MAINTENANCE SAFETY WARNING Instructions are necessary before operating or servicing machine. Read and understand the Operation & Maintenance Manual, Operator’s Handbook and signs (decals) on machine. Follow warnings and instructions in the manuals when making repairs, adjustments or servicing. Check for correct function after adjustments, repairs or service. Untrained operators and failure to follow instructions can cause injury or death. W-2003-0903 Never service the Bobcat Skid- Steer Loader without instructions. Have good ventilation when welding or grinding painted parts. Wear dust mask when grinding painted parts. Toxic dust and gas can be produced. Avoid exhaust fume leaks which can kill without warning. Exhaust system must be tightly sealed. Stop, cool and clean engine of flammable materials before checking fluids. Never service or adjust loader with the engine running unless instructed to do so in the manual. Avoid contact with leaking hydraulic fluid or diesel fuel under pressure. It can penetrate the skin or eyes. Never fill fuel tank with engine running, while smoking or when near open flame. Disconnecting or loosening any hydraulic tubeline, hose, fitting, component or a part failure can cause lift arms to drop. Do not go under lift arms when raised unless supported by an approved lift arm support device. Replace it if damaged. Keep body, jewelry and clothing away from moving parts, electrical contact, hot parts and exhaust. Wear eye protection to guard from battery acid, compressed springs, fluids under pressure and flying debris when engines are running or tools are used. Use eye protection approved for type of welding. Keep rear door closed except for service. Close and latch door before operating the loader. Never work on loader with lift arms up unless lift arms are held by an approved lift arm support device. Replace if damaged. Never modify equipment or add attachments not approved by Bobcat Company. Lead-acid batteries produce flammable and explosive gases. Keep arcs, sparks, flames and lighted tobacco away from batteries. Batteries contain acid which burns eyes or skin on contact. Wear protective clothing. If acid contacts body, flush well with water. For eye contact flush well and get immediate medical attention. Use the correct procedure to lift or lower operator cab. Cleaning and maintenance are required daily. Maintenance procedures which are given in the Operation & Maintenance Manual can be performed by the owner/ operator without any specific technical training. Maintenance procedures which are not in the Operation & Maintenance Manual must be performed ONLY BY QUALIFIED BOBCAT SERVICE PERSONNEL. Always use genuine Bobcat replacement parts. The Service Safety Training Course is available from your Bobcat dealer. MSW01-0805 WRONG B-6590 WRONG B-16102 B-6580 WRONG B-16102 B-6589 WRONG B-15280 WRONG B-15231 WRONG B-11799 B-10731a CORRECT B-12365 CORRECT B-7469 CORRECT Safety Alert Symbol: This symbol with a warning statement, means: “Warning, be alert! Your safety is involved!” Carefully read the message that follows.
FOREWORD This manual is for the Bobcat loader mechanic. It provides necessary servicing and adjustment procedures for the Bobcat loader and its component parts and systems. Refer to the Operation & Maintenance Manual for operating instructions, starting procedure, daily checks, etc. A general inspection of the following items must be made after the loader has had service or repair: 1. Check that the ROPS/FOPS (Including sidescreens) is in good condition and is not modified. 2. Check that ROPS mounting hardware is tightened and is Melroe approved. 3. The seat belt must be correctly installed, functional and in good condition. 4. The seat bar and pedal interlocks must be correctly adjusted, clean and lubricated. 5. Check lift arm support device, replace if damaged. 6. Machine signs must be legible and in the correct location. 7. Steering levers and foot pedals must return to neutral. 8. Check for correct function of the work lights. 9. The parking brake must function correctly. 10. Enclosure door latches must open and close freely. 11. Bob–Tach wedges and linkages must function correctly and be in good condition. 12. Safety treads must in good condition. 13. Check for correct function of indicator lamps (Optional on some models). 14. Check hydraulic fluid level, engine oil level and fuel supply. 15. Inspect for fuel, oil or hydraulic fluid leaks. 16. Lubricate the loader. Revised Jan. 99 WARNING 763/763H BICS Loader iii Service Manual
24. Check for correct function of the Bobcat Interlock Control System (BICS™) before the machine is returned to the customer. 18. Inspect the air cleaner for damage or leaks. Check the condition of the element. 19. Check the electrical charging system. 20. Check tires for wear and pressure. 21. Inspect for loose or broken parts or connections. 22. Operate the loader and check all functions. 23. Check for any field modification not completed. Recommend to the owner that all necessary corrections be made before the machine is returned to service. 17. Check the condition of the battery and cables. Revised Jan. 99 iv 763/763H BICS Loader Service Manual
Upon purchasing this manual, you will receive a .PDF file containing an email address for further assistance. After contacting the provided email, you will receive a reply with a link to access the manual for your Bobcat 763 High Flow 512212001-512249999.
This comprehensive manual covers every aspect of your machine, providing detailed guidance on every nut and bolt. With its extensive content spanning hundreds of pages, it equips you to address various issues, from routine maintenance such as oil changes to more complex tasks like transmission swaps. The manual includes numerous illustrations to assist you in your work, accompanied by easily understandable text.
Utilize the search function to navigate the manual efficiently and print the necessary pages as needed. This Factory Service Repair Manual serves as a thorough resource, guiding you through the essential maintenance and repair procedures in a step-by-step manner, imparting the expertise typically possessed by factory-trained technicians.
By leveraging the knowledge encapsulated in this service repair manual, any owner can confidently make informed decisions regarding the maintenance and repair of their machine.
Our commitment extends beyond delivering a high-quality service manual; we also provide exceptional customer service, ensuring your satisfaction is guaranteed.
Recently Viewed
5,521,897Happy Clients
2,594,462eManuals
1,120,453Trusted Sellers
15Years in Business
Price:
Actual Price:
Bobcat 763 High Flow 512212001-512249999 Factory Service & Work Shop Manual