NIKON COOLPIX 8700 Service & Repair Manual

p ght Nkn p at n ll R ghts R s d P nt d n apan a R RP R NU L

- E8700 - SPECIFICATIONS DISASSEMBLING WARNING / NOTES, SB TOP COVER DISCHARGE ELECTRICITY FROM THE MAIN CAPACITOR BACK CABINET LCD UNIT / VF1 PCB / TB1 PCB TOP CABINET LENS UNIT COVER BATTERY UNIT CP-1 PCB, CA-1 PCB, PW-1 PCB LENS UNIT / CCD / EVF FRONT LENS-BARREL UNIT / FIX-TUBE COUPLING PLATE / CAM TUBE 1ST/2ND LENS GROUP UNIT / STRAIGHT GUIDE TUBE 1 REAR LENS-BARREL UNIT 4TH LENS GROUP UNIT / CAM TUBE UNIT STRAIGHT GUEDE TUBE 2 / SHUTTER UNIT 5TH LENS GROUP UNIT ZOOM MOTOR UNIT / ZOOM GEAR ASSEMBLY ZOOM MOTOR UNIT / ZOOM GEAR 5TH LENS GROUP UNIT SHUTTER UNIT / STRAIGHT GUIDE TUBE 2 CAM TUBE UNIT / 4TH LENS GROUP UNIT REAR LENS-BARREL UNIT 1ST AND 2ND LENS GROUP UNITS / STRAIGHT GUIDE TUBE 1 CAM TUBE / COUPLING PLATE FIX-TUBE / FRONT LENS-BARREL UNIT OPERATIONAL / RESOLUTION INSPECTIONS CREATE SELF-MADE LENS-BARREL INSPECTION TOOL EVF, CCD LENS UNIT CP-1 PCB, PW-1 PCB BATTERY UNIT LENS UNIT COVER TOP CABINET TB1 PCB / VF1 PCB / LCD UNIT BACK CABINET / SB TOP COVER CONTENTS

- E8700 - ADJUSTMENT DISCRIPTION OF CIRCUIT ELECTRICITY OVERALL WIRING OVERALL BLOCK DIAGRAM ASIC BLOCK DIAGRAM CP-1 (LENS) BLOCK DIAGRAM CP-1 (8BIT MICRO PROCESSOR) BLOCK DIAGRAM CA-1 BLOCK DIAGRAM PW-1 BLOCK DIAGRAM VF-1 CIRCUIT DIAGRAM TB-1 BLOCK DIAGRAM TB-2 BLOCK DIAGRAM TB-3 BLOCK DIAGRAM TB-4 BLOCK DIAGRAM FUSE CONFIGURATION (PW1 PCB) INSPECTION STANDARD TOOL LIST

- M1 E8700 - Specifications Type E8700 digital camera Effective pixels 8.0 million CCD Image size (pixels) 2/3 type interline CCD total pixels: 8.31 million • 3264 x 2448 (Full) • 2048 x 1536 (3M) • 1024 x 768 (PC) • 3264 x 2176 (3:2) • 1600 x 1200 (2M) • 640 x 480 (TV) • 2592 x 1944 (5M) • 1280 x 960 (1M) Lens Focal length f/-number Construction 8 x Zoom Nikkor F = 9 – 72 mm (35-mm [135] camera format equivalent: 35 – 280 mm) f2.8 – f4.2 Fourteen elements in ten groups Digital zoom 4 x Autofocus (AF) Focus range Focus-area selection Contrast AF 100 cm (1’8”) – ; 3 cm (0’8”) – in macro mode Multi-point (5 points) AF is possible. (Area can be selected.) Viewfinder Magnification Frame coverage Diopter adjustment Color LC viewfinder, 0.44 high-temperature poly-silicone TFT LC (LED back light), 235.000 dots 0.30 – 0.84 x (Needs confirmation) Approximately 97% (through/freeze image), Approx. 100% (Play-back image) +1 – -4 Monitor Frame coverage 1.8”, 134,000-dot, low temperature polysilicon TFT LCD with brightness and hue adjustment, With the back light luminance adjustment function (5 steps) Approximately 97% (through/freeze image), Approx. 100% (Play-back image) Storage Media File system Compression Type I and II CompactFlash™ (CF) cards and Microdrive ® cards Compliant with Design rule for Camera File systems (DCF) and Digital Print Order Format (DPOF) JPEG-baseline-compliant Exposure Metering Exposure control Range (ISO 100 equivalent) Multi-split metering (256 split metering/Image sensor is used.) • Multiple metering • Spot • Applied to the metering point at the 5-piont AF. • Center-weighted • AF spot Programmed auto with flexible program, shutter-priority auto, aperture-priority auto, manual, exposure compensation (–2.0 – +2.0 EV in steps of 1 / 3 EV), autoexposure bracketing W: – 1.0 – 19.0 EV, T: + 0.5 – 19.0 EV (Sensitivity enhancement +2 is included.) Shutter Speed Mechanical and charge-coupled electronic shutter 8 sec – 1 / 4000 sec bulb setting available

