CASE 580M Series 2 BACKHOE Loader Parts Catalog Manual

580M SERIES 2 LOADER BACKHOE PARTS CATALOG Publication Part Number: 7-9031NA This unit first become available in February, 2004. TABLE OF CONTENTS GENERAL INFORMATION SECTION 2 – ENGINE SECTION 3 – FUEL SYSTEM SECTION 4 – ELECTRICAL SYSTEM SECTION 5 – TRACKS / STEERING SECTION 6 – POWER TRAIN SECTION 7 – BRAKES SECTION 8 – HYDRAULICS SECTION 9 – CHASSIS/ATTACHMENTS INDEX BD04A005 Photograph may show installation of optional equipment.

TABLE OF CONTENTS 02-01 RADIATOR - MOUNTING 02-02 DEAERATION SYSTEM - MOUNTING 02-03 RADIATOR ASSY (WITH OR WITHOUT AIR CONDITIONING) 02-04 AIR CLEANER - AIR INTAKE PARTS (WITHOUT TURBOCHARGER) 02-04A AIR CLEANER - AIR INTAKE PARTS (WITH TURBOCHARGER) 02-05 AIR CLEANER (WITHOUT TURBOCHARGER) 02-05A AIR CLEANER (WITH TURBOCHARGER) 02-06 MUFFLER - EXHAUST SYSTEM (WITH TURBOCHARGER) 02-06A MUFFLER, ASPIRATED - EXHAUST SYSTEM 02-06B MUFFLER - EXHAUST SYSTEM (WITHOUT TURBOCHARGER) 02-07 ENGINE - MOUNTING 02-07A ENGINE - BLOCK HEATER 02-08 ENGINE 02-09 CYLINDER BLOCK 02-10 CYLINDER BLOCK 02-11 OIL PUMP, PAN 02-12 CYLINDER BLOCK - COVERS 02-13 CYLINDER BLOCK - COVERS 02-14 CYLINDER BLOCK - COVERS 02-15 BREATHER - ENGINE 02-16 CYLINDER HEAD 02-17 CYLINDER HEAD - COVERS 02-18 CYLINDER HEAD - VALVE MECHANISM 02-19 MANIFOLD - INTAKE 02-20 MANIFOLD - EXHAUST 02-21 CRANKSHAFT 02-22 PISTONS - CONNECTING ROD 02-23 PISTONS - CONNECTING ROD 02-24 FLYWHEEL - ENGINE 02-25 PULLEY - CRANKSHAFT 02-26 DYNAMIC BALANCER, GEARS & SHAFTS 02-27 DYNAMIC BALANCER, GEARS & SHAFTS (2830952) 02-28 CAMSHAFT 02-29 TURBOCHARGER 02-30 ENGINE, OIL 02-31 OIL PUMP - ENGINE 02-32 OIL FILTERS - ENGINE 02-33 PIPING - ENGINE OIL 02-34 OIL FILTER AND COOLER 02-35 WATER PUMP 02-36 COOLING SYSTEM - ENGINE 02-37 THERMOSTAT - ENGINE COOLING SYSTEM 02-38 WATER PUMP - CONTROL 02-39 FAN DRIVE 02-40 POWER TAKE-OFF 02-41 ENGINE - LIFT HOOK 03-01 FUEL LINES, RESERVOIR - FILTER, IN-LINE FUEL 03-02 CONTROLS - THROTTLE, HAND 03-03 CONTROLS - THROTTLE, FOOT 03-04 FUEL INJECTION PUMP 03-05 FUEL INJECTION SYSTEM

