How To Use Figure Search
1). Locate the figure list index at the beginning of manual
examples:
01A01 FRONT WHEEL ASSEMBLY -
2100,2110,2120,2150,2300,2310,3055,3100,3120,3150,3190,3300,3310,3550,4140
01A01[C] FRONT WHEEL ASSEMBLY, W/16" WHEELS - 3400, 3500, 3550, 4400,
4500, 4410, 5100, 5200, 5190, 7100, 7200
01B01 STANDARD REAR WHEELS - 2000, 4100 & 3000 EXCEPT 3550
01B01[A] STANDARD REAR WHEELS - 3500, 3550, 5000, 7000, 4000 EXCEPT 4110
01B02 POWER ADJUSTABLE REAR WHEELS - 2000, 3000, 4140
Use the “search” feature in adobe to jump to the figure number.
Press Ctrl key, and letter F on the keyboard, at the same time. This will bring up the
“search” feature in Adobe Acrobat. Then simply type in the figure number you wish to
locate, and press enter.
Adobe takes you immediately to that page!
Figure Search for TL80 TRACTOR (10/98- )
Figure Search for TL80 TRACTOR (10/98- )
DEALER STOCK NO. AMER. INITIAL PARTS STOCKING LIST
MAIN MAIN SECTION
MPARTS[01] MAINTENANCE PARTS
SEC. 01 ENGINE 1/2
SEC. 01 ENGINE 2/2
SEC. 02 ENGINE EQUIP.
SEC. 03 TRANSMISSION
SEC. 04 FRONT AXLE
SEC. 05 REAR AXLE
SEC. 06 ELECTRICAL
SEC. 07 HYDRAULICS
SEC. 08 SHEET METAL
SEC. 09 LINKAGE
SEC. 10 DRIVER'S COMPARTMENT 1/3
SEC. 10 DRIVER'S COMPARTMENT 2/3
SEC. 10 DRIVER'S COMPARTMENT 3/3
SEC. 11 TRACTION
0.0040/1[01] VARIATION
0.0040/2[01] VARIATION
0.0040[01] VARIATION
0.02.1/ 1[01] (VAR.007) NASO - MOTORS CONFORM TO EMISSION RULES
0.02.1/ 3[01] (VAR.039) STANDARD - EMISSIONIZED ENGINE
0.02.1/ 4[01] (VAR.123) EMISSIONIZED ENGINE
0.02.1/ 4[02] (VAR.123) EMISSIONIZED ENGINE
0.02.1/ 5[01] (VAR.123/1) EMISSIONIZED ENGINE - POWER SHUTTLE VERSION
0.02.1/ 6[01] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - MOTORS AND FLYWHEEL
0.02.1/ 7[01] (VAR.727) SYNCHRO MESH GEARED POWER TAKE -OFF 540 RPM - CLUTCH AND P.T.O. SHAFTS
0.02.1/ 8[01] (VAR.729) SYNCHRO MESH GEARED POWER TAKE -OFF 540 - 750 - 1000 RPM - SHAFT CLUTCH AND P.T.O.
0.02.1[01] ENGINE
0.04.0[01] CRANKCASE AND CYLINDERS
0.04.0[02] CRANKCASE AND CYLINDERS
0.04.2[01] OIL SUMP
0.04.2[02] OIL SUMP
0.04.3[01] ENGINE COVERS & GASKETS
0.04.3[02] ENGINE COVERS & GASKETS
0.06.0/ 1[01] (VAR.123) EMISSIONIZED ENGINE - CYLINDER HEAD AND ROTATING WEIGHTS
0.06.0[01] CYLINDER HEAD
0.06.0[02] CYLINDER HEAD
0.06.0[03] CYLINDER HEAD
0.07.1/ 1[01] (VAR.204) LOW TEMPERATURE STARTING AIDS
0.07.1[01] INTAKE MANIFOLD
0.07.6[01] EXHAUST MANIFOLD
0.08.0[01] CRANKSHAFT - FLYWHEEL
0.08.1[01] CONNECTION ROD
0.08.2/ 1[01] (VAR.123) EMISSIONIZED ENGINE - PISTON, RINGS AND PIN
0.08.2[01] PISTONS
0.08.4[01] CAMSHAFT & GEARS
0.10.5[01] DYNAMIC BALANCER, GEARS & SHAFTS
Page 1
Figure Search for TL80 TRACTOR (10/98- )
Figure Search for TL80 TRACTOR (10/98- )
0.10.5[02] DYNAMIC BALANCER, GEARS & SHAFTS
0.14.0/ B[01] FUEL SYSTEM - INJECTION PUMP
0.14.0/ B[02] FUEL SYSTEM - INJECTION PUMP
0.14.0/ B[03] FUEL SYSTEM - INJECTION PUMP
0.14.0/ E[01] FUEL SYSTEM - INJECTOR
0.14.0/ E[02] FUEL SYSTEM - INJECTOR
0.14.0/ E[03] FUEL SYSTEM - INJECTOR
0.14.0/ F[01] FUEL SYSTEM - INJECTOR
0.14.0/ H[01] (VAR.123) EMISSIONIZED ENGINE - INJECTION PUMP - PARTS
0.14.0/ I[01] (VAR.123) EMISSIONIZED ENGINE - INJECTION PUMP - PARTS
0.14.0/ I[02] (VAR.123) EMISSIONIZED ENGINE - INJECTION PUMP - PARTS
0.14.0/ I[03] (VAR.123) EMISSIONIZED ENGINE - INJECTION PUMP - PARTS
0.14.0/ I[04] (VAR.123) EMISSIONIZED ENGINE - INJECTION PUMP - SHIMS
0.14.0/ I[05] (VAR.123) EMISSIONIZED ENGINE - INJECTION PUMP - SHIMS
0.14.0/ I[06] (VAR.123) EMISSIONIZED ENGINE - INJECTION PUMP - SHIMS
0.14.0/ I[07] (VAR.123) EMISSIONIZED ENGINE - INJECTION PUMP - SHIMS
