How To Use Figure Search
1). Locate the figure list index at the beginning of manual
examples:
01A01 FRONT WHEEL ASSEMBLY -
2100,2110,2120,2150,2300,2310,3055,3100,3120,3150,3190,3300,3310,3550,4140
01A01[C] FRONT WHEEL ASSEMBLY, W/16" WHEELS - 3400, 3500, 3550, 4400,
4500, 4410, 5100, 5200, 5190, 7100, 7200
01B01 STANDARD REAR WHEELS - 2000, 4100 & 3000 EXCEPT 3550
01B01[A] STANDARD REAR WHEELS - 3500, 3550, 5000, 7000, 4000 EXCEPT 4110
01B02 POWER ADJUSTABLE REAR WHEELS - 2000, 3000, 4140
Use the “search” feature in adobe to jump to the figure number.
Press Ctrl key, and letter F on the keyboard, at the same time. This will bring up the
“search” feature in Adobe Acrobat. Then simply type in the figure number you wish to
locate, and press enter.
Adobe takes you immediately to that page!
Figure Search for TL70 TRACTOR (10/98- )
Figure Search for TL70 TRACTOR (10/98- )
DEALER STOCK NO. AMER. INITIAL PARTS STOCKING LIST
MAIN MAIN SECTION
MPARTS[01] MAINTENANCE PARTS
SEC. 01 ENGINE 1/2
SEC. 01 ENGINE 2/2
SEC. 02 ENGINE EQUIP.
SEC. 03 TRANSMISSION
SEC. 04 FRONT AXLE
SEC. 05 REAR AXLE
SEC. 06 ELECTRICAL
SEC. 07 HYDRAULICS
SEC. 08 SHEET METAL
SEC. 09 LINKAGE
SEC. 10 DRIVER'S COMPARTMENT 1/3
SEC. 10 DRIVER'S COMPARTMENT 2/3
SEC. 10 DRIVER'S COMPARTMENT 3/3
SEC. 11 TRACTION
0.0040/1[01] VARIATION
0.0040/2[01] VARIATION
0.0040[01] VARIATION
0.02.1/ 1[01] (VAR.007) NASO - MOTORS CONFORM TO EMISSION RULES
0.02.1/ 4[01] (VAR.123) EMISSIONIZED ENGINE
0.02.1/ 4[02] (VAR.123) EMISSIONIZED ENGINE
0.02.1/ 5[01] (VAR.123/1) EMISSIONIZED ENGINE - POWER SHUTTLE VERSION
0.02.1/ 6[01] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - MOTORS AND FLYWHEEL
0.02.1/ 7[01] (VAR.727) SYNCHRO MESH GEARED POWER TAKE -OFF 540 RPM - CLUTCH AND P.T.O. SHAFTS
0.02.1/ 8[01] (VAR.729) SYNCHRO MESH GEARED POWER TAKE -OFF 540 - 750 - 1000 RPM - SHAFT CLUTCH AND P.T.O.