TABLE OF CONTENTS 03-06 FUEL INJECTION SYSTEM 03-07 FUEL INJECTION SYSTEM 03-08 FUEL FILTER 03-09 FUEL PUMP 03-10 FUEL INJECTION SYSTEM 03-11 FUEL INJECTION SYSTEM 04-01 STARTER 04-02 ALTERNATOR 04-03 STARTER MOUNTING - ALTERNATOR MOUNTING 04-04 HARNESS, ENGINE - MOUNTING AND CONNECTIONS 04-05 BATTERY CABLES (MODELS WITHOUT COLD START) 04-06 BATTERY, DUAL - COLD START 04-06A COLD START GRID HEATER 04-07 HARNESS, FRONT CONSOLE - SWITCHES 04-08 HARNESS, FRONT CONSOLE - MOUNTING 04-09 HARNESS, SIDE CONSOLE - SWITCHES 04-10 INSTRUMENT PANEL, FRONT - COVERS 04-11 INSTRUMENT PANEL, SIDE - COVERS (RIGHT-HAND SIDE) 04-12 INSTRUMENT CLUSTER 04-13 ELECTRICAL - LAMPS, ROPS CANOPY 04-14 ELECTRICAL - LAMPS, ROPS CAB 04-15 LAMP ASSY (ROPS CANOPY MODELS) 04-16 HORN - ALARM, BACKUP 04-17 BEACON, ROTATING (CAB OR CANOPY MODELS) 04-18 ANTENNA, RADIO - HARNESS, RADIO 04-19 ELECTRICAL - BACKHOE AUXILIARY HYDRAULIC, UNI-DIRECTIONAL 04-20 ELECTRICAL - BACKHOE AUXILIARY HYDRAULIC, WITH PILOT CONTROLS 05-01 STEERING WHEEL - COLUMN 05-02 HYDRAULICS - STEERING 05-03 STEERING COLUMN 05-04 AXLE, FRONT (86990837) - MOUNTING 05-05 AXLE, FRONT (86990837) - HOUSING 05-06 AXLE, FRONT (86990837) - HOUSING, SWIVEL 05-07 AXLE, FRONT (86990837) - CYLINDER, STEERING 05-08 AXLE, FRONT (86990837) - HUB AND BEARINGS 05-09 WHEELS, FRONT - TIRES 06-01 AXLE, FRONT DRIVE - MOUNTING 06-02 AXLE, FRONT DRIVE - HOUSING 06-03 AXLE, FRONT DRIVE - HOUSING, SWIVEL 06-04 AXLE, FRONT DRIVE - CYLINDER, STEERING 06-05 AXLE, FRONT DRIVE - SHAFTS, AXLE 06-06 AXLE, FRONT DRIVE - PLANETARY 06-07 AXLE, FRONT DRIVE - DIFFERENTIAL 06-08 AXLE, FRONT DRIVE - RING AND PINION 06-09 DRIVE SHAFT, FRONT AXLE 06-10 COOLING SYSTEM - TRANSMISSION 06-11 TRANSMISSION - MOUNTING 06-12 TRANSMISSION ASSY - FILTER, OIL 06-13 TRANSMISSION ASSY (2WD) - HOUSING 06-14 TRANSMISSION ASSY (4WD) - HOUSING 06-15 TRANSMISSION ASSY - PUMP, OIL