0.14.0/ L[01] (VAR.123) EMISSIONIZED ENGINE - INJECTION PUMP
0.14.0/ M[01] (VAR.123) EMISSIONIZED ENGINE - INJECTION PUMP - PARTS
0.14.0/ M[02] (VAR.123) EMISSIONIZED ENGINE - INJECTION PUMP - PARTS
0.14.0/ M[03] (VAR.123) EMISSIONIZED ENGINE - INJECTION PUMP - PARTS
0.14.0/ 1[01] (VAR.123) EMISSIONIZED ENGINE - INJECTION PUMP, PIPES AND NOZZLE
0.14.0[01] FUEL SYSTEM - INJECTION PUMP
0.14.0[02] FUEL SYSTEM - INJECTION PUMP
0.14.0[03] FUEL SYSTEM - INJECTION PUMP
0.20.0/ 1[01] (VAR.130) FUEL FILTER
0.20.0[01] FUEL FILTER - FUEL PUMP
0.20.3[01] FUEL LINES
0.30.0[01] OIL PUMP
0.30.5[01] OIL LINES- OIL LEVEL GAUGE - PIPING - OIL COOLER
0.32.0[01] WATER PUMP
0.32.6[01] TEMPERATURE CONTROL (THERMOSTAT)
0.34.7/ 1[01] (VAR.174) FAN VISCOSTATIC JOINT (WITH CAB)
0.34.7[01] FAN
0.35.0[01] BELT PULLEY DRIVE & COVER
0.36.0/ A[01] STARTER MOTOR
0.36.0/ B[01] STARTER MOTOR
0.36.0/ C[01] STARTER MOTOR
0.36.0[01] STARTER MOTOR
0.40.0/ A[01] ALTERNATOR
0.40.0/ B[01] ALTERNATOR
0.40.0/ C[01] ALTERNATOR
0.40.0[01] ALTERNATOR
0.42.0[01] TACHOMETER DRIVE
0.88.0/ A[01] (VAR.641) AIR CONDITIONING - COMPRESSOR - PARTS
0.88.0[01] (VAR.641-623) AIR CONDITIONING - BELTS & PULLEYS
1.10.0[01] THROTTLE CONTROL LINKAGE - (W/O CAB) - LEVER, PEDAL, CABLE
1.10.0[02] THROTTLE CONTROL LINKAGE - (W/O CAB) - FLEXIBLE CABLE, LEVER
1.10.0[03] THROTTLE CONTROL LINKAGE - (W/O CAB) - LEVER SUPPORTS, LEVER
Page 2
Figure Search for TL80 TRACTOR (10/98- )
Figure Search for TL80 TRACTOR (10/98- )
1.14.0[01] FUEL TANK - PIPING
1.14.7/ 1[01] (VAR.131-132) FIRE SHIELD AND TANK
1.14.7/ 2[01] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - TANK SUPPORT
1.14.7[01] FUEL TANK SUPPORT - BRACKETS, TIE-RODS - SUPPORTS
1.15.1/ 1[01] (VAR.199) SELF-CLEANING FILTER (WITH CAB)
1.15.1/ 1[02] (VAR.199) SELF-CLEANING FILTER (W/CAB)
1.15.1[01] MUFFLER - W/CAB - GUARDS
1.15.1[03] SILENCER (MUFFLER) - L/CAB - EXTENSION, GUARDS
1.17.0[01] RADIATOR AND COOLING TANK
1.17.2[01] RADIATOR HOSES
1.17.5 RADIATOR PROTECTIVE SEALS - CONVEYOR, GUARDS
1.19.1/ 1[01] (VAR.194) OIL BATH AIR CLEANER (W/O CAB)
1.19.1/ 1A[01] (VAR.194) OIL BATH AIR CLEANER (W/O CAB)
1.19.1[01] DRY AIR CLEANER PIPES
1.19.1[02] DRY AIR CLEANER PIPES - THERMOSTARTER
1.21.0/ 1[01] (VAR.113-119-119/1) SYNCHRONIZED CREEPER AND REVERSER UNIT - CLUTCH BOX
1.21.0/ 2[01] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - CLUTCH BOX
1.21.0/ 3[01] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - BOXES
1.21.0[01] TRACTOR BODY - CLUTCH BOX AND RELEVANT PARTS
1.21.0[02] TRACTOR BODY - BOX, CAPS
1.21.1/ 1[01] (VAR.039) STANDARD - AXLE SUPPORT (4WD)
1.21.1[01] AXLE FASTENING FRONT SUPPORT
1.25.0/ A[01] CLUTCH - PARTS
1.25.0/ 3[01] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - COUPLING, SHAFT AND COVER
1.25.0[01] CLUTCH - SHAFT, RETAINING RINGS
1.25.3[01] P.T.O. ENGAGEMENT CLUTCH - SHAFT, SLEEVE
1.26.2[01] FRICTION CLUTCH CONTROL, COUPLING FORK, LEVERS & TIE-RODS
1.27.1/ 1[01] (VAR.274) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 40 KM/H HYDRAULIQUE P.T.O.- (4WD) - GEARS
1.27.1/ 1[02] (VAR.274) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 40 KM/H HYDRAULIQUE P.T.O.- (4WD) - CLUTCH
SHAFT
1.27.1/ 2[01] (VAR.275) POWER SHUTTLE - HI-LO - 40KM\H-HYDRAULIC PTO - GEARS
1.27.1/ 3[01] (VAR.274-276) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H P.T.O. - CLUTCH SHAFT
1.27.1/ 4[01] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO -- GEARS
1.27.1/ 5[01] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - DRIVE SHAFTS
1.27.1/ 5[02] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - DRIVEN SHAFT & CLUTCH