- M2 E8700 - Aperture Range Seven-blade iris diaphragm Ten settings in steps of 1 / 3 EV Sensitivity ISO050 equivalent approximately 050,100, 200, 400, 800, or Auto (auto gain to ISO 800) Self-timer Three- or ten-second duration Built-in Speedlight Sync method Guide number 12/38.4 (ISO 100, m/ft) Automatic sync control Accessory shoe Sync contact Standard ISO hot-shoe contact with safety lock X-contact only Interface USB2.0, Serial interface (used exclusively for MC-EU1) Video output User can choose from NTSC and PAL I/O terminals • DC input • Audio/video (A/V) output • Digital terminal (for both USB and Serial) Power sources • One rechargeable Nikon EN-EL1 lithium-ion battery (supplied) or six-volt 2CR5 (DL245) lithium battery (available separately) • MB-E5700 battery pack (available separately) with six LR6 (AA) alkaline, lithium, NiCad, or NiMH batteries • MH-53 AC adapter/battery charger (available separately) Battery life (EN-EL1) Approximately 90 minutes (as measured at room temperature [20°C/68 °F] under standard Nikon test conditions: monitor on, zoom adjusted with each shot, ﬂash used in approximately one third of photographs, image quality set to NORMAL Dimensions (W x H x D) 113 x 97 x 75 mm (4.4" x 3.8" x 2.9") Weight Approximately 480 g without battery and memory card

- D1 E8700 - SB TOP COVER • Open the SB unit . • Remove the screw (M1.7 x 4.5) . • Remove the SB Top cover . Discharging electricity from the main condenser DISASSEMBLING Notes: Remove the battery prior to dissassmbly. At disassembling, be sure to memorize how the lead wires were arranged, how the screws were ﬁxed and the type of the used screws. Electrical parts must be grounded since they are easily damaged by static. � �� Gray Terminal Black Terminal K

- D2 E8700 - ONN TO P • Remove the Hood VF . • Remove the screw (M1.7 x 2.5) . • Remove the 4 Pieces of screws (M1.7 x 3.5) . • Open the CF card cover . • Remove the 2 Pieces of screws (M1.7 x 4) . • Carefully remove the Back Cabinet from the camera body . • Remove the FPC and the connector . • Remove the Back Cabinet . • Open the Jack cover . • Remove the screw (M1.7 x 3), and then remove the Jack Holder . • Remove the Jack cover . BACK CABINET

- D3 E8700 - • Remove the four screws ① (M1.7× 3). (Fig. 1) • The cover back LCD ② can be removed. • Remove the three screws ③ (M1.7 × 2.5). (Fig. 2) • The holder LCD side ④ and the cover front LCD ⑤ can be removed. • Remove the FPC ⑥ (2 pcs.). • The LCD can be removed. LCD UNIT VF1 PCB • Disconnect the connector ⑦ (2 pcs.). • Remove the solder ⑧ . • The holder LCD monitor ⑨ , the spacer LCD monitor ⑩ and the VF1 PCB can be removed. TB1 PCB • Remove the two screws ⑪ (M1.7 × 4). • Remove the screw ⑫ (M1.7 × 3). • Remove the cover joint base ⑬ . • Remove the screw ⑭ (M1.7 × 2.5). • Remove the screw ⑮ (M1.4 × 5). • The cover joint ⑯ can be removed. • Remove the three screws ⑰ (M1.7 × 3). • Remove the screw ⑱ (M1.7 × 2.5). • The TB1 PCB can be removed. P T P L

- D4 E8700 - P P nn ct r P • Remove the screw (M1.7 x 2.5). • Remove the 2 Pieces of screws (M1.7 x 3.5). • Open the battery cover . • Remove the screw (M1.7 x 3). • Ture the cover grip and then remove the screw (M1.7 x 4.5). • Remove the screws (M1.7 x 4). • Close the SB . • Remove the 2 Pieces of screws (M1.7 x 4.5). • Carefully remove the top cabinet from the camera unit. • Remove the 2 Pieces of FPC . • Remove the FPC and the connector . • Remove the top cabinet . TOP CABINET

- D5 E8700 - • Remove the 4 Pieces of screws (M1.7 x 4). • Remove the 2 Pieces of screws (M1.7 x 3.5). • Take off the cover and remove the screw (M1.7 4.5). • Remove the FPC and the connector . • Carefully remove the SB unit from the camera unit. • Carefully remove the Lens unit cover from the camera unit. P nn ct r LENS UNIT COVER

NIKON COOLPIX 8700 Service & Repair Manual

You're Reading a Preview

Recently Viewed