TABLE OF CONTENTS 06-16 TRANSMISSION ASSY - SHIFTER MECHANISM 06-17 TRANSMISSION ASSY - SHAFT, IDLER AND PRIMARY 06-18 TRANSMISSION ASSY - SHAFT, INPUT 06-19 TRANSMISSION ASSY - SHAFT, SECONDARY 06-20 TRANSMISSION ASSY (4WD) - SHAFT, OUTPUT 06-21 TRANSMISSION ASSY - VALVE, CONTROL 06-22 TRANSMISSION ASSY (4WD) - VALVE, SOLENOID 06-23 WHEELS, REAR - TIRES 06-24 AXLE, REAR DRIVE - MOUNTING 06-25 AXLE, REAR - DIFFERENTIAL LOCK 06-26 AXLE, REAR DRIVE - HOUSING 06-27 AXLE, REAR DRIVE - DIFFERENTIAL 06-28 AXLE, REAR DRIVE - RING AND PINION 06-29 AXLE, REAR DRIVE - DIFFERENTIAL LOCK 06-30 AXLE, REAR DRIVE - PLANETARY 06-31 DRIVE SHAFT, REAR AXLE 07-01 AXLE, REAR DRIVE - BRAKE, DIFFERENTIAL 07-02 AXLE, REAR DRIVE - BRAKE, PARKING 07-03 BRAKE - PEDALS 07-04 HYDRAULICS - BRAKE MASTER CYLINDER 07-05 CYLINDER ASSY - BRAKE MASTER 07-06 CONTROLS - BRAKE, PARKING 08-01 HYDRAULICS - PUMP, FILTER AND LOADER VALVE 08-02 HYDRAULICS - LOADER VALVE AND FILTER TO BACKHOE VALVE 08-03 HYDRAULICS - COOLER, RETURN LINES AND FILTER 08-04 HYDRAULICS - CYLINDER, LOADER LIFT 08-05 HYDRAULICS - CYLINDER, LOADER BUCKET 08-06 HYDRAULICS - CYLINDER, LOADER CLAM 08-07 HYDRAULICS - CYLINDER, LOADER CLAM 08-08 HYDRAULICS - CYLINDER, BACKHOE STABILIZER (WITHOUT PILOT CONTROLS) 08-08A HYDRAULICS - CYLINDER, BACKHOE STABILIZER (WITH PILOT CONTROLS) 08-09 HYDRAULICS - CYLINDER, BACKHOE SWING (WITHOUT PILOT CONTROLS) 08-09A HYDRAULICS - CYLINDER, BACKHOE SWING (WITH PILOT CONTROLS) 08-10 HYDRAULICS - CYLINDER, BACKHOE BOOM 08-10A HYDRAULICS - BACKHOE BOOM LOCK AND ELECTRICAL CIRCUIT 08-11 HYDRAULICS - CYLINDER, BACKHOE DIPPER 08-12 HYDRAULICS - CYLINDER, BACKHOE BUCKET (MODELS WITHOUT EXTENDABLE DIPPER) 08-13 HYDRAULICS - CYLINDER, BACKHOE BUCKET (MODELS WITH EXTENDABLE DIPPER) 08-14 HYDRAULICS - CYLINDER, BACKHOE EXTENDABLE DIPPER 08-15 HYDRAULICS - VALVE, PILOT CONTROL AND JOYSTICKS (6 SPOOL, W/O EXT DIPPER, W/O AUX HYDS) 08-16 HYDRAULICS - VALVE, PILOT CONTROL AND JOYSTICKS (6 SPOOL, W/O EXT DIPPER, W/ AUX HYDS) 08-17 HYDRAULICS - VALVE, PILOT CONTROL AND JOYSTICKS (7 SPOOL, W/ EXT DIPPER, W/O AUX HYDS) 08-18 HYDRAULICS - VALVE, PILOT CONTROL AND JOYSTICKS (7 SPOOL, W/ EXT DIPPER, W/ AUX HYDS) 08-19 HYDRAULICS - VALVE, PILOT CONTROL AND JOYSTICKS (7 SPOOL, W/O EXT DIPPER, W/ AUX HYDS)