1.27.1/ 5[03] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - SHAFTS AND GEARS
1.27.1[01] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - GEARS
1.27.1[02] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - CLUTCH SHAFT
1.27.1[03] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - GEARS
1.27.1[04] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - SHAFTS & BEARINGS
1.27.2[01] (VAR272) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - GEARS & ELECTRIC CABLE
1.27.3/ 1[01] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - CLUTCH AND PARTS
1.27.3/ 1[02] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - MANIFOLD & UNIONS
1.27.3/ 1[03] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - OIL FILTER & PIPES
1.27.3[01] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - MANIFOLD AND PIPES
1.27.3[02] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - DRIVEN SHAFT
1.27.4[01] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - CONTROL PARTS
1.27.4[02] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - CONTROL VALVE PIPES
Page 3
Figure Search for TL80 TRACTOR (10/98- )
Figure Search for TL80 TRACTOR (10/98- )
1.27.4[03] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - CONTROL VALVE
1.27.4[04] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - CONTROL VALVE
1.27.7/ 1[01] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - HEAT EXCHANGER & PIPES
1.27.7[01] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - HEAT EXCHANGER
1.27.7[02] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - HEAT EXCHANGER
1.28.1/ 1[01] (VAR.109-110) SYNCHRONIZED MECHANICAL REVERSER UNIT - SHAFTS AND GEARS
1.28.1/ 1[02] (VAR.109-110) SYNCHRONIZED MECHANICAL REVERSER UNIT - SHAFTS AND GEARS
1.28.1/ 1[03] (VAR.109-110) SYNCHRONIZED MECHANICAL REVERSER UNIT - 4WD - SHAFTS AND GEARS
1.28.1/ 2[01] (VAR.113-119-119/1) SYNCHRONIZED CREEPER AND REVERSER UNIT - SHAFTS AND GEARS
1.28.1/ 2[02] (VAR.113-119-119/1) SYNCHRONIZED CREEPER AND REVERSER UNIT - SHAFTS AND GEARS
1.28.1/ 2[03] (VAR.113-119-119/1) SYNCHRONIZED CREEPER AND REVERSER UNIT - SHAFTS AND GEARS
1.28.1/ 2[04] (VAR.113-119-119/1) SYNCHRONIZED CREEPER AND REVERSER UNIT - 4WD - SHAFTS AND GEARS
1.28.1/ 3[01] (VAR.119/1) SYNCHRONIZED CREEPER AND REVERSER UNIT 200 M/H - SHAFTS AND GEARS
1.28.1/ 4[01] (VAR.273-277) MECHANICAL OVER-DRIVE (40 KM/H) - 4WD - CLUTCH SHAFT & GEARS
1.28.1/ 4[02] (VAR.273-277) MECHANICAL OVER-DRIVE (40 KM/H) - 4WD - DRIVEN SHAFT & COVER
1.28.1[01] TRANSMISSION GEARS - GEARBOX SHAFT, GEARINGS
1.28.1[02] TRANSMISSION GEARS - DRIVEN SHAFT, SYNCHRO
1.28.1[04] TRANSMISSION GEARS - GEARS
1.29.0/ 1[01] (VAR.109-110) SYNCHRONIZED MECHANICAL REVERSER UNIT - CONTROL FORK
1.29.0/ 2[01] (VAR.113-119-119/1) SYNCHRONIZED CREEPER AND REVERSER UNIT - ROD AND FORK
1.29.0/ 3[01] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - ROD AND FORK
1.29.0/ 4[01] (VAR.273-277) MECHANICAL OVER-DRIVE (40 KM/H) - 4WD - CONTROL FORK AND PARTS
1.29.0/ 5[01] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - ROD AND FORK
1.29.0[01] TRANSMISSION INTERNAL SHIFTING CONTROLS - RODS, FORKS
1.29.1[01] TRANSMISSION ESTERNALSHIFTING CONTROLS - LOWER LEVER, ROD
1.32.0[01] CASINGS, COVERS AND SUPPORTS
1.32.1/ 1[01] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - SLEEVES
1.32.1/ 3[01] (VAR.308/1) FRONT AXLE CL. 2 HYDR. LOCKING 40 KM/H HYDR. REAR DRIVE - REAR BEVEL GEAR PAIR
1.32.1/ 4[01] (VAR.320) HIGH SPEED RING GEAR AND PINION - 4WD - REAR BEVEL GEAR PAIR
