Last Modified: 11-12-2024 6.11:8.1.0 Doc ID: RM100000000VDMU
Model Year Start: 2016 Model: Tacoma Prod Date Range: [08/2015 - ]
Title: INTRODUCTION: HOW TO USE THIS MANUAL: GENERAL INFORMATION; 2016 - 2023 MY Tacoma [08/2015 - ]
GENERAL INFORMATION
1. GENERAL DESCRIPTION
(a) This manual is written in accordance with SAE J2008.
(1) Diagnosis
(2) Removing / Installing, Replacing, Disassembling / Reassembling, Checking and Adjusting
(3) Final Inspection
(b) The following procedures are omitted from this manual. However, these procedures must be performed.
(1) Use a jack or lift to perform operations.
(2) Clean all removed parts.
(3) Perform a visual check.
2. INDEX
(a) An alphabetical INDEX section is provided at the end of the manual as a reference to help you find the item to be repaired.
3. PREPARATION
(a) Use of Special Service Tools (SST) and Special Service Materials (SSM) may be required, depending on the repair
procedure. Be sure to use SST and SSM when they are required and follow the working procedures properly. A list of SST
and SSM is in the "Preparation" section of this manual.
4. REPAIR PROCEDURES
(a) A component illustration is placed under the title where necessary.
(b) Non-reusable parts, grease application areas, precoated parts and torque specifications are noted in the component
illustrations.
The following illustration is an example.
(c) Torque specifications, grease application areas and non-reusable parts are emphasized in the procedures.
HINT:
There are cases where such information can only be explained by using an illustration. In these cases, torque, oil and other
information are described in the illustration.
(d) Only items with key points are described in the text. What to do and other details are explained using illustrations next to
the text. Both the text and illustrations are accompanied by standard values and notices.
Illustration What to do and where to do it
Task heading What work will be performed
Explanation text
How to perform the task
Information such as specifications and warnings, which are written in boldface text
(e) Illustrations of similar vehicle models are sometimes used. In these cases, minor details may be different from the actual
vehicle.
(f) Procedures are presented in a step-by-step format.
5. SERVICE SPECIFICATIONS
(a) SPECIFICATIONS are presented in boldface text throughout the manual. The specifications are also found in the "Service
Specifications" section for reference.
6. TERM DEFINITIONS
CAUTION Possibility of injury to you or other people.
NOTICE Possibility of damage to components being repaired.
HINT Provides additional information to help you perform repairs.
7. INTERNATIONAL SYSTEM OF UNITS
(a) The units used in this manual comply with the International System of Units (SI UNIT) standard. Units from the metric
system and the English system are also provided.
Example:
Torque:
30 N·m {310 kgf·cm, 22 ft·lbf}
Last Modified: 11-12-2024 6.11:8.1.0 Doc ID: RM100000000VDMV
Model Year Start: 2016 Model: Tacoma Prod Date Range: [08/2015 - 11/2017]
Title: INTRODUCTION: IDENTIFICATION INFORMATION: VEHICLE IDENTIFICATION AND SERIAL NUMBERS; 2016 - 2017 MY
Tacoma [08/2015 - 11/2017]
VEHICLE IDENTIFICATION AND SERIAL NUMBERS
1. VEHICLE IDENTIFICATION NUMBER
(a) The vehicle identification number is stamped on the vehicle body and on the certification label, as shown in the illustration.
A:
Vehicle Identification Number
B:
Certification Label
2. ENGINE SERIAL NUMBER AND TRANSMISSION SERIAL NUMBER
(a) The engine serial number is stamped on the cylinder block of the engine and the transmission serial number is stamped on
the housing as shown in the illustration.
(1) Engine Serial Number
Text in Illustration
*A 2TR-FE *B 2GR-FKS
*a Engine Serial Number - -
(2) Transmission Serial Number
Text in Illustration
*A R156F *B RC62F
*C AC60E *D AC60F
*a Transmission Serial Number - -
Last Modified: 11-12-2024 6.11:8.1.0 Doc ID: RM1000000018R4D
Model Year Start: 2018 Model: Tacoma Prod Date Range: [11/2017 - 12/2019]
Title: INTRODUCTION: IDENTIFICATION INFORMATION: VEHICLE IDENTIFICATION AND SERIAL NUMBERS; 2018 - 2020 MY
Tacoma [11/2017 - 12/2019]
VEHICLE IDENTIFICATION AND SERIAL NUMBERS
1. VEHICLE IDENTIFICATION NUMBER
(a) The vehicle identification number is stamped on the vehicle body and on the certification label, as shown in the illustration.
A:
Vehicle Identification Number
B:
Certification Label
2. ENGINE SERIAL NUMBER AND TRANSMISSION SERIAL NUMBER
(a) The engine serial number is stamped on the cylinder block of the engine and the transmission serial number is stamped on
the housing as shown in the illustration.
