SK850 SUPER ACERA TIER 3 CRAWLER EXCAVATOR OPERATOR’S MANUAL APPLICABLE NO. LY01-00101 NOTE: CNH America LLC reserves the right to make improvements in design or changes in specifications at any time without incurring any obligation to install them on units previously sold. KOBELCO CONSTRUCTION TECHNICAL MANUALS Manuals are available from your Dealer for the operation, service, and repair of your machine. For prompt convenient service, contact your Dealer for assistance in obtaining the manuals for your machine. Your Dealer can expedite your order for Operator’s Manuals, Parts Catalogs, Service Manuals, and Maintenance records. Always give the Machine Name, Model, and P.I.N. (Product Identification Number) or S.N. (Serial Number) of your machine so your Dealer can provide the correct manuals for your machine. Part Number: S2LY00001ZE06
CHAPTER 1 - GENERAL INFORMATION 1-1 CHAPTER 1 GENERAL INFORMATION TO THE OWNER SK850-LC CRAWLER EXCAVATOR Your machine has been designed and built to the highest standards of quality. It conforms to all current safety regulations. The risk of accidents can never be completely excluded. That is why it is essential to observe elementary safety rules and precautions. Read this manual carefully, paying particular attention to the instructions concerning safety, operation and maintenance so as to avoid the risk of injury while operating or servicing the machine. The standard attachments and tools of this machine are designed to carry out all kinds of earth moving and rehandling operations. If you want to use this machine to handle a load (pipes, culverts, formwork, etc.), make sure that it is equipped to carry out this kind of work. For this type of application, the machine must be equipped with safety valves, a load handling chart corresponding to the type of machine and its attachment and a load fixing point. All legal requirements must also be strictly observed. Do not use this machine for any application or purpose other than those described in this manual. If the machine is to be used for work involving the use of special attachments, accessories or equipment, consult your Kobelco Dealer in order to make sure that any adaptations or modifications made are in keeping with the machine's technical specifications and with prevailing safety requirements. Any modification or adaptation which is not approved by the manufacturer may invalidate the machine's initial conformity with safety requirements. The machine must undergo regular inspections, the frequency of which varies according to the type of use. Consult your authorized Kobelco Dealer. Before permitting a new operator on this machine, make certain: The operator has received the necessary training to operate the machine correctly and safely. The operator has read and understands the instructions given in this manual and the Operator’s Manual. The operator possesses a valid local vehicle permit and/or other applicable local age work permits. Always keep this manual in the operator's compartment (in the seat back, behind the operator's seat). Make sure it is complete and in good condition. If you wish to obtain extra copies, or copies in languages other than that of the country of use, consult your authorized Kobelco Dealer. Your Kobelco Dealer is available for any further information. They will also provide any after-sales service you may need, and genuine Kobelco spare parts, your guarantee of quality and match. Contact your dealer for operator manuals translated into Spanish or French Canadian. The information in this manual is provided on the basis of information that was available at the time the manual was written. Settings, procedures, part numbers, software and other items can change. These changes can affect the service that is given to the machine. Ensure that you have complete and current information from you dealer before you start any machine operation.
CHAPTER 1 - GENERAL INFORMATION 1-2 RIGHT, LEFT, FRONT, AND REAR OF THE MACHINE The terms Right-hand, Left-hand, Front, and Rear are used in this manual to indicate the sides as they are seen from the operator's seat when the cab is over the idler wheels. Figure 1 below shows the machine in normal TRAVEL position. In normal TRAVEL position, the cab is over the idler wheels. The travel reduction gears are at the rear of the upper structure. DC03H142 Figure 1 6 6 3 4 5 5 1 2 1. FRONT 3. RIGHT HAND SIDE 5. TRAVEL REDUCTION GEARS (TRAVEL MOTORS) 2. REAR 4. LEFT HAND SIDE 6. IDLER WHEELS
CHAPTER 1 - GENERAL INFORMATION 1-3 MACHINE COMPONENTS DC03H141 Figure 2 MACHINE COMPONENTS 1. ENGINE 10. BOOM 19. TRACK IDLER 28. TRAVEL MOTOR 2. HYDRAULIC PUMP 11. ARM CYLINDER 20. TRACK SPRING 29. BATTERY 3. ENGINE MUFFLER 12. ARM 21. ENGINE AIR CLEANER 30. ENGINE RADIATOR 4. MAIN CONTROL VALVE 13. BUCKET CYLINDER 22. CAT WALK 31. POWER DIVIDER 5. HYDRAULIC OIL TANK 14. IDLER LINK 23. STEP 32. ENGINE HOOD 6. FUEL TANK 15. BUCKET LINK 24. UPPER ROLLER 33. COUNTERWEIGHT 7. SWING MOTOR 16. BUCKET 25. ACCESS DOOR 34. OIL COOLER 8. HAND RAIL 17. OPERATOR CAB 26. SWING RING 9. BOOM CYLINDER 18. TRACK SHOE ASSEMBLY 27. ELECTRIC GREASE PUMP 31 26 25 27 28 23 22 20 19 18 17 7 8 9 10 11 12 13 14 15 24 34 29 30 21 33 2 32 1 3 4 5 6 16
CHAPTER 1 - GENERAL INFORMATION 1-4 IDENTIFICATION NUMBERS MODEL, SERIAL NUMBER, AND YEAR OF MANUFACTURE When ordering parts, obtaining information or assistance, always supply your Kobelco Construction, LLC Dealer with the type and serial number of your machine or accessories. Write the following in the spaces below: The type, serial number and year of manufacture of your machine, accessories and the serial numbers of the various hydraulic and mechanical components. DC03H140 Figure 3 ENGINE DC03H139 Figure 4 COMPONENT SERIAL NUMBERS PRODUCT IDENTIFICATION PLATE ➤ Model ➤ Serial Number ➤ Manufacturing Year ENGINE ➤ Make and Model ➤ Serial Number COMPONENT SERIAL NUMBERS ➤ Hydraulic Pump ➤ Swing Reduction Gear ➤ Travel Reduction Gears ➤ Travel Control Valve ➤ Attachment Control Valve ➤ Swing Control Valve
The Kobelco SK850 Excavators Operator's Manual is a comprehensive guide for operating and maintaining the powerful Kobelco SK850 Super Acera Tier 3 Hydraulic Excavator. Whether you're a professional mechanic or a DIY enthusiast, this manual is packed with valuable information to help you get the most out of your machine.
Inside, you'll find detailed instructions on safely and efficiently operating the SK850 Excavator. From starting and stopping procedures to advanced techniques for digging and lifting, this manual has it all. It also includes essential maintenance tips to ensure your excavator stays in top shape, as well as important safety guidelines to keep you and your crew protected on the job site.
Key features of the Kobelco SK850 Super Acera Tier 3 Hydraulic Excavator Operator's Manual:
Comprehensive operating instructions
Detailed maintenance procedures
Essential safety guidelines
Service information for troubleshooting and repairs
Invest in the Kobelco SK850 Excavators Operator's Manual today and unlock the full potential of your machine. Whether you're a construction professional or a DIY enthusiast, this manual is an invaluable resource for anyone operating the SK850 Super Acera Tier 3 Hydraulic Excavator.