1.32.1/ 5[01] (VAR.322) HIGH SPEED RING GEAR AND PINION - 4WD - REAR BEVEL GEAR PAIR
1.32.1/ 6[01] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - REAR BEVEL GEAR
PAIR
1.32.1/ 6[02] (VAR.325) ELECTROHYD. FRONT DIFFENT. LOCK 40 KM/H, BRAKES AND MUDGUARDS - SHAFTS AND BEVEL
GEAR PAIR
1.32.1[01] CENTRAL REDUCTION GEARS - SLOW SPEED DRIVEN GEAR
1.32.1[02] CENTRAL REDUCTION GEARS - MEDIUM SPEED ENGAGING GEAR
1.32.1[03] CENTRAL REDUCTION GEARS - ADJUSTING SHIMS
1.32.2[01] CENTRAL REDUCTION GEARS CONTROLS - RODS & FORKS, RELEVANT PARTS
1.32.4/ 1[01] (VAR.308-308/1) FRONT AXLE CL.2 HYDR. LOCKING 30-40 KM/H HYDR. REAR DRIVE- BEVEL GEAR PAIR
1.32.4/ 2[01] (VAR.415) FRONT AXLE CL. 2/BRAKE, FRONT MUDGARD HYDR. DIFF. LOCK. HYDR. TRANSM. - BEVEL GEAR PAIR
1.32.4/ 3[01] (VAR.451) STIFFENED SIDE REDUCTION UNITS - DIFFERENTIAL AND RELEVANT PARTS, BEVEL GEAR PAIR
1.32.4[02] DIFFERENTIAL GEARS - PARTS
1.32.6/ 1[01] (VAR.007) NASO - POWER TAKEOFF - ROD AND FORKS
1.32.6/ 3[01] (VAR.308-308/1) FRONT AXLE CLASS 2 HYDR. LOCKING 30-40 KM/H HYDR. REAR DRIVE - ROD AND FORK
1.32.6/ 4[01] (VAR.296) (HI-LO) AND SYNCHR. REVERSING GEAR - 30 KM/H WITH DIFF. HYDR.LOCKING - ROD AND FORK
1.32.6/ 5[01] (VAR.415) FRONT AXLE CL. 2/BRAKE, FRONT MUDGARD HYDR. DIFF. LOCK. HYDR. TRANSM. - ROD AND FORK
1.32.6/ 6[01] (VAR.727) SYNCHRO MESH GEARED POWER TAKE -OFF 540 RPM - ROD AND FORK
1.32.6/ 7[01] (VAR.729) SYNCHRO MESH GEARED POWER TAKE -OFF 540 - 750 - 1000 RPM - ROD AND FORK
Page 4
Figure Search for TL80 TRACTOR (10/98- )
Figure Search for TL80 TRACTOR (10/98- )
1.32.6[01] DIFFERENTIAL LOCK - RODS & FORKS
1.33.0[01] IDLER CASE & COVERS - 4WD
1.33.1[01] IDLER GEARS - 4WD - GEARS
1.33.1[02] IDLER GEARS - 4WD - PTO SHAFT
1.33.2/ 1[01] (VAR.007) NASO - POWER TAKEOFF - SOLENOID VALVES & SUPPORT
1.33.2/ 4[01] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRON. REVERSING GEAR - 30-40 KM/H - CONTROL VALVE
1.33.2/ 5[01] (VAR.274) (HI-LO) AND SYNCHRONIZED REVERS. GEAR - 40 KM/H HYDR. P.T.O.- (4WD) - SOLENOID VALVE SUPP.
1.33.2/ 6[01] (VAR.274-276) (HI-LO) AND SYNCHRON. REVERSING GEAR - 30-40 KM/H P.T.O. - SOLENOID VALVE SUPP.
1.33.2/ 8[01] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDR. PTO - PIPES & VALVE SUPPORT
1.33.2/ 8[02] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - VALVE SUPPORT
1.33.2/ 8[03] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDR. PTO - FRONT DIFFERENTIAL LOCK PIPES
1.33.2/ 9[01] (VAR.296) (HI-LO) AND SYNCHRONIZED REVERS. GEAR - 30 KM/H WITH DIFFER. HYDR.LOCKI - SOLENOID VALVE
1.33.2/10[01] (VAR.308-308/1) FRONT AXLE CL. 2 HYDR. LOCKING 30-40 KM/H HYDR. REAR DRIVE - PIPES
1.33.2/11[01] (VAR.322) HIGH SPEED RING GEAR AND PINION - 4WD - PIPES
1.33.2/12[01] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - PIPES
1.33.2/13[01] (VAR.327-327/1) FRONT DIFFERENTIAL HYDRAULIC LOCKING - PIPES
1.33.2/14[01] (VAR.415) FRONT AXLE CL. 2/BRAKE, FRONT MUDGARD HYDR. DIFF. LOCK. HYDR. TRANSM. - PIPES
1.33.2/15[01] (VAR.422) VERSION FOR JAPAN - HYDRAULIC LINES - PIPES
1.33.2/16[01] (VAR.727) SYNCHRO MESH GEARED POWER TAKE -OFF 540 RPM - LEVERS
1.33.2/16[02] (VAR.727) SYNCHRO MESH GEARED POWER TAKE -OFF 540 RPM - VALVE SUPPORT
1.33.2/17[01] (VAR.729) SYNCHRO MESH GEARED POWER TAKE -OFF 540 - 750 - 1000 RPM - CONTROL LEVERS
1.33.2/17[02] (VAR.729) SYNCHRO MESH GEARED POWER TAKE -OFF 540 - 750- 1000 RPM - VALVE SUPPORT
1.33.2[01] IDLER CONTROLS - 4WD - PIPES & SOLENOID VALVES
1.33.2[02] IDLER CONTROLS - 4WD - VALVE SUPPORT & PIPES
1.34.2/ 1[01] (VAR.109-110) SYNCHRONIZED MECHANICAL REVERSER UNIT -LEVER, CROSS-PIECE AND PARTS
