Valtra M & T Series Tractors Complete Workshop Service Repair Manual

10 20 30 40 50 60 70 80 90 100 M120 M130 M150 T120 T130 T140, T160 T170 T180 T190 Tractors Valtra Inc. FIN---44200 Suolahti, FINLAND Phone +358 2045501 Telefax +358 204550387 www.valtra.com General Engine Electrical system Power transmission Front axle and steering system Brakes Frame and wheels Cab and shields Hydraulics Service Manual Tools

Order no 39 230 211 ENGLISH

10. General 11. Layout 12. Construction 13. Maintanance 14. General technical specifications

5 To the reader The Service Manual is intended to be a practical reference source to be used in workshop. The repair instructions in the manual are based on methods which have been worked out in practice during normal workshop conditions and which are based on the use of special tools from the manufacturer when stated in the instructions. The manual also contains descriptions of the design and function of the components. Detailed maintenance instructions can be found in Operator’s Manual. The Service Manual will be continually updated with new revised pages which should be inserted in the manual. Alterations and additions will first appear as service bulletins. Only genuine Valmet spare parts should be used to ensure the best possible function of the machine. Cer- tain operations should be carried out with the aid of special tools designed by Valmet. Valtra Inc. Tractor Service

Model Code Page 11. Layout 110 1 2.1.2004 T120-- T190 M120-- M150 7 The following supplements have been published for the Valtra T and M---series Service Manual: Order number Date of publication Notes

Model Code Page 11. Layout 110 2 2.1.2004 T120-- T190 M120-- M150 8

Model Code Page 11. Layout 110 3 2.1.2004 T120-- T190 M120-- M150 9 Layout of Service Manual Division into groups The manual is divided into groups (10---100) which are based on the make---up of the tractor. The groups are listed on the first index leaf. Example. 10. General 20. Engine, fuel and cooling systems 30. Electrical system 40. Power transmission a.s.o. The number designation for each group is given in the top left box of the respective pages (and the first figure in the code designation). 410 1 50 60 70 80 90 100 Code Page Division into components or sub--groups Each group is further divided into components or sub ---groups. The number and the name of each component is given in the top left box on each page (and comprise the two first figures in the code designation). Example. 41. Clutch 42. Gearbox 44. Low gear 45. Final drives etc.

Model Code Page 11. Layout 110 4 2.1.2004 T120-- T190 M120-- M150 10 Tractor model At the top of each page it is indicated for which tractor the page is valid. Code designation Three---digit code designations are used to separate the different document groups for the respective components. The same code is also used in the Time list as a reference to the text in this manual. The code designation numbers appear in the box at the top of the page and also in the headings. Example: Code 410 --- Group: power transmission (4) --- Component: clutch (41) --- Document group: general (410) Page numbers The instructions for all components are numbered in consecutive order in the right---hand box at the top of the page. The page numbers begin with page 1 for each component. 41. Clutch 15. 5. 1993 Model Code Page 205 --- 665 410 1 Date At the top of each page there are two boxes for dates. In a case of revised issue, the date of the earlier issue is printed in the crossed---over box and and the date of the current issue is printed in the proper date box. Additions and amendments of the service manual New and up---dated pages will be continuously added to the service manual. The new pages should be inserted as indicated by the code: the first digit (also the first digit on the index leaf) indicates the group: --- the two first digits indicate the component or sub---group. --- the third digit indicates the document group for the respective components --- the page number indicates the definite position of the page within the service manual. If there are two pages with the same code and page number, it is the page with the later date in the date box and the old date in the crossed---over box which is valid or which is the current page. When an entirely new set of repair instructions is issued, it will be accompanied by instructions on where the pages should be inserted in the file.

Valtra M & T Series Tractors Complete Workshop Service Repair Manual

You're Reading a Preview

Recently Viewed