(1) Engine Serial Number
*A 2TR-FE *B 2GR-FKS
*a Engine Serial Number - -
(2) Transmission Serial Number
*A AC60E *B AC60F
*C RC62F - -
*a Transmission Serial Number - -
Last Modified: 11-12-2024 6.11:8.1.0 Doc ID: RM100000001MQQV
Model Year Start: 2020 Model: Tacoma Prod Date Range: [12/2019 - ]
Title: INTRODUCTION: IDENTIFICATION INFORMATION: VEHICLE IDENTIFICATION AND SERIAL NUMBERS; 2020 - 2023 MY
Tacoma [12/2019 - ]
VEHICLE IDENTIFICATION AND SERIAL NUMBERS
1. VEHICLE IDENTIFICATION NUMBER
(a) The vehicle identification number is stamped on the vehicle body and on the certification label, as shown in the illustration.
A:
Vehicle Identification Number
B:
Certification Label
2. ENGINE SERIAL NUMBER AND TRANSMISSION SERIAL NUMBER
(a) The engine serial number is stamped on the cylinder block of the engine and the transmission serial number is stamped on
the housing as shown in the illustration.
(1) Engine Serial Number
*A 2TR-FE *B 2GR-FKS
*a Engine Serial Number - -
(2) Transmission Serial Number
*A AC60E *B AC60F
*C RC62F - -
*a Transmission Serial Number - -
Last Modified: 11-12-2024 6.11:8.1.0 Doc ID: RM100000000VDMW
Model Year Start: 2016 Model: Tacoma Prod Date Range: [08/2015 - ]
Title: INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION; 2016 - 2023 MY Tacoma [08/2015 - ]
PRECAUTION
1. BASIC REPAIR HINT
(a) HINTS ON OPERATIONS
1 Attire
Always wear a clean uniform.
A hat and safety shoes must be worn.
2 Vehicle protection Prepare a grille cover, fender cover, seat cover and floor mat before starting the operation.
3 Safe operation
When working with 2 or more persons, be sure to check safety for one another.
When working with the engine running, make sure to provide ventilation for exhaust fumes
in the workshop.
If working on high temperature, high pressure, rotating, moving, or vibrating parts, wear
appropriate safety equipment and take extra care not to injure yourself or others.
When jacking up the vehicle, be sure to support the specified location with a safety stand.
When lifting up the vehicle, use appropriate safety equipment.
4 Preparation of tools and
measuring gauge
Before starting the operation, prepare a tool stand, SST, gauge, oil and parts for replacement.
5 Removal and installation,
disassembly and assembly
operations
Diagnose with a thorough understanding of proper procedures and of the reported problem.
Before removing parts, check the general condition of the assembly and for deformation and
damage.
When the assembly is complicated, take notes. For example, note the total number of
electrical connections, bolts, or hoses removed. Add matchmarks to ensure reassembly of
components to their original positions. Temporarily mark hoses and their fittings if needed.
Clean and wash the removed parts if necessary and assemble them after a thorough check.
6 Removed parts
Place removed parts in a separate box to avoid mixing them up with new parts or
contaminating new parts.
For non-reusable parts such as gaskets, O-rings, and self-locking nuts, replace them with
new ones as instructed in this manual.
Retain the removed parts for customer inspection, if requested.
7* Checks to perform after
work is finished
Make sure that removed and installed parts (oil filler cap, level dipstick, floor mat, etc.) are
properly installed/tightened.
Make sure that none of the cloths or tools that were used have been left in the engine
compartment or within the vehicle.
Check that there are no oil leaks.
CAUTION:
*: Be sure to perform these checks properly, Not performing these checks properly after finishing work can lead to serious accident
or injury.
(b) JACKING UP AND SUPPORTING VEHICLE
(1) Care must be taken when jacking up and supporting the vehicle. Be sure to lift and support the vehicle at the proper locations.
(c) PRECOATED PARTS
(1) Precoated parts are bolts and nuts that are coated with a seal lock adhesive at the factory.
(2) If a precoated part is retightened, loosened or moved in any way, it must be recoated with the specified adhesive.
(3) When reusing a precoated part, clean off the old adhesive and dry the part with compressed air. Then apply new seal lock
adhesive appropriate to that part.
(4) Some seal lock agents harden slowly. You may have to wait for the seal lock adhesive to harden.
(d) GASKETS
(1) When necessary, use a sealer on gaskets to prevent leaks.
(e) BOLTS, NUTS AND SCREWS
(1) Carefully follow all the specifications for tightening torques. Always use a torque wrench.
(f) FUSES
You're Reading a Preview
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$57.99
2021 Toyota Tacoma Service & Repair Manual
Viewed 54 Times Today
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$57.99
Secure transaction
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
Description
The 2021 Toyota Tacoma Service & Repair Manual is a comprehensive technical guide designed for both professional mechanics and DIY enthusiasts. It provides detailed instructions, diagrams, and specifications for troubleshooting, repair, and maintenance of the Toyota Tacoma.
- Covers the technical aspects of the vehicle, including engine, transmission, suspension, brakes, and electrical systems
- Includes step-by-step procedures for routine maintenance, repairs, and troubleshooting
- Packed with diagrams, illustrations, and technical details for a complete understanding of the vehicle's inner workings
- Suitable for both professional mechanics and DIY enthusiasts looking for a comprehensive guide to their vehicle's maintenance and repair
This detailed manual is an essential resource for anyone who wants to gain a deeper understanding of their Toyota Tacoma and perform repairs and maintenance tasks with confidence.