1.34.2/ 2[01] (VAR.113-119-119/1) SYNCHRONIZED CREEPER AND REVERSER UNIT - CROSS-PIECE AND PARTS
1.34.2/ 2[02] (VAR.113-119-119/1) SYNCHRONIZED CREEPER AND REVERSER UNIT - CROSS-PIECE AND PARTS
1.34.2/ 3[01] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRON. REVERSING GEAR - 30-40 KM/H - CROSS-PIECE AND PARTS
1.34.2/ 4[01] (VAR.273-277) MECHANICAL OVER-DRIVE (40 KM/H) - 4WD - CROSS-PIECE AND PARTS
1.38.5/ 2[01] (VAR.449) PADDY FIELD VERSION - 4WD - FRONT DRIVE SHAFT
1.38.5[01] PROPELLER SHAFT - 4WD - GUARD
1.40.0/ 1[01] FRONT AXLE CASING - 4WD - BOX & RELEVANT PARTS
1.40.0/ 2[01] FRONT AXLE - STEERING KNUCKLES-HUBS-4WD
1.40.0/ 4[01] FRONT AXLE - SUPPORT-ROD-4WD
1.40.0/ 6[01] FRONT AXLE - BEVEL GEAR PINION SET - 4 WD
1.40.0/ 6[02] FRONT AXLE - BEVEL GEAR/PINION SET - 4WD - ADJUSTING SHIMS
1.40.0/ 6[03] FRONT AXLE - BEVEL GEAR/PINION SET - 4WD - ADJUSTING SHIMS
1.40.0/ 7[01] FRONT AXLE-DIFFERENTIAL - 4WD - PARTS
1.40.0/ 8[01] (VAR.308-308/1) FRONT AXLE CL.2 HYDR. LOCKING 30-40 KM/H HYDR. REAR DRIVE - SUPPORT PARTS
1.40.0/10[01] FRONT AXLE - DIFFERENTIAL GEARS AND SHAFT - 4WD - HALF-SHAFTS - C4689
1.40.0/10[01A] FRONT AXLE - DIFFERENTIAL GEARS AND SHAFT - 4WD - HALF- SHAFT - D4689
1.40.0/10[02] FRONT AXLE - DIFFERENTIAL GEARS AND SHAFT - 4WD - EPICYCLIC REDUCTION GEAR
1.40.0/101[01] (VAR.039) STANDARD - FRONT AXLE - DIFFERENTIAL GEARS AND SHAFT - 4WD
1.40.0/101[02] (VAR.039) STANDARD - FRONT AXLE - GEARS AND DIFFERENTIAL SHAFT - 4WD
1.40.0/103[01] (VAR.308-308/1) FRONT AXLE CL. 2 HYDR. LOCKING 30-40 KM/H HYDR. REAR DRIVE - HALF SHAFTS
1.40.0/103[02] (VAR.308-308/1) FRONT AXLE CL. 2 HYDR. LOCKING 30-40 KM/H HYDR. REAR DRIVE - REDUCTION GEARS
1.40.0/104[01] (VAR.322) HIGH SPEED RING GEAR AND PINION - 4WD - HALF SHAFT- C4689
1.40.0/104[02] (VAR.322) HIGH SPEED RING GEAR AND PINION - 4WD - HALF SHAFTS - D4689
Page 5
Figure Search for TL80 TRACTOR (10/98- )
Figure Search for TL80 TRACTOR (10/98- )
1.40.0/105[01] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - HALF SHAFTS - C4689
1.40.0/105[02] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - HALF SHAFTS - D4689
1.40.0/105[04] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - BRAKE PARTS
1.40.0/106[01] (VAR.327-327/1) FRONT DIFFERENTIAL HYDRAULIC LOCKING - HALF SHAFTS - C4689
1.40.0/106[02] FRONT DIFFERENTIAL HYDRAULIC LOCKING - HALF SHAFTS - D4689
1.40.0/107[01] (VAR.327/1) ELECTROHYD. FRONT DIFFENTIAL LOCK, BRAKES AND MUDGUARDS - HALF SHAFTS - C4689
1.40.0/107[02] (VAR.327/1) ELECTROHYD. FRONT DIFFENTIAL LOCK, BRAKES AND MUDGUARDS - HALF SHAFTS - D4689
1.40.0/107[04] (VAR.327/1) ELECTROHYD. FRONT DIFFENTIAL LOCK, BRAKES AND MUDGUARDS - BRAKE PARTS
1.40.0/108[01] (VAR.415) FRONT AXLE CL. 2/BRAKE, FRONT MUDGARD HYDR. DIFF. LOCK. HYDR. TRANSM. - RIM, GEARS
1.40.0/11[01] (VAR.308-308/1) FRONT AXLE CLASS 2 HYDR. LOCKING 30-40 KM/H HYDR. REAR DRIVE - AXLE BOX
1.40.0/12[02] FRONT AXLE - HYDRAULIC STEERING CYLINDER - 4WD - PARTS
1.40.0/12[03] FRONT AXLE - HYDRAULIC STEERING CYLINDER - 4WD - PIPES
1.40.0/121[01] (VAR.039) STANDARD - FRONT AXLE - HYDRAULIC STEERING CYLINDER - 4WD
1.40.0/121[02] STANDARD - FRONT AXLE - HYDRAULIC STEERING CYLINDER - 4WD (VAR.039)
1.40.0/123[01] (VAR.308-308/1) FRONT AXLE CL.2 HYDR. LOCKING 30-40 KM/H HYDR. REAR DRIVE - CYLINDERS
1.40.0/123[02] (VAR.308-308/1) FRONT AXLE CL. 2 HYDR. LOCK. 30-40 KM/H HYDR. REAR DRIVE - PIPES
1.40.0/124[01] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - CYLINDERS AND
PIPES
1.40.0/125[01] (VAR.415) FRONT AXLE CL. 2/BRAKE, FRONT MUDGARD HYDR. DIFF. LOCK. HYDR.TRANSM. - POWER STEER.
CYLIN.