0.02.1[01] ENGINE
0.04.0[01] CRANKCASE AND CYLINDERS
0.04.0[02] CRANKCASE AND CYLINDERS
0.04.2[01] OIL SUMP
0.04.2[02] OIL SUMP
0.04.3[01] ENGINE COVERS & GASKETS
0.04.3[02] ENGINE COVERS & GASKETS
0.06.0/ 1[01] (VAR.123) EMISSIONIZED ENGINE - CYLINDER HEAD AND ROTATING WEIGHTS
0.06.0[01] CYLINDER HEAD
0.06.0[02] CYLINDER HEAD
0.06.0[03] CYLINDER HEAD
0.07.1/ 1[01] (VAR.204) LOW TEMPERATURE STARTING AIDS
0.07.1[01] INTAKE MANIFOLD
0.07.6[01] EXHAUST MANIFOLD
0.08.0[01] CRANKSHAFT - FLYWHEEL
0.08.1[01] CONNECTION ROD
0.08.2/ 1[01] (VAR.123) EMISSIONIZED ENGINE - PISTON, RINGS AND PIN
0.08.2[01] PISTONS
0.08.4[01] CAMSHAFT & GEARS
0.10.5[01] DYNAMIC BALANCER, GEARS & SHAFTS
0.10.5[02] DYNAMIC BALANCER, GEARS & SHAFTS
Page 1
Figure Search for TL70 TRACTOR (10/98- )
Figure Search for TL70 TRACTOR (10/98- )
0.14.0/ A[01] FUEL SYSTEM - INJECTION PUMP
0.14.0/ A[02] FUEL SYSTEM - INJECTION PUMP
0.14.0/ A[03] FUEL SYSTEM - INJECTION PUMP
0.14.0/ E[01] FUEL SYSTEM - INJECTOR
0.14.0/ E[02] FUEL SYSTEM - INJECTOR
0.14.0/ E[03] FUEL SYSTEM - INJECTOR
0.14.0/ F[01] FUEL SYSTEM - INJECTOR
0.14.0/ H[01] (VAR.123) EMISSIONIZED ENGINE - INJECTION PUMP - PARTS
0.14.0/ I[01] (VAR.123) EMISSIONIZED ENGINE - INJECTION PUMP - PARTS
0.14.0/ I[02] (VAR.123) EMISSIONIZED ENGINE - INJECTION PUMP - PARTS
0.14.0/ I[03] (VAR.123) EMISSIONIZED ENGINE - INJECTION PUMP - PARTS
0.14.0/ I[04] (VAR.123) EMISSIONIZED ENGINE - INJECTION PUMP - SHIMS
0.14.0/ I[05] (VAR.123) EMISSIONIZED ENGINE - INJECTION PUMP - SHIMS
0.14.0/ I[06] (VAR.123) EMISSIONIZED ENGINE - INJECTION PUMP - SHIMS
0.14.0/ I[07] (VAR.123) EMISSIONIZED ENGINE - INJECTION PUMP - SHIMS
0.14.0/ L[01] (VAR.123) EMISSIONIZED ENGINE - INJECTION PUMP
0.14.0/ M[01] (VAR.123) EMISSIONIZED ENGINE - INJECTION PUMP - PARTS
0.14.0/ M[02] (VAR.123) EMISSIONIZED ENGINE - INJECTION PUMP - PARTS
0.14.0/ M[03] (VAR.123) EMISSIONIZED ENGINE - INJECTION PUMP - PARTS
0.14.0/ 1[01] (VAR.123) EMISSIONIZED ENGINE - INJECTION PUMP, PIPES AND NOZZLE
0.14.0[01] FUEL SYSTEM - INJECTION PUMP
0.14.0[02] FUEL SYSTEM - INJECTION PUMP
0.14.0[03] FUEL SYSTEM - INJECTION PUMP
0.20.0/ 1[01] (VAR.130) FUEL FILTER
0.20.0[01] FUEL FILTER - FUEL PUMP
0.20.3[01] FUEL LINES
0.30.0[01] OIL PUMP
0.30.5[01] OIL LINES- OIL LEVEL GAUGE - PIPING - OIL COOLER
0.32.0[01] WATER PUMP
0.32.6[01] TEMPERATURE CONTROL (THERMOSTAT)
0.34.7/ 1[01] (VAR.174) FAN VISCOSTATIC JOINT (WITH CAB)
0.34.7[01] FAN
0.35.0[01] BELT PULLEY DRIVE & COVER
0.36.0/ A[01] STARTER MOTOR
0.36.0/ B[01] STARTER MOTOR
0.36.0/ C[01] STARTER MOTOR
0.36.0[01] STARTER MOTOR
0.40.0/ A[01] ALTERNATOR
0.40.0/ B[01] ALTERNATOR
0.40.0/ C[01] ALTERNATOR
0.40.0[01] ALTERNATOR
0.42.0[01] TACHOMETER DRIVE