TABLE OF CONTENTS 08-20 HYDRAULICS - VALVE, PILOT CONTROL AND JOYSTICKS (8 SPOOL, W/ EXT DIPPER, W/ AUX HYDS) 08-21 HYDRAULICS - PILOT CONTROL JOYSTICKS 08-22 HYDRAULICS - PILOT CONTROLS 08-23 HYDRAULICS - BACKHOE AUXILIARY 08-24 HYDRAULICS - BACKHOE AUXILIARY 08-25 HYDRAULICS - RIDE CONTROL (87433240 SOLENOID VALVE) 08-26 HYDRAULICS - COUPLER, LOADER TOOL QUICK 08-27 HYDRAULICS - COUPLER, LOADER TOOL QUICK 08-28 VALVE, COUPLER (87435909) - LOADER TOOL 08-29 PUMP, EQUIPMENT HYDRAULIC 08-30 VALVE ASSY - LOADER CONTROL, TWO SPOOL 08-31 VALVE ASSY - LOADER CONTROL, THREE SPOOL 08-32 VALVE ASSY - BACKHOE CONTROL, 6 SPOOL (W/O EXT DIPPER, W/O AUX HYDS, W/O PILOT CONTROLS) 08-33 VALVE ASSY - BACKHOE CONTROL, 7 SPOOL (W/O EXT DIPPER, W/ AUX HYDS, W/O PILOT CONTROLS) 08-34 VALVE ASSY - BACKHOE CONTROL, 7 SPOOL (W/ EXT DIPPER, W/O AUX HYDS, W/O PILOT CONTROLS) 08-35 VALVE ASSY - BACKHOE CONTROL, 8 SPOOL (W/ EXT DIPPER, W/ AUX HYDS, W/O PILOT CONTROLS) 08-36 VALVE ASSY - BACKHOE CONTROL, 6 SPOOL (W/O EXT DIPPER, W/ OR W/O AUX HYDS, W/ PILOT CONTROLS) 08-37 VALVE ASSY - BACKHOE CONTROL, 7 SPOOL (W/ EXT DIPPER, W/ OR W/O AUX HYDS, W/ PILOT CONTROLS) 08-38 VALVE ASSY - BACKHOE CONTROL, 7 SPOOL (W/O EXT DIPPER, W/ AUX HYDS, W/ PILOT CONTROLS) 08-39 VALVE ASSY - BACKHOE CONTROL, 8 SPOOL (W/ EXT DIPPER, W/ AUX HYDS, W/ PILOT CONTROLS) 08-40 VALVE SECTION - BACKHOE SWING (WITH PILOT CONTROLS) 08-41 VALVE SECTION - BACKHOE BOOM (WITH PILOT CONTROLS) 08-42 VALVE SECTION - BACKHOE STABILIZER (WITH PILOT CONTROLS) 08-43 VALVE SECTION - BACKHOE DIPPER (WITH PILOT CONTROLS) 08-44 VALVE SECTION - BACKHOE BUCKET (WITH PILOT CONTROLS) 08-45 VALVE SECTION - EXTENDABLE DIPPER (WITH PILOT CONTROLS) 08-46 VALVE SECTION - OPTIONS, AUXILIARY HYDRAULICS (WITH PILOT CONTROLS) 08-47 VALVE ASSY, PRESSURE REDUCING (2 SPOOL) (WITH PILOT CONTROLS) 08-48 VALVE ASSY, PRESSURE REDUCING (3 SPOOL) (WITH PILOT CONTROLS) 08-49 VALVE ASSY, PRESSURE REDUCING (4 SPOOL) (WITH PILOT CONTROLS) 08-50 VALVE, JOYSTICK (PILOT CONTROLS) (LEFT-HAND) WITH HORN BUTTON 08-51 VALVE, JOYSTICK (PILOT CONTROLS) (LEFT-HAND) WITH HORN & UNI-DIRECTIONAL BUTTONS 08-52 VALVE, JOYSTICK (PILOT CONTROLS) (LEFT-HAND) WITH HORN & BI-DIRECTIONAL BUTTONS 08-53 VALVE, JOYSTICK (PILOT CONTROLS) (RIGHT-HAND) WITHOUT EXTENDABLE DIPPER 08-54 VALVE, JOYSTICK (PILOT CONTROLS) (RIGHT-HAND) WITH EXTENDABLE DIPPER 08-55 VALVE ASSY - SWING CUSHION (DAMPENING) 08-55A SOLENOID VALVE - BOOM LOCK 08-56 ACCUMULATOR ASSY - RIDE CONTROL 08-57 FILTER ASSY, OIL