1.40.0/126[02] (VAR.422) VERSION FOR JAPAN - POWER STEERING CYLINDER,PARTS
1.40.0/13[01] (VAR.039) STANDARD - FRONT AXLE CASING - 4WD
1.40.0/14[01] (VAR.415) FRONT AXLE CL. 2/BRAKE, FRONT MUDGARD HYDR. DIFF. LOCK. HYDR. TRANSM. - FRONT AXLE
1.40.0/21[01] (VAR.039) STANDARD - FRONT AXLE - STEERING KNUCKLES-HUBS-4WD
1.40.0/22[01] (VAR.308-308/1) FRONT AXLE CL.2 HYDR. LOCKING 30-40 KM/H HYDR. REAR DRIVE - STEERING PIVOT PIN
1.40.0/23[01] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - STEERING PIVOT PIN
1.40.0/24[01] (VAR.327/1) ELECTROHYD. FRONT DIFFENTIAL LOCK, BRAKES AND MUDGUARDS - STEERING PIVOT PIN
1.40.0/25[01] (VAR.415) FRONT AXLE CL. 2/BRAKE, FRONT MUDGARD HYDR. DIFF. LOCK. HYDR.TRANSM. - STEERING PIVOT
PIN
1.40.0/41[01] (VAR.039) STANDARD - FRONT AXLE - SUPPORT-ROD-4WD
1.40.0/43[01] (VAR.308-308/1) FRONT AXLE CL.2 HYDR. LOCKING 30-40 KM/H HYDR. REAR DRIVE - STEERING TIE-ROD
1.40.0/44[01] (VAR.322) HIGH SPEED RING GEAR AND PINION - 4WD - BEVEL GEAR PAIR & SUPPORT
1.40.0/44[03] (VAR.322) HIGH SPEED RING GEAR AND PINION - 4WD - SLEEVES AND COVER PLATE
1.40.0/45[01] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - SUPPORT
1.40.0/45[03] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - SLEEVES
1.40.0/46[01] (VAR.327-327/1) FRONT DIFFERENTIAL HYDRAULIC LOCKING - SUPPORT AND SHIMS
1.40.0/46[03] (VAR.327-327/1) FRONT DIFFERENTIAL HYDRAULIC LOCKING - SLEEVES AND COVER PLATE
1.40.0/47[01] (VAR.415) FRONT AXLE CL. 2/BRAKE, FRONT MUDGARD HYDR. DIFF. LOCK. HYDR. TRANSM. - STEERING
TIE-ROD
1.40.0/47[02] (VAR.415) FRONT AXLE CL.2/BRAKE, FRONT MUDGARD HYDR. DIFF. LOCK. HYDR. TRANSM. - DIFFER. COVER
PLATE
1.40.0/61[01] (VAR.039) STANDARD - FRONT AXLE - BEVEL GEAR PINION SET - 4 WD
1.40.0/63[01] (VAR.308-308/1) FRONT AXLE CLASS 2 HYDR. LOCKING 30-40 KM/H HYDR. REAR DRIVE - FRONT BEVEL GEAR
PAIR
1.40.0/63[02] (VAR.308-308/1) FRONT AXLE CL.2 HYDR. LOCKING 30-40 KM/H HYDR. REAR DRIVE - ADJUSTING SHIMS
1.40.0/63[03] (VAR.308-308/1) FRONT AXLE CL.2 HYDR. LOCKING 30-40 KM/H HYDR. REAR DRIVE - ADJUSTING SHIMS
1.40.0/64[01] (VAR.308/1) FRONT AXLE CL. 2 HYDR. LOCKING 40 KM/H HYDR. REAR DRIVE - FRONT BEVEL GEAR PAIR
1.40.0/65[01] (VAR.320) HIGH SPEED RING GEAR AND PINION - 4WD - FRONT BEVEL GEAR PAIR
Page 6
Figure Search for TL80 TRACTOR (10/98- )
Figure Search for TL80 TRACTOR (10/98- )
1.40.0/66[01] (VAR.322) HIGH SPEED RING GEAR AND PINION - 4WD - FRONT BEVEL GEAR PAIR
1.40.0/67[01] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - FRONT BEVEL GEAR
PAIR
1.40.0/68[01] (VAR.415) FRONT AXLE CL. 2/BRAKE, FRONT MUDGARD HYDR. DIFF. LOCK. HYDR. TRANSM. - BEVEL GEAR PAIR
1.40.0/68[02] (VAR.415) FRONT AXLE CL. 2/BRAKE, FRONT MUDGARD HYDR. DIFF. LOCK. HYDR. TRANSM. - ADJUSTING
SHIMS
1.40.0/71[01] (VAR.039) STANDARD - SELF-LOCKING DIFFERENTIAL
1.40.0/73[01] (VAR.308-308/1) FRONT AXLE CL.2 HYDR. LOCKING 30-40 KM/H HYDR. REAR DRIVE - BOX AND SIDE PINIONS
1.40.0/74[01] (VAR.322) HIGH SPEED RING GEAR AND PINION - 4WD - BOX AND SIDE PINIONS
1.40.0/75[01] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - BOX AND SIDE
PINIONS
1.40.0/76[01] (VAR.327-327/1) FRONT DIFFERENTIAL HYDRAULIC LOCKING - BOX AND SIDE PINIONS
1.40.0/77[01] (VAR.415) FRONT AXLE CL. 2/BRAKE, FRONT MUDGARD HYDR. DIFF. LOCK. HYDR. TRANSM. - DIFFERENTIAL
BOX
1.41.0/ A[01] FRONT AXLE - 2-WD - POWER STEERING CYLINDER - PARTS
1.41.0/ B[01] FRONT AXLE - 2-WD - TRANSVERSAL STEERING TIE-ROD
1.41.0[01] FRONT AXLE - 2WD - HUBS
1.41.0[02] FRONT AXLE - 2-WD - STEERING ROD & PIPES
1.42.0/ A[01] FRONT AXLE - OIL PUMP - RELEVANT PARTS
1.42.0/ B[01] FRONT AXLE - OIL PUMP - RELEVANT PARTS
1.42.0/ D[01] (VAR.274-276) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H P.T.O. - OIL PUMP AND
COMPONENTS
1.42.0/ 1[01] FRONT AXLE - 4-WD - POWER STEERING HYDRAULIC CONTROL - PIPES & OIL FILTER
1.42.0/ 1[02] FRONT AXLE - 4-WD - POWER STEERING HYDRAULIC CONTROL - PIPES & BRACKETS
1.42.0/ 2[01] (VAR.007) NASO - POWER STEERING TANK & PIPES
1.42.0/ 2[02] (VAR.007) NASO - POWER STEERING FILTER & PIPES
1.42.0/ 5[01] (VAR.296) (HI-LO) AND SYNCHR. REV. GEAR - 30 KM/H WITH DIFF. HYDR.LOCKING - POWER STEERING TANK
1.42.0/ 5[02] (VAR.296) (HI-LO) AND SYNCHR. REV. GEAR - 30 KM/H WITH DIFF. HYDR. LOCKING - FILTER AND PIPES
1.42.0/ 6[01] (VAR.727) SYNCHRO MESH GEARED POWER TAKE -OFF 540 RPM - FILTER AND PIPES