0.88.0/ A[01] (VAR.641) AIR CONDITIONING - COMPRESSOR - PARTS
0.88.0[01] (VAR.641-623) AIR CONDITIONING - BELTS & PULLEYS
1.10.0[01] THROTTLE CONTROL LINKAGE - (W/O CAB) - LEVER, PEDAL, CABLE
1.10.0[02] THROTTLE CONTROL LINKAGE - (W/O CAB) - FLEXIBLE CABLE, LEVER
1.10.0[03] THROTTLE CONTROL LINKAGE - (W/O CAB) - LEVER SUPPORTS, LEVER
1.14.0[01] FUEL TANK - PIPING
Page 2
Figure Search for TL70 TRACTOR (10/98- )
Figure Search for TL70 TRACTOR (10/98- )
1.14.7/ 1[01] (VAR.131-132) FIRE SHIELD AND TANK
1.14.7/ 2[01] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - TANK SUPPORT
1.14.7[01] FUEL TANK SUPPORT - BRACKETS, TIE-RODS - SUPPORTS
1.15.1/ 1[01] (VAR.199) SELF-CLEANING FILTER (WITH CAB)
1.15.1/ 1[02] (VAR.199) SELF-CLEANING FILTER (W/CAB)
1.15.1[01] MUFFLER - W/CAB - GUARDS
1.15.1[03] SILENCER (MUFFLER) - L/CAB - EXTENSION, GUARDS
1.17.0[01] RADIATOR AND COOLING TANK
1.17.2[01] RADIATOR HOSES
1.17.5 RADIATOR PROTECTIVE SEALS - CONVEYOR, GUARDS
1.19.1/ 1[01] (VAR.194) OIL BATH AIR CLEANER (W/O CAB)
1.19.1/ 1A[01] (VAR.194) OIL BATH AIR CLEANER (W/O CAB)
1.19.1[01] DRY AIR CLEANER PIPES
1.19.1[02] DRY AIR CLEANER PIPES - THERMOSTARTER
1.21.0/ 1[01] (VAR.113-119-119/1) SYNCHRONIZED CREEPER AND REVERSER UNIT - CLUTCH BOX
1.21.0/ 2[01] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - CLUTCH BOX
1.21.0/ 3[01] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - BOXES
1.21.0[01] TRACTOR BODY - CLUTCH BOX AND RELEVANT PARTS
1.21.0[02] TRACTOR BODY - BOX, CAPS
1.21.1[01] AXLE FASTENING FRONT SUPPORT
1.25.0/ A[01] CLUTCH - PARTS
1.25.0/ 2[01] (VAR.248-249) CLUTCH WITH CERAMETALLIX PADS
1.25.0/ 3[01] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - COUPLING, SHAFT AND COVER
1.25.0[01] CLUTCH - SHAFT, RETAINING RINGS
1.25.3[01] P.T.O. ENGAGEMENT CLUTCH - SHAFT, SLEEVE
1.26.2[01] FRICTION CLUTCH CONTROL, COUPLING FORK, LEVERS & TIE-RODS
1.27.1/ 1[01] (VAR.274) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 40 KM/H HYDRAULIQUE P.T.O.- (4WD) - GEARS
1.27.1/ 1[02] (VAR.274) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 40 KM/H HYDRAULIQUE P.T.O.- (4WD) - CLUTCH
SHAFT
1.27.1/ 2[01] (VAR.275) POWER SHUTTLE - HI-LO - 40KM\H-HYDRAULIC PTO - GEARS
1.27.1/ 3[01] (VAR.274-276) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H P.T.O. - CLUTCH SHAFT
1.27.1/ 4[01] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO -- GEARS
1.27.1/ 5[01] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - DRIVE SHAFTS
1.27.1/ 5[02] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - DRIVEN SHAFT & CLUTCH
1.27.1/ 5[03] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - SHAFTS AND GEARS
1.27.1[01] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - GEARS
