ill
This safety alert symbol indicates important safety messages in
this manual. When you see this symbol, carefully read the
! message that follows and be alert to the possibility of personal
injury or death. M171 B
Safety Decals on this machine use the words, Danger, Warning or Caution, which
are defined as follows:
• DANGER: Indicates an immediate hazardous situation which, if not avoided, will
result in death or serious injury. The color associated with Danger is RED.
• WARNING: Indicates a potentially hazardous situation which, if not avoided will
result in serious injury. The color associated with Warning is ORANGE.
• CAUTION: Indicates a potentially hazardous situation which, if not avoided, can
result in injury. It can also be used to alert against unsafe practices. The color
associated with Caution is YELLOW.
A WARNING
IMPROPER OPERATION OF THIS MACHINE CAN CAUSE INJURY OR DEATH.
BEFORE USING THIS MACHINE, MAKE CERTAIN THAT EVERY OPERATOR:
• Is instructed in safe and proper use of the machine.
• Reads and understands the Manual(s) pertaining to the machine.
• Reads and understands ALL Safety Decals on the machine.
• Clears the area of other persons.
• Learns and practices safe use of machine controls in a safe, clear area before
operating on a job site.
It is your responsibility to observe pertinent laws and regulations and follow Case
Corporation instructions on machine operation and maintenance.
Copyright © 1997 Case Corporation Bur 9-25682
Issued January 1997 (Revised June, 1997)
CASE and CASE IH are registered trademarks of Case Corporation
TABLE OF CONTENTS
TO THE OWNER .................................................................................................................. 1
AFTER DELIVERY CHECK ............................................................................................... 2
RIGHT, LEFT, FRONT, AND REAR SIDES OF THE MACHINE ......................................... 2
IDENTIFICATION NUMBER .............................................................................................. 3
SAFETY/DECALS/HAND SIGNALS ...................................................................................... 7
SAFETY RULES ............................................................................................................... 7
BEFORE OPERATION ...................................................................................................... 8
MACHINE OPERATION .................................................................................................... 9
PARKING THE MACHINE ............................................................................................... 10
FIRE EXTINGUISHER .................................................................................................... 10
BURN PREVENTION ...................................................................................................... 11
CAST DUCTILE IRON ..................................................................................................... 11
FIRE OR EXPLOSION PREVENTION ............................................................................. 12
MAINTENANCE ........................................................................................................ 13,14
HAND SIGNALS .............................................................................................................. 17
INSTRUMENTS AND CONTROLS ...................................................................................... 21
FOOT THROTTLE, STEERING AND BRAKE PEDAL ...................................................... 24
DECELERATOR ............................................................................................................. 25
TRANSMISSION CONTROLS, ENGINE HAND THROTTLE AND HORN BUTTON .......... 26
BACK-UP ALARM ........................................................................................................... 28
FUEL GAUGE ................................................................................................................. 28
TRANSMISSION RANGE SWITCH ................................................................................. 29
MASTER DISCONNECT SWITCH ................................................................................... 29
DOZER BLADE CONTROL LEVER ................................................................................. 30
RIPPER CONTROL LEVER ............................................................................................ 32
CAB CONTROLS ............................................................................................................ 33
OPERATORS SEAT ........................................................................................................ 36
OPERATORS SEAT BELT .............................................................................................. 37
OPERATING INSTRUCTIONS ............................................................................................ 39
RUN-IN PERIOD OF A NEW MACHINE .......................................................................... 39
ENGINE OPERATION ..................................................................................................... 40
CRAWLER OPERATION ................................................................................................. 43
TOWING A DISABLED CRAWLER .................................................................................. 48
TRANSPORTING THE MACHINE ................................................................................... 51
OPERATING IN HOT WEATHER .................................................................................... 52
OPERATING IN COLD WEATHER .................................................................................. 53
DOZER OPERATION ...................................................................................................... 58
RIPPER OPERATION ..................................................................................................... 63
TRACK SYSTEMS .......................................................................................................... 64