1.42.0/ 7[01] (VAR.729) SYNCHRO MESH GEARED POWER TAKE -OFF 540 - 750 - 1000 RPM - FILTER & PIPES
1.42.0[01] FRONT AXLE - 2-WD - POWER STEERING HYDRAULIC CONTROL - PUMP & PIPESD
1.42.0[02] FRONT AXLE - 2-WD - POWER STEERING HYDRAULIC CONTROL - PIPES & BRAKETS
1.43.0/ 1[01] (VAR.327/1) ELECTROHYD. FRONT DIFFENTIAL LOCK, BRAKES AND MUDGUARDS
1.43.0/ 2[01] (VAR.415) FRONT AXLE CL. 2/BRAKE, FRONT MUDGARD HYDR. DIFF. LOCK. HYDR. TRANSM. - MUDGUARD
1.43.0/ 3[01] (VAR.495) FRONT MUDGUARDS- 4WD - SUPPORTS - ARMS
1.43.0/ 4[01] (VAR.860) FRONT MUDGUARDS - 2WD
1.43.0/ 4[02] (VAR.860) FRONT FENDERS - 2WD
1.43.0[01] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - MUDGUARDS
1.44.0[01] (VAR.225-226-227) FRONT SUPPORT AND BALLAST
1.48.0[01] BOX - SIDE REDUCTION GEAR SPACERS
1.48.1/ 1[01] (VAR.308-308/1) FRONT AXLE CL. 2 HYDR. LOCKING 30-40 KM/H HYDR. REAR DRIVE - GEAR BOX
1.48.1/ 1[02] (VAR.308-308/1) FRONT AXLE CL. 2 HYDR. LOCKING 30-40 KM/H HYDR. REAR DRIVE - WHEEL AXLE
1.48.1/ 2[01] (VAR.415) FRONT AXLE CL. 2/BRAKE, FRONT MUDGARD HYDR. DIFF. LOCK., HYDR. TRANSM.
1.48.1/ 2[02] (VAR.415) FRONT AXLE CL. 2/BRAKE, FRONT MUDGARD HYDR. DIFF. LOCK. HYDR. TRANSM. - ADJUSTING SHIMS
1.48.1/ 3[01] (VAR.422) VERSION FOR JAPAN - FWD SHAFT - SIDE REDUCTION GEAR BOX, SHAFT
1.48.1/ 4[01] (VAR.449) PADDY FIELD VERSION - SIDE REDUCTION GEAR BOX, SHAFT
1.48.1/ 5[01] (VAR.451) STIFFENED SIDE REDUCTION UNITS - REDUCTION GEAR HALF SHAFT
1.48.1/ 5[02] (VAR.451) STIFFENED SIDE REDUCTION UNITS - BOX AND FORK
Page 7
Figure Search for TL80 TRACTOR (10/98- )
Figure Search for TL80 TRACTOR (10/98- )
1.48.1[03] FINAL DRIVE, GEARS AND SHAFTS
1.48.1[04] FINAL DRIVE, GEARS AND SHAFTS
1.48.2[01] (VAR. 465-470-471) REAR BALLAST
1.65.3[01] TRANSMISSION BRAKE - PARTS
1.65.5/ 1[01] PARKING BRAKE - 4WD
1.65.5[01] PARKING BRAKE - 2WD
1.65.5[02] PARKING BRAKE - 2WD
1.67.2[01] HANDBRAKE CONTROL
1.68.5/ 1[01] BRAKE PIPING
1.68.5/ 2[01] (VAR.007) NASO - BRAKE PIPES
1.68.5/ 4[01] (VAR.296) (HI-LO) AND SYNCHR. REV. GEAR - 30 KM/H WITH DIFF. HYDR.LOCKING - BRAKE PIPES
1.68.5/ 5[01] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - BRAKE PIPES
1.68.5/ 5[03] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - BRAKE PIPES
1.68.5/ 6[01] (VAR.327/1) ELECTROHYD. FRONT DIFFENTIAL LOCK, BRAKES AND MUDGUARDS - BRAKE PIPES
1.68.5/ 6[03] (VAR.327/1) ELECTROHYD. FRONT DIFFENTIAL LOCK, BRAKES AND MUDGUARDS - BRAKE PIPES
1.68.5/ 7[01] (VAR.415) FRONT AXLE CL. 2/BRAKE, FRONT MUDGARD HYDR. DIFF. LOCK. HYDR. TRANSM. - BRACKETS, PIPES
1.68.5/ 7[02] (VAR.415) FRONT AXLE CL. 2/BRAKE, FRONT MUDGARD HYDR. DIFF. LOCK. HYDR. TRANSM. - VALVE, PIPES
1.68.5/ 8[01] (VAR.727) SYNCHRO MESH GEARED POWER TAKE -OFF 540 RPM - BRAKES PIPES
1.68.5/ 9[01] (VAR.729) SYNCHRO MESH GEARED POWER TAKE -OFF 540 - 750 - 1000 RPM - BRAKE PIPES
1.68.5[01] BRAKE PIPING - 2 WD
1.74.1[01] BATTERY MOUNTING - BATTERY
1.74.3/ 1[01] (VAR.007) NASO - BATTERY FASTENING
1.74.3/ 3[01] (VAR.039) STANDARD - BATTERY FASTENING
1.74.3/ 4[01] (VAR.710) VERSION FOR OVERSIZED BATTERY - SUPPORTS - BOX AND LADDER
1.74.3/ 5[01] (VAR.712) NASO - BATTERY FASTENING
1.75.0/ 1[01] (VAR.007) NASO - ELECTRIC PARTS
1.75.0/ 2[01] (VAR.727) SYNCHRO MESH GEARED POWER TAKE -OFF 540 RPM - ELECTRIC COMPONENTS
1.75.0/ 3[01] (VAR.729) SYNCHRO MESH GEARED POWER TAKE -OFF 540 - 750 - 1000 RPM - ELECTRIC PARTS
1.75.0/ 4[01] (VAR.745-746) DIGITAL INSTRUMENT CLUSTER (WITH CAB) - ELECTRIC CABLES - SENSORS
1.75.0/ 5[01] (VAR.746/1) DIGITAL UNIT FOR HYDR. P.T.O. (POWER-SHUTTLE)
1.75.0[01] PTO ELECTRIC CONTROLS - LIGHT SWITCH
1.75.1/1[01] (VAR.007) NASO - REAR ELECTRIC PARTS
1.75.1/3[01] (VAR.039) STANDARD - ELECTRIC SYSTEM CONTROLS
1.75.1/4[01] (VAR. 743-749-753) RADAR
1.75.1[01] OUTLET, CONTROL PANEL AND STEERING COLUMN COVER
1.75.1[02] HORN & AUXILIARY POWER SOCKETS
1.75.3[01] BATTERY CABLES
1.75.4/ A[01] FUSE BOX
1.75.4/ 1[01] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - ELECTRIC CABLES
1.75.4/ 2[01] (VAR.372) TRAILER BRAKE VALVE (ITALY) - SOLENOID VALVE
1.75.4[01] VARIOUS ELECTRIC CABLES-C4547 S/N 1188704
1.75.4[02] VARIOUS ELECTRIC CABLES-C4547 S/N 1188704
1.75.4[03] VARIOUS ELECTRIC CABLES-D4547 S/N 1188705
1.75.4[04] VARIOUS ELECTRIC CABLES-D4547 S/N 1188705
1.75.6[01] LIGHTING COMPONENTS