1.27.1[02] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - CLUTCH SHAFT
1.27.1[03] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - GEARS
1.27.1[04] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - SHAFTS & BEARINGS
1.27.2[01] (VAR272) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - GEARS & ELECTRIC CABLE
1.27.3/ 1[01] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - CLUTCH AND PARTS
1.27.3/ 1[02] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - MANIFOLD & UNIONS
1.27.3/ 1[03] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - OIL FILTER & PIPES
1.27.3[01] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - MANIFOLD AND PIPES
1.27.3[02] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - DRIVEN SHAFT
1.27.4[01] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - CONTROL PARTS
1.27.4[02] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - CONTROL VALVE PIPES
1.27.4[03] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - CONTROL VALVE
Page 3
Figure Search for TL70 TRACTOR (10/98- )
Figure Search for TL70 TRACTOR (10/98- )
1.27.4[04] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - CONTROL VALVE
1.27.7/ 1[01] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - HEAT EXCHANGER & PIPES
1.27.7[01] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - HEAT EXCHANGER
1.27.7[02] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - HEAT EXCHANGER
1.28.1/ 1[01] (VAR.109-110) SYNCHRONIZED MECHANICAL REVERSER UNIT - SHAFTS AND GEARS
1.28.1/ 1[02] (VAR.109-110) SYNCHRONIZED MECHANICAL REVERSER UNIT - SHAFTS AND GEARS
1.28.1/ 2[01] (VAR.113-119-119/1) SYNCHRONIZED CREEPER AND REVERSER UNIT - SHAFTS AND GEARS
1.28.1/ 2[02] (VAR.113-119-119/1) SYNCHRONIZED CREEPER AND REVERSER UNIT - SHAFTS AND GEARS
1.28.1/ 2[03] (VAR.113-119-119/1) SYNCHRONIZED CREEPER AND REVERSER UNIT - SHAFTS AND GEARS
1.28.1/ 3[01] (VAR.119/1) SYNCHRONIZED CREEPER AND REVERSER UNIT 200 M/H - SHAFTS AND GEARS
1.28.1/ 4[01] (VAR.273-277) MECHANICAL OVER-DRIVE (40 KM/H) - 4WD - CLUTCH SHAFT & GEARS
1.28.1/ 4[02] (VAR.273-277) MECHANICAL OVER-DRIVE (40 KM/H) - 4WD - DRIVEN SHAFT & COVER
1.28.1[01] TRANSMISSION GEARS - GEARBOX SHAFT, GEARINGS
1.28.1[02] TRANSMISSION GEARS - DRIVEN SHAFT, SYNCHRO
1.28.1[04] TRANSMISSION GEARS - GEARS
1.29.0/ 1[01] (VAR.109-110) SYNCHRONIZED MECHANICAL REVERSER UNIT - CONTROL FORK
1.29.0/ 2[01] (VAR.113-119-119/1) SYNCHRONIZED CREEPER AND REVERSER UNIT - ROD AND FORK
1.29.0/ 3[01] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - ROD AND FORK
1.29.0/ 4[01] (VAR.273-277) MECHANICAL OVER-DRIVE (40 KM/H) - 4WD - CONTROL FORK AND PARTS
1.29.0/ 5[01] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - ROD AND FORK