TABLE OF CONTENTS 08-58 CYLINDER ASSY - LOADER LIFT 08-59 CYLINDER ASSY - LOADER BUCKET 08-60 CYLINDER ASSY - LOADER CLAM 08-61 CYLINDER ASSY - BACKHOE STABILIZER 08-62 CYLINDER ASSY - BACKHOE SWING 08-63 CYLINDER ASSY - BACKHOE BOOM 08-64 CYLINDER ASSY - BACKHOE DIPPER 08-65 CYLINDER ASSY - BACKHOE BUCKET 08-66 CYLINDER ASSY - BACKHOE EXTENDABLE DIPPER 09-01 CONTROLS - LOADER LIFT AND BUCKET 09-02 CONTROLS - LOADER CLAM 09-03 CONTROLS - LOADER SELF-LEVELING 09-04 FRAME - LOADER LIFT 09-05 FRAME - LOADER LINKAGE 09-06 BUCKETS, LOADER LONG LIP (82 IN) 09-07 BUCKET, LOADER LONG LIP (93 IN) 09-08 BUCKET, LOADER CLAM 09-09 GUARD - VALVE, LOADER 09-10 COUPLER, TOOL QUICK 09-11 COVERS - BACKHOE CONTROL TOWER, WITHOUT PILOT CONTROLS 09-12 BACKHOE CONTROL TOWER SUPPORT AND SEALS, WITHOUT PILOT CONTROLS 09-13 BACKHOE CONTROL TOWER SUPPORT, WITH PILOT CONTROLS 09-14 BACKHOE CONTROL TOWER BOOTS AND SEALS, WITH PILOT CONTROLS 09-15 BACKHOE CONTROL TOWER LEVERS (BOOM LATCH), WITH PILOT CONTROLS 09-16 CONTROLS - BACKHOE, WITH FOOT SWING (MODELS WITHOUT EXTENDABLE DIPPER) 09-17 CONTROLS - BACKHOE, WITH FOOT SWING (MODELS WITH EXTENDABLE DIPPER) 09-18 CONTROLS - BACKHOE, WITH HAND SWING (MODELS WITHOUT EXTENDABLE DIPPER) 09-19 CONTROLS - BACKHOE, WITH HAND SWING (MODELS WITHOUT EXTENDABLE DIPPER) 09-19A CONTROLS - BACKHOE, EXCAVATOR CONTROL PATTERN 09-20 CONTROLS - BACKHOE, WITH HAND SWING (MODELS WITH EXTENDABLE DIPPER) 09-21 CONTROLS - BACKHOE AUXILIARY HYDRAULICS, WITHOUT PILOT CONTROLS 09-22 BACKHOE - STABILIZERS, PLATES AND PADS 09-23 BACKHOE - SWING TOWER AND SWING CYLINDERS 09-24 BACKHOE - BOOM AND SWING TOWER 09-25 BOOM LATCH (WITHOUT PILOT CONTROLS) 09-25A BOOM LATCH (WITH PILOT CONTROLS) 09-26 BACKHOE - DIPPER AND BUCKET 09-27 BACKHOE - DIPPER, EXTENDABLE 09-28 BUCKET, UNIVERSAL BACKHOE (305 MM (12 INCH) WIDE) 09-29 BUCKET, UNIVERSAL BACKHOE (406 MM (16 INCH) WIDE) 09-30 BUCKET, UNIVERSAL BACKHOE (457 MM (18 INCH) WIDE) 09-31 BUCKET, BACKHOE (457 MM (18 INCH) WIDE) 09-32 BUCKET, UNIVERSAL BACKHOE (610 MM (24 INCH) / 762 MM (30 INCH) WIDE) 09-33 BUCKET, BACKHOE (610 MM (24 INCH) WIDE) 09-34 BUCKET, UNIVERSAL BACKHOE (914 MM (36 INCH) WIDE) 09-35 BUCKET, UNIVERSAL BACKHOE (610 MM (24 INCH) WIDE) 09-35A FROST POINT ASSEMBLY 09-36 COUNTERWEIGHT, FRONT

