NEW HOLLand LB75 Loader BACKHOE Operators Manual

LB 75 86594261 8/99

ª 1999 NEW HOLLAND NORTH AMERICA, INC. 198 TO THE OWNER: This manual contains information concerning the operation, adjustment, and maintenance for your Model LB 75 backhoe loader You have purchased a dependable machine, but only by proper care and operation can you expect to receive the performance and long service built into this backhoe loader. Please have all operators read this manual carefully and keep it available for ready reference. This backhoe loader was designed to power and propel itself. It is intended to dig, load and move material in normal and customary applications. Do not modify or alter or permit anyone else to modify or alter this backhoe loader or any of its components or any backhoe loader function without first consulting an authorized New Holland dealer. If you have any questions regarding backhoe loader modifications, contact New Holland Construction Company, 245 E. North Ave., Carol Stream, IL 60188-2099. Your safety and the safety of those around you depends upon the care and good judgment you use while operating this equipment. Read the safety precautions carefully. After you have operated the backhoe loader for 50 hours, take your backhoe loader and this manual to your selling dealer. He will perform the factory-recommended 50-hour service. You will be responsible for the cost of lubricants, fluids, filters and other items replaced as part of normal maintenance. Prior to taking the backhoe loader to your selling dealer for service, it is recommended that you contact them to determine any other charges for which you may be responsible. All data given in this book is subject to production variations. Dimensions and weights are approximate only and the illustrations do not necessarily show tractors in standard condition. For exact information about any particular backhoe loader, please consult your New Holland dealer. CAUTION: THIS SYMBOL IS USED THROUGHOUT THIS BOOK WHENEVER PERSONAL SAFETY IS INVOLVED. TAKE TIME TO READ AND FOLLOW THE INSTRUCTIONS. BE CAREFUL! CAUTION: PICTURES IN THIS MANUAL MAY SHOW PROTECTIVE SHIELDING OPEN OR RE- MOVED TO BETTER ILLUSTRATE A PARTICULAR FEATURE OR ADJUSTMENT. BE CERTAIN, HOWEVER, TO CLOSE OR REPLACE ALL SHIELDING BEFORE OPERATING THE MACHINE. IMPROVEMENTS New Holland North America, Inc. is continually striving to improve its products. We reserve the right to make improvements or changes when it becomes practical and possible to do so, without incurring any obligation to make changes or additions to the equipment sold previously.

0-1 CONTENTS FEDERAL EMISSIONS WARRANTY 0-2 ........................................ SAFETY 0-3 .................................................................. GENERAL INFORMATION 1-1 ................................................. OPERATION 2-1 .............................................................. FIELD OPERATIONS 3-1 ...................................................... LUBRICATION AND MAINTENANCE 4-1 ........................................ TROUBLESHOOTING 5-1 ..................................................... MACHINE STORAGE 6-1 ...................................................... ACCESSORIES 7-1 ........................................................... SPECIFICATIONS 8-1 ......................................................... INDEX 8-13 .................................................................. PREDELIVERY SERVICE REPORTS 8-15 ....................................... DELIVERY REPORTS 8-19 .................................................... 50-HOUR SERVICE CHECKLISTS 8-23 .........................................

0-2 FEDERAL EMISSIONS WARRANTY New Holland warrants that your new 1998 and later heavy-duty off-road diesel engine was designed, built, and equipped to conform to applicable U.S. Environmental Protection Agency regulations for a period of use of five years or 3,000 hours of operation, whichever occurs first. The new model year, class of diesel engine, and emission application determination for your engine are identified on the emission control information label affixed to the top of your engine’s rocker arm cover. The warranty period begins on the date the new equipment is sold to the first retail purchaser. Any emission control system parts which are proven defective during normal use will be repaired or replaced during the warranty period. The warranty repairs and service will be performed by any authorized New Holland dealer at the dealer’s place of business, with no charge for parts or labor (including diagnosis). As the engine owner, you are responsible to perform all the required maintenance listed in your owner’s manual. New Holland will not deny an emission warranty claim solely because you have no record of maintenance; however, a claim may be denied if your failure to perform maintenance resulted in the failure of a warranted part. Receipts covering regular maintenance should be retained in the event of questions and these receipts should be passed on to each subsequent owner of the engine. It is recommended replacement parts used for maintenance or repairs be New Holland Service Parts to maintain the quality originally designed into your emission certified engine. The use of non-New Holland parts does not invalidate the warranty on other components unless the use of such parts causes damage to warranted parts. New Holland wishes to assure the emission control systems warranty is being properly administered. If you believe you have not received the service entitled to under this warranty, you should contact the nearest New Holland Office for assistance. The address and phone number is in your vehicle owner’s manual. If additional assistance or information is needed, contact: New Holland Construction Company 245 E. North Ave. Carol Stream, IL 60188-2099 (630) 260-4000 Please note that the Emission Warranty does not cover: 1. Systems and parts that were not first installed on the new equipment or engine as original equipment by New Holland. 2. Part malfunctions caused by abuse, misuse, improper adjustment, modification, alteration, tampering, disconnection, improper or inadequate maintenance, or use of non-recommended fuels and lubricating oils. 3. Accident caused damage, acts of nature, or other events beyond New Holland’s control. 4. Replacement of expendable items made in connection with scheduled maintenance. 5. Parts requiring replacement, inspection or adjustment maintenance intervals for reasons other than being defective. 6. Parts which are not New Holland Service Parts. 7. Loss of time, inconvenience, loss of use of equipment/engine or commercial loss. 8. Equipment with altered or disconnected hourmeter where the hours cannot be determined. 9. Equipment normally operated outside the United States. 10. Non-defective parts replaced by other than New Holland dealers. Coverage This emission control system warranty applies to the following IVECO 8045.05B engine emission control parts. Fuel Injection Pump Fuel Injectors Turbocharger Intake Manifold Exhaust Manifold Boost Pressure Tubing-connection to Aneroid Device ON F.I.P.