1.29.0[01] TRANSMISSION INTERNAL SHIFTING CONTROLS - RODS, FORKS
1.29.1[01] TRANSMISSION ESTERNALSHIFTING CONTROLS - LOWER LEVER, ROD
1.32.0[01] CASINGS, COVERS AND SUPPORTS
1.32.1/ 1[01] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H - SLEEVES
1.32.1/ 2[01] (VAR.304/1) FRONT AXLE WITH 2 HYDR. LOCKING CYLINDERS 40 KM/H - REAR BEVEL GEAR PAIR
1.32.1/ 4[01] (VAR.320) HIGH SPEED RING GEAR AND PINION - 4WD - REAR BEVEL GEAR PAIR
1.32.1/ 5[01] (VAR.322) HIGH SPEED RING GEAR AND PINION - 4WD - REAR BEVEL GEAR PAIR
1.32.1/ 6[01] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - REAR BEVEL GEAR
PAIR
1.32.1[01] CENTRAL REDUCTION GEARS - SLOW SPEED DRIVEN GEAR
1.32.1[02] CENTRAL REDUCTION GEARS - MEDIUM SPEED ENGAGING GEAR
1.32.1[03] CENTRAL REDUCTION GEARS - ADJUSTING SHIMS
1.32.2[01] CENTRAL REDUCTION GEARS CONTROLS - RODS & FORKS, RELEVANT PARTS
1.32.4[01] DIFFERENTIAL GEARS - PARTS
1.32.6/ 1[01] (VAR.007) NASO - POWER TAKEOFF - ROD AND FORKS
1.32.6/ 4[01] (VAR.296) (HI-LO) AND SYNCHR. REVERSING GEAR - 30 KM/H WITH DIFF. HYDR.LOCKING - ROD AND FORK
1.32.6/ 6[01] (VAR.727) SYNCHRO MESH GEARED POWER TAKE -OFF 540 RPM - ROD AND FORK
1.32.6/ 7[01] (VAR.729) SYNCHRO MESH GEARED POWER TAKE -OFF 540 - 750 - 1000 RPM - ROD AND FORK
1.32.6[01] DIFFERENTIAL LOCK - RODS & FORKS
1.33.0[01] IDLER CASE & COVERS - 4WD
1.33.1[01] IDLER GEARS - 4WD - GEARS
1.33.1[02] IDLER GEARS - 4WD - PTO SHAFT
1.33.2/ 1[01] (VAR.007) NASO - POWER TAKEOFF - SOLENOID VALVES & SUPPORT
1.33.2/ 4[01] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRON. REVERSING GEAR - 30-40 KM/H - CONTROL VALVE
1.33.2/ 5[01] (VAR.274) (HI-LO) AND SYNCHRONIZED REVERS. GEAR - 40 KM/H HYDR. P.T.O.- (4WD) - SOLENOID VALVE SUPP.
1.33.2/ 6[01] (VAR.274-276) (HI-LO) AND SYNCHRON. REVERSING GEAR - 30-40 KM/H P.T.O. - SOLENOID VALVE SUPP.
1.33.2/ 7[01] (VAR.304-304/1) FRONT AXLE WITH 2 HYDR. LOCKING CYLINDERS 30-40 KM/H - PIPES
1.33.2/ 8[01] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDR. PTO - PIPES & VALVE SUPPORT
Page 4
Figure Search for TL70 TRACTOR (10/98- )
Figure Search for TL70 TRACTOR (10/98- )
1.33.2/ 8[02] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - VALVE SUPPORT
1.33.2/ 8[03] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDR. PTO - FRONT DIFFERENTIAL LOCK PIPES
1.33.2/ 9[01] (VAR.296) (HI-LO) AND SYNCHRONIZED REVERS. GEAR - 30 KM/H WITH DIFFER. HYDR.LOCKI - SOLENOID VALVE
1.33.2/11[01] (VAR.322) HIGH SPEED RING GEAR AND PINION - 4WD - PIPES
1.33.2/12[01] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - PIPES
1.33.2/13[01] (VAR.327-327/1) FRONT DIFFERENTIAL HYDRAULIC LOCKING - PIPES
1.33.2/15[01] (VAR.422) VERSION FOR JAPAN - HYDRAULIC LINES - PIPES
1.33.2/16[01] (VAR.727) SYNCHRO MESH GEARED POWER TAKE -OFF 540 RPM - LEVERS