TABLE OF CONTENTS 09-37 CHASSIS / MOUNTS, POD - SCREEN, AIR INLET 09-38 TANK, OIL - BOX, BATTERY AND TOOL 09-39 RADIATOR WRAPPER 09-40 HOOD - PANELS, SIDE 09-41 HOOD - GRILLE 09-42 PLATES, FLOOR - FLOORMATS 09-43 FENDER COVER, LEFT-HAND - PANEL, REAR CLOSURE (STORAGE TRAY WITH CUP HOLDER) 09-44 FENDER EXTENSIONS 09-45 GUARD, MUD 09-46 SEAT - MOUNTING 09-47 SEAT ASSY, STANDARD 09-48 SEAT SUPPORT AND PEDESTAL, STANDARD 09-49 SEAT ASSY, MECHANICAL SUSPENSION 09-50 SEAT PEDESTAL AND SUSPENSION, MECHANICAL SUSPENSION 09-51 SEAT ASSY, AIR SUSPENSION 09-52 SEAT PEDESTAL AND SUSPENSION, AIR SUSPENSION 09-53 CAB - GLASS, MIRROR AND HOLD OPEN 09-54 CAB - FRAME AND COVERS 09-55 CAB - DOORS, IF USED (SEE GLASS AND HINGES; REF 4, 27, 29) 09-55A CAB - DOORS, IF USED (SEE GLASS AND HINGES; REF 4, 27, 29) 09-56 CAB - DOOR MOUNTING 09-57 CAB - WINDOW, RIGHT-HAND, FOR SINGLE DOOR CAB FRAMES, IF USED (SEE GLASS AND HINGES; REF 1, 5, 6) 09-57A CAB - WINDOW, RIGHT-HAND, FOR SINGLE DOOR CAB FRAMES, IF USED (SEE GLASS AND HINGES; REF 1, 5, 6) 09-58 CAB - WINDOW, REAR 09-59 CAB - WASHER, WINDSHIELD 09-60 CAB - WIPERS 09-61 CAB HEADLINER - FILTER, LOUVERS, DOME LAMP 09-62 CAB - FILTER, AIR 09-63 CAB - BLOWER HOUSING, VENTILATION DUCTS, DRAIN LINES 09-64 CAB - HEATER 09-65 CAB - AIR CONDITIONING LINES, EVAPORATOR CORE 09-66 CAB - AIR CONDITIONING, CONDENSER, RECEIVER-DRIER 09-67 CAB - AIR CONDITIONING COMPRESSOR 09-68 CANOPY, ROPS - FRAME, COVERS, MIRROR, VISOR 09-69 CANOPY, ROPS - GLASS 09-70 CANOPY, ROPS - WIPER, FRONT AND WINDSHIELD WASHER 09-71 MIRROR, REAR VIEW - MOUNTING, CAB MODELS 09-72 SLOW MOVING VEHICLE EMBLEM 09-73 DECALS 09-74 DECALS 09-75 DECALS 09-76 DECALS - ENGLISH 09-77 DECALS - LATIN AMERICAN SPANISH 09-78 DECALS - CANADIAN FRENCH 09-79 DECALS - ENGLISH 09-80 DECALS - LATIN AMERICAN SPANISH 09-81 DECALS - CANADIAN FRENCH