UJ
CJ
o
UJ
en
I
I-
~
a:
I-
-I
::D
s::
-I
I
Ci5
m
o
(j)
m
TABLE OF CONTENTS ________________________________ ___
LUBRICATION/MAINTENANCE CHARTS ........................................................................... 77
GENERAL SAFETY BEFORE YOU SERVICE ................................................................. 77
SYSTEMGARD LUBRICATION ANALYSIS PROGRAM ................................................... 78
FLUIDS AND LUBRICANTS ............................................................................................ 79
ENGINE HOURMETER ................................................................................................... 80
LUBRICATION CHART ................................................................................................... 81
LUBRICATION/FILTERS/FLUIDS ........................................................................................ 83
ACCESS DOORS ............................................................................................................ 83
GREASE FITTINGS ........................................................................................................ 84
POWER ANGLE-TILT DOZER GREASE FITTINGS ........................................................ 85
ENGINE LUBRICATION (PRIOR TO P.I.N. JJG0218023 AND
P.I.N. JJG0218024 THROUGH JJG0218474) ............................................................ 88
ENGINE LUBRICATION (P.I.N. JJG0218023 AND
P.I.N. JJG0218475 and AFTER) ................................................................................ 89
ENGINE COOLING SYSTEM .......................................................................................... 92
AIR FILTER SYSTEM ................................................................................................... 100
AIR CLEANER (PRIOR TO P.I.N. JJG0218023 AND
P.I.N. JJG0218024 THROUGH JJG0218474) .......................................................... 101
AIR CLEANER (P.I.N. JJG0218023 AND P.I.N. JJG0218475 AND AFTER) .................. 103
HYDRAULIC SYSTEM .................................................................................................. 107
TRANSMISSION ........................................................................................................... 110
FINAL DRIVES .............................................................................................................. 114
CAB AIR FILTER ........................................................................................................... 115
MAINTENANCE/ADJUSTMENTS ...................................................................................... 117
ETHER STARTING FLUID CAN .................................................................................... 117
REVERSIBLE FAN POSITIONS (If Equipped) ............................................................... 118
AIR CONDITIONER DRIVE BELT ................................................................................. 119
SEAT BELT SERViCE ................................................................................................... 119
TRANSMISSION CONTROL LEVER ADJUSTMENT ..................................................... 120
BRAKE WEAR CHECK ................................................................................................. 121
ROLL-OVER PROTECTIVE STRUCTURE .................................................................... 122
MACHINE CLEANING ................................................................................................... 125
ELECTRICAL SYSTEM ..................................................................................................... 127
BATTERY SERVICE ..................................................................................................... 127
WORK LAMPS .............................................................................................................. 128
ALTERNATOR WARNING LAMP .................................................................................. 129
INSTRUMENT PANEL LAMP ........................................................................................ 129
TRANSMISSION FILTER WARNING LAMP .................................................................. 130
FUSES .......................................................................................................................... 130
II
___________________________________ TABLE OF CONTENTS
STORAGE ........................................................................................................................ 131
MACHINE STORAGE .................................................................................................... 131
SPECIFICATIONS ............................................................................................................ 133
TRAVEL SPEEDS ......................................................................................................... 133
RIPPER ........................................................................................................................ 133
ENGINE (PRIOR TO P.I.N. JJG0218023 AND
P.I.N. JJG0218024 THROUGH JJG0218474) .......................................................... 134
ENGINE (P.I.N. JJG0218023 AND P.I.N. JJG0218475 AFTER) .................................... 134
POWER ANGLE-TILT DOZER (LONG TRACK) ............................................................. 135
WEIGHTS ..................................................................................................................... 139
AFTER DELIVERY CHECK ........................................................................................ 141,143
ALPHABETICAL INDEX .................................................................................................... 145
III
UJ
CJ
o
UJ
en
I
I-
~
a:
I-
-I
::D
s::
-I
I
Ci5
m
o
(j)
m
TABLE OF CONTENTS ________________________________ ___
This page left blank
IV
TO THE OWNER
Read this manual before you start the engine and operate the machine. If you need
more information, see your dealer.
Your dealer can give you assistance with Case Corporation approved service parts.