1.33.2/16[02] (VAR.727) SYNCHRO MESH GEARED POWER TAKE -OFF 540 RPM - VALVE SUPPORT
1.33.2/17[01] (VAR.729) SYNCHRO MESH GEARED POWER TAKE -OFF 540 - 750 - 1000 RPM - CONTROL LEVERS
1.33.2/17[02] (VAR.729) SYNCHRO MESH GEARED POWER TAKE -OFF 540 - 750- 1000 RPM - VALVE SUPPORT
1.33.2[01] IDLER CONTROLS - 4WD - PIPES & SOLENOID VALVES
1.33.2[02] IDLER CONTROLS - 4WD - VALVE SUPPORT & PIPES
1.34.2/ 1[01] (VAR.109-110) SYNCHRONIZED MECHANICAL REVERSER UNIT -LEVER, CROSS-PIECE AND PARTS
1.34.2/ 2[01] (VAR.113-119-119/1) SYNCHRONIZED CREEPER AND REVERSER UNIT - CROSS-PIECE AND PARTS
1.34.2/ 2[02] (VAR.113-119-119/1) SYNCHRONIZED CREEPER AND REVERSER UNIT - CROSS-PIECE AND PARTS
1.34.2/ 3[01] (VAR.271-272-274-276-296) (HI-LO) AND SYNCHRON. REVERSING GEAR - 30-40 KM/H - CROSS-PIECE AND PARTS
1.34.2/ 4[01] (VAR.273-277) MECHANICAL OVER-DRIVE (40 KM/H) - 4WD - CROSS-PIECE AND PARTS
1.38.5/ 1[01] (VAR.053) PROPELLER SHAFT - KOREA - FRONT DRIVE SHAFT
1.38.5/ 2[01] (VAR.449) PADDY FIELD VERSION - 4WD - FRONT DRIVE SHAFT
1.38.5[01] PROPELLER SHAFT - 4WD - GUARD
1.40.0/ 1[01] FRONT AXLE CASING - 4WD - BOX & RELEVANT PARTS
1.40.0/ 2[01] FRONT AXLE - STEERING KNUCKLES-HUBS-4WD
1.40.0/ 4[01] FRONT AXLE - SUPPORT-ROD-4WD
1.40.0/ 5[01] (VAR.304-304/1) FRONT AXLE WITH 2 HYDR. LOCKING CYLINDERS 30-40 KM/H - SLEEVES
1.40.0/ 6[01] FRONT AXLE - BEVEL GEAR PINION SET - 4 WD
1.40.0/ 6[02] FRONT AXLE - BEVEL GEAR/PINION SET - 4WD - ADJUSTING SHIMS
1.40.0/ 6[03] FRONT AXLE - BEVEL GEAR/PINION SET - 4WD - ADJUSTING SHIMS
1.40.0/ 7[01] FRONT AXLE-DIFFERENTIAL - 4WD - PARTS
1.40.0/10[01] FRONT AXLE - DIFFERENTIAL GEARS AND SHAFT - 4WD - HALF-SHAFTS - C4689
1.40.0/10[01A] FRONT AXLE - DIFFERENTIAL GEARS AND SHAFT - 4WD - HALF- SHAFT - D4689
1.40.0/10[02] FRONT AXLE - DIFFERENTIAL GEARS AND SHAFT - 4WD - EPICYCLIC REDUCTION GEAR
1.40.0/102[01] (VAR.304-304/1) FRONT AXLE WITH 2 HYDR. LOCKING CYLINDERS 30-40 KM/H - HALF SHAFTS - C4689
1.40.0/102[02] (VAR.304-304/1) FRONT AXLE WITH 2 HYDR. LOCKING CYLINDERS 30-40 KM/H - HALF SHAFTS - D4689
1.40.0/104[01] (VAR.322) HIGH SPEED RING GEAR AND PINION - 4WD - HALF SHAFT- C4689
1.40.0/104[02] (VAR.322) HIGH SPEED RING GEAR AND PINION - 4WD - HALF SHAFTS - D4689
1.40.0/105[01] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - HALF SHAFTS - C4689
1.40.0/105[02] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - HALF SHAFTS - D4689
1.40.0/105[04] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - BRAKE PARTS
1.40.0/106[01] (VAR.327-327/1) FRONT DIFFERENTIAL HYDRAULIC LOCKING - HALF SHAFTS - C4689
1.40.0/106[02] FRONT DIFFERENTIAL HYDRAULIC LOCKING - HALF SHAFTS - D4689
1.40.0/107[01] (VAR.327/1) ELECTROHYD. FRONT DIFