1. Supplemental Restraint
System “Airbag”
Airbag system wiring harness is routed on and
along body panels.
CAUTION:
I All Airbag system wiring harness and con-
nectors are colored yellow. Do not use electri-
cal test equipment on these circuits.
I Be careful not to damage Airbag system wir-
ing harness when repairing the body panel.
2. Body Datum Points
Various master repair locations are established as
datum points used during body repairs. In addition,
guide holes, locators and indents are provided to
facilitate panel replacement and achieve alignment
accuracy.
NOTE:
Left and right datum points are all symmetrical to
each other.
A: ENGINE COMPARTMENT AND ROOM
B5M0187B
(0) Cowl panel weather attaching
hole 6 mm (0.24 in) dia.
(1) Hood hinge front attaching hole
M8
(2) Strut mount attaching hole (Front
center) 9.5 mm (0.374 in) dia.
(3) Front fender attaching hole (Tip)
M6
(4) Rear upper surface of front side
frame 12 mm (0.47 in) dia.
(5) Middle upper surface of front
side frame 20 mm (0.79 in) dia.
(6) Front side frame front upper sur-
face 14 × 16 mm (0.55 × 0.63 in)
dia. oblong hole
(7) Side frame of front side frame 12
mm (0.47 in) dia.
(8) Headlight attaching hole at radia-
tor side panel 6.2 × 9 mm (0.244
× 0.35 in) dia.
(9) Radiator panel side (LWR)
gauge hole 23 mm (0.91 in) dia.
(23) Rear strut mount attaching hole
(Side) 10 mm (0.39 in) dia.
(24) Rear strut mount attaching hole
(Center) 12 mm (0.47 in) (0.244
× 0.35 in) dia.
(25) Radiator panel (UPR) middle
hole 6 mm (0.24 in) dia.
(26) Front fender attaching hole at
radiator panel side M6
(27) Front fender attaching hole at
front pillar lower portion M6
(28) Hinge middle hole at front pillar
center 10 mm (0.39 in) dia.
(29) Front fender attaching hole at
front pillar center portion M6
(30) Retainer attaching square hole
at front pillar 7 × 7 mm (0.28 ×
0.28 in)
(31) Retainer attaching hole at center
pillar (Front) 3.5 mm (0.138 in)
dia.
(32) Retainer attaching hole at center
pillar (Rear) 3.5 mm (0.138 in)
dia.
2
5-1 [S100] SPECIFICATIONS AND SERVICE DATA
1. Supplemental Restraint System “Airbag”
You're Reading a Preview
What's Included?
Lifetime Access
Fast Download Speeds
Offline Viewing
Access Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$31.99
1998-2003 Subaru Liberty Legacy Outback Service & Repair Manual
Viewed 14 Times Today
What's Included?
Lifetime Access
Fast Download Speeds
Offline Viewing
Access Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$31.99
Secure transaction
What's Included?
Lifetime Access
Fast Download Speeds
Offline Viewing
Access Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
Description
- Subaru Liberty / Legacy / Outback Workshop Manual 1998 - 2003
- Complete FSM 1998 - 2003
- 3rd Generation
- Covers the Outback, Legacy, and Liberty
- Engines Covered:
- 2.0L
- 2.5L
- 3.0L
- 1-H4SO
- 2-H6DO
- 3-H4DOSTC
- Now includes a 2nd manual covering the 1998 Legacy Outback with the 2.2L and 2.5L engines
- FAQ: What type of information is covered?
- This manual contains all the information and diagrams for all service and repair procedures. It includes General Information, Maintenance, Engine Mechanical, Engine Lubrication & Cooling Systems, Engine Fuel & Emission Control System, Accelerator Control, Fuel and Exhaust Systems, Clutch, Manual Transmission, Automatic Transmission, Propeller Shaft & Differential Carrier, Front Axle, Rear Axle, Front Suspension, Rear Suspension, Brake System, Steering System, Restraint System, Body and Trim, Heater, Air Conditioner, and Electrical System.
- FAQ: What format is the file in?
- The file is a RAR file, you need " " installed to extract it. You can download it from here: http://home.exetel.com.au/vz/wrar393.exe
- FAQ: What if I have problems ing?
- When ing large files (if using IE directly) you may experience timeout sometimes. If this happens, I suggest using a manager (Flashget, etc.) to avoid this. If you still have problems, please contact us.
- Format: PDF
- Language: English