1.75.6[02] LIGHTING COMPONENTS - (W/O CAB)
1.75.6[03] LIGHTING COMPONENTS - (W/O CAB)
1.77.0[01] CONNECTOR, CABLE TERMINAL
Page 8
You're Reading a Preview
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$52.99
NEW HOLLand TL80 Tractor MASTER ILLUSTRATED Parts LIST Manual BOOK
Viewed 24 Times Today
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$52.99
Secure transaction
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
Description
This is a comprehensive illustrated master parts list manual for the New Holland model TL80 Ag Tractor. It contains detailed parts explosions, exploded views, and breakdowns of all part numbers for various aspects of these TL80 New Holland ag tractors, including detailed engine parts breakdowns.
The manual covers the following areas of the machine:
- General
- Engine
- Engine Equipment
- Transmission
- Front Axle and Steering
- Rear Axle
- Electrical System
- Hydraulic System
- Sheet Metal
- Implement Lift
- Operators Platform and Cab
- Wheels Tracks
- Decals
The manual is indexed and divided into the following sections for fast navigation:
- Full Machine Text Index
- How To Use Figure Search
- General Information - Abbreviations
- General Information - Metric to Inches Conversion
It also includes attachment parts manuals for TB TL TN and TS series compact tractors, such as 32LA FARM LOADER, 33LA FARM LOADER, 46LB AG LOADER, 52LA FARM LOADER, 7310 QUICK ATTACH FARM LOADER, 7210 QUICK ATTACH FARM LOADER, 7312 QUICK ATTACH FARM LOADER, 7314 QUICK ATTACH FARM LOADER, and 7511 FARM LOADER.
For do-it-yourself tractor parts lookup, parts manuals are essential for understanding how everything fits together. The exploded views will also assist in servicing, rebuilding, teardowns, overhauls, repairs, and adjustments. The manual contains all the original parts information needed to lookup correct part numbers for the entire machine, including engine parts.
This manual is exactly like the original manual made for these New Holland model TL80 ag tractors, with the only difference being that this one is not paper and doesn't need to be shipped. There's no wasted time waiting for a paper book or CD to arrive in the mail. You get it right away! It can be zoomed, printed, saved, and closed. Print a few pages at a time as needed; no need to lug that bulky binder around anymore.
Upon purchase, you will immediately receive a link in your email to view, print, and save the manual to your computer for future use. All sections are fully text searchable for lightning-fast and simple navigation. The manual can be viewed in the popular Adobe Acrobat viewer, which most computers already have. To download the free viewer, visit www.adobe.com/reader.
About New Holland
New Holland is a world leader in the design and manufacture of a full line of agricultural tractors and construction equipment, including wheel loaders, excavators, skid steer loaders, backhoe diggers, graders, dump truck haulers, mini compact excavators, and more. Supported by more than 700 dealers with over 1600 outlets in more than 100 countries, New Holland brings together the knowledge and experience of its heritage brands like Sperry New Holland, Versatile, Fiat Kobelco, Kobelco, O&K, Ford New Holland Construction, Fiatallis, Fiat-Hitachi, and Fiat-Kobelco.
New Holland started with one corn mill in the state of Pennsylvania, first built in 1895. The company then expanded into farm implements and later found success with automatic hay balers. Acquired by Ford Tractor Operations in 1985, the Ford New Holland name began to appear on tractors. In 1990, Ford sold a majority interest in its farm machinery operations to a foreign company called FIAT, with the agreement that the Ford name be dropped in ten years.
Tractors began to be released under two names: New Holland in traditional Ford tractor markets, and FIAT in their traditional markets. In 1999, Case IH and FIAT New Holland merged to form CNH Global (Case New Holland), which continues to build tractors under the New Holland brand.
New Holland produces both agricultural farm equipment and heavy construction equipment like backhoes, skid steer loaders, excavators, mini excavators, and wheel loaders. The models included in this Illustrated Master Parts List Manual are the TL80 Ag Tractor.