0-3 PRECAUTIONARY STATEMENTS PERSONAL SAFETY Throughout this manual and on machine decals, you will find precautionary statements (“CAUTION”, “WARNING”, and “DANGER”) followed by specific instructions. These precautions are intended for the personal safety of you and those working with you. Please take the time to read them. CAUTION: THE WORD “CAUTION” IS USED WHERE A SAFE BEHAVIORAL PRACTICE AC- CORDING TO OPERATING AND MAINTENANCE INSTRUCTIONS AND COMMON SAFETY PRACTICES WILL PROTECT THE OPERATOR AND OTHERS FROM ACCIDENT INVOLVEMENT. WARNING: THE WORD “WARNING” DENOTES A POTENTIAL OR HIDDEN HAZARD WHICH HAS A POTENTIAL FOR SERIOUS INJURY. IT IS USED TO WARN OPERATORS AND OTHERS TO EX- ERCISE EVERY APPROPRIATE MEANS TO AVOID A SURPRISE INVOLVEMENT WITH MACHIN- ERY. DANGER: THE WORD “DANGER” DENOTES A FORBIDDEN PRACTICE IN CONNECTION WITH A SERIOUS HAZARD. FAILURE TO FOLLOW THE “CAUTION”, “WARNING”, AND “DANGER” INSTRUCTIONS MAY RESULT IN SERIOUS BODILY INJURY OR DEATH. MACHINE SAFETY Additional precautionary statements (“ATTENTION” and “IMPORTANT”) are followed by specific instructions. These statements are intended for machine safety. ATTENTION: The word “ATTENTION” is used to warn the operator of potential machine damage if a certain procedure is not followed. IMPORTANT: The word “IMPORTANT” is used to inform the reader of something he needs to know to prevent minor machine damage if a certain procedure is not followed.

1-1 SECTION 1 GENERAL INFORMATION This Manual has been prepared to assist you in the correct procedure for running-in, driving, operating and maintenance of your new Backhoe Loader. Read this Manual carefully and keep it in a convenient place for future reference. If at any time you require advice concerning your machine, do not hesitate to contact your authorized dealer. They have company trained personnel, genuine manufacturer’s parts and the necessary equipment to carry out all your service requirements. GENERAL Your machine was designed to power and propel itself and is intended for use in normal and customary applications. It is also designed to give maximum performance, economy and ease of operation under a wide variety of operating conditions. Prior to delivery, the machine was carefully inspected, both at the factory and by your dealer to ensure that it reaches you in optimum condition. To maintain this condition and ensure trouble-free operation, it is important that the routine services, as specified in Section 4, of this Manual, are carried out at the recommended intervals. Figure 1-1

GENERAL INFORMATION 1-2 FIRST 50 HOUR SERVICE After you have operated the machine for 50 hours, take your machine, together with this Manual, to your dealer. He will then perform the factory recommended 50 hour service and complete the service report sheets at the back of this book. The first sheet is the dealer’s copy and should be removed by the dealer after the service has been carried out. The second copy is your record of the service performed. Ensure that you and the dealer sign both copies. SERVICE PARTS The company would like to point out that ‘non-genuine’ parts have not been examined and approved by the Company. The installation and/or use of such products could have negative effects upon the design characteristics of your machine and thereby affect it’s safety. The Company is not liable for any damage caused by the use of ‘non-genuine’ parts and accessories. It is prohibited to carry out any modifications to the machine unless specifically authorized, in writing, by the After Sales Service department of the Company. WARRANTY Your Backhoe Loader is warranted according to the legal rights in your country and the contractual agreement with your selling dealer. IMPORTANT: No warranty shall apply if the machine has not been used, adjusted or maintained according to the instructions given in the Operator’s Manual. Figure 1-2

GENERAL INFORMATION 1-3 PRODUCT IDENTIFICATION Your Backhoe Loader and its major components are identified by various numbers and letters for recognition in After Sales Service. The following information provides the locations of these identification plates, stamped numbers and examples of what can be found on your machine. VEHICLE SERIAL NUMBER (1) The Serial Number is stamped on the top of the right-hand main frame, in front of the right-hand loader post, in position (1). Example: *031005017* NOTE: The Serial Number and identification numbers of components may be required by your dealer when requesting parts or service. These numbers will also be required as an aid to identifying the machine if it is ever stolen, keep them safe. VEHICLE IDENTIFICATION PLATES The machine identification plates are located on the right-hand loader post, as shown at position (2). Record the data of your machine below. MODEL/TECHNICAL TYPE Example: *699.510.700* UNIT SERIAL NO. Example: *031005017* YEAR Example: *1999* 1 2 2 Figure 1-3 ENGINE IDENTIFICATION The engine identification information is located on the right-hand engine sump rail. Record the information below for quick reference. MODEL NO. Example *804505C231* SERIAL NO. Example: *123456* DATE CODE. Figure 1-4

You're Reading a Preview

NEW HOLLand LB75 Loader BACKHOE Operators Manual

Recently Viewed