • 6. TROUBLESHOOTING
    • 6.1 SERVICE CALL CONDITIONS
      • 6.1.1 SUMMARY
        • Fusing related SCs
        • SC 2xx (Laser Optics Error)
        • SC 4xx (Image Transfer and Transfer Error)
        • SC 5xx (Motor and Fusing Error)
        • SC 6xx (Communication and Other Error)
    • 6.2 IMAGE PROBLEMS
      • 6.2.1 OVERVIEW
      • 6.2.2 TEST PAGE PRINTING
        • Test Page Print Procedure
      • 6.2.3 TEST PATTERN PRINTING
        • Test Pattern Print Procedure
      • 6.2.4 DARK LINES IN HALFTONE AREAS AT 75MM INTERVALS
    • 6.3 JAM
      • 6.3.1 JAM SENSOR LAYOUT
      • Paper Jam
      • Original Jam
      • 6.3.2 JAM MESSAGE LIST
        • Paper Jam
        • Original Jam
• ENERGY SAVING
  • 7. ENERGY SAVING
    • 7.1 ENERGY SAVE
      • 7.1.1 ENERGY SAVER MODES
        • Timer Settings
        • Return to Stand-by Mode
        • Recommendation
    • 7.2 PAPER SAVE
      • 7.2.1 EFFECTIVENESS OF DUPLEX/COMBINE FUNCTION
        • 1. Duplex:
        • 2. Combine mode:
        • 3. Duplex + Combine:
        • Total counter
• M016/M017 SERVICE MANUAL APPENDICES
  • SEE M016/M017 SERVICE MANUAL APPENDICES SECTION FOR DETAILED TABLE OF CONTENTS
• PAPER FEED UNIT TK 1080 (M355)
  • SEE SECTION M355 FOR DETAILED TABLE OF CONTENTS
• Number of pages: 227.