Your dealer has technicians with special training who know the best methods of repair
and maintenance for your machine.
A24814
Do not use this machine for any application or purpose other than those described in
this manual. If the machine is to used in an application that involves special
attachments or equipment, consult an authorized Case dealer or the Case
Corporation. Unauthorized modifications can cause serious injury or death. Anyone
making such unauthorized modifications is responsible for the consequences.
UJ
CJ
o
UJ
en
I
I-
~
a:
I-
-I
::D
s::
-I
I
Ci5
m
o
(j)
m
TOTHEOWNER ______________________________________ __
AFTER DELIVERY CHECK
Two copies of the After Delivery Check are in the back of this manual. One copy is for
you and one copy is for the dealer. Make sure that your dealer does the After Delivery
Check after the first 20 hours of machine operation.
RIGHT, LEFT, FRONT, AND REAR SIDES
OF THE MACHINE
Right-hand and left-hand, when used in this manual, indicate the right and left sides of
the machine as seen from the operators seat.
1. RIGHT HAND SIDE
4. FRONT
2. REAR
3. LEFT HAND SIDE
B830800M
REGULATIONS
NOTE: Local, state and federal laws may regulate the disposal of various fluids used
in this equipment, such as, but not limited to, oils and hydraulic, battery and
transmission fluids. You should be aware of and comply with any pertinent regulations
in order to ensure safe and proper handling and disposal of any regulated fluids.
2
________________________________________ TOTHEOWNER
IDENTIFICATION NUMBER
Write your machine model number, Product Identification Number (P.l.N.) and serial numbers
on the lines provided below. If needed, give these numbers to your dealer when you need parts
or information for your machine.
Make a record of the numbers. Keep the record and your Manufacturer's Statement of Origin in
a safe place. If the machine is stolen, report the numbers to your local law enforcement
agency.
MACHINE MODEL NUMBER ______________________________ __
PRODUCT IDENTIFICATION NUMBER ___________ __
ENGINE SERIAL NUMBER ________________________________ _
ROPS CAB SERIAL NUMBER ____________________________ _
ROPS CANOPY SERIAL NUMBER __________________________ _
TRANSMISSION SERIAL NUMBER
DOZER BLADE SERIAL NUMBER __________________________ __
OTHER ____________________________________________ __
Product Identification Number
(PJ.N.) ROPS Canopy
A25808
A24770
3
UJ
CJ
o
UJ
en
I
I-
~
a:
I-
-I
::D
s::
-I
I
Ci5
m
o
(j)
m
TOTHEOWNER ______________________________________ __
ENGINE ROPS CAB
BP96K009 B866138V
TRANSMISSION DOZER BLADE
1. Behind Guard
RIPPER
A24814A
138L95
4
A24787
You're Reading a Preview
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$31.99
Case 1150G Crawler Operators Owner Instruction Manual - IMPROVED -
Viewed 45 Times Today
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$31.99
Secure transaction
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
Description
This complete factory manual for the Case 1150G Crawler includes detailed instructions, diagrams, and illustrations based on the manufacturer's specifications. It is also known as an operator's manual, instruction manual, maintenance manual, owner's manual, or user manual. The manual covers various aspects of operating and maintaining the machine.
The manual is in English and is compatible with all versions of Windows, Mac, iOS, BB, Android, etc. It is searchable, bookmarked, and indexed for easy navigation. The contents include information on identification numbers, machine components, safety, decals, hand signals, instruments and controls, operating instructions, lubrication, maintenance charts, filters, fluids, electrical system, storage, specifications, after delivery check, and more.
This manual is designed to be clear and easily understandable for anyone. It is in an easy-to-read file format and can be viewed, zoomed, and printed on any computer. The manual is completely searchable and bookmarked, making it easy to find information. It contains numerous pictures, diagrams, illustrations, and charts, along with technical details and instructions.
For those interested in obtaining this manual, it is immediately accessible and does not require waiting. It is important to note that this is not an interactive software manual but a .PDF file manual. Additionally, it is recommended to have the latest version of Acrobat Reader to display the document correctly. For any inquiries about other manuals, feel free to reach out.