I GENERAL INFORMATION PROPRIETARY NOTICE The contents of this manual are proprietary data of this company. Reproduction or use of any part for other than the operation and maintenance of our equipment is permissible only if expressly authorized in writing. Additional copies may be obtained from your dealer. Address requests for copies to your Dealer and refer to the publication part number appearing on the bottom of the rear catalog cover or on the title page. COMPANY POLICY Company policy, which is one of continuous improvement, reserves the right to change prices and to make changes in design and specification at any time without notice and without obligation to modify units previously built. All data given in this book is subject to production variations. Dimensions and weights are approximate only and the illustrations do not necessarily show machines in standard condition. For exact information about any particular machine please consult your dealer. PARTS AND ACCESSORIES Genuine parts and accessories have been specifically designed for these machines. We would like to point out that “non-genuine” parts and accessories have NOT been examined and released by the Company. The installation and or use of such products could have negative effects upon the design characteristics of your machine and thereby affect its safety. The company is not liable for any damage caused by the use of “non-genuine” parts and accessories. IMPROVEMENTS We are continually striving to improve our products. We reserve the right to make improvements or changes when it becomes practical and possible to do so, without incurring any obligation to make changes or additions to the equipment sold previously. MODEL CODES The range of machines listed may not be available in all countries or markets therefore, for the latest information consult your local dealer. OWNER ASSISTANCE We want you to be completely satisfied with your investment. Normally any problems with your equipment will be handled by your dealer's Service Department; however, misunderstandings can occur. If your problem has not been handled to your satisfaction, we suggest the following: 1. Contact the owner or General Manager of the dealership, explain the problem, and request assistance. When additional assistance is needed, your dealer has direct access to our office. 2. Provide your dealer with: ● Your Name, Address, and Telephone number ● Machine Model and Serial Number ● Dealership Name and Address ● Machine purchase date and amount of use ● Nature of problem Be aware that your problem will likely be resolved in the dealership using the dealer's facilities, equipment, and personnel. So it is important that your initial contact be with the dealer. SPARE PARTS To maintain operating efficiency, use original spare parts. When ordering parts, give the following information: ● Machine Model ● Machine and Engine Serial Numbers ● Part Number from the Parts Catalog

III HOW TO USE YOUR PARTS CATALOG 1. Figure Number 2. Sequence Code within the Figure Number 3. Page Number within the Sequence Code 4. Date of Printing (month / year) 5. Figure Description 6. General information regarding the figure 7. Parts supplied in repair kits per symbol reference 8. Figure call-out of the part number (REF) 9. Technical specifications relating to the part indicated 10. Figure call-out includes bracketed items, the included items may also be listed in the additional description area 11. Orientation - Arrow indicates front of the machine 12. Footnote - Additional information relating to the part number. In this example, 08-20 equals another figure that this part is shown on 13. Part Number NSS = Not Serviced Separately (Non-serviced parts) Bracketed numbers = not available as service parts in this market 14. Not Available as service part in this market 15. YR/SN Year Before 01/85 = Part valid for production January 1985 and before From 01/85 = Part valid for production from January 1985 and after BTW 01/85 & 02/02 = Part valid for machines produced between January 1985 and February 2002. Serial Number (P.I.N.) BSN JJC0268800 = Part valid for serial number JJC0268800 and below ASN JJC0268800 = Part valid for serial number JJC0268800 and above BTW JJC0178000 & JJC0179000 = Part valid for serial numbers between JJC0178000 & JJC0179000 16. Total Quantity of the Part referred to in the page. The quantity can be replaced by the following indications: AR = As Required X = As required 17. Part Description 18. Additional description of the part to help confirm identification 19. Figure Notes 20. Model Number(s) RIGHT-HAND AND LEFT-HAND The reference to right-hand and left-hand in this catalog is identified by the operator standing at the rear of the basic unit (without rear attachment), looking toward the front of the machine (in normal forward travel). For pages covering any machine attachments, right-hand and left-hand are defined by the operator sitting in the position for proper operation of the attachment. DIMENSIONS Metric and U.S. hardware dimensions do not show the numeric designations of standard coarse threads. A number following a semi colon (;) is the class or grade of hardware. A comma (,) represents the decimal point (.) used in U.S. dimensions.

You're Reading a Preview

CASE 580M Series 2 BACKHOE Loader Parts Catalog Manual

Description

Reviews

Q&A

Recently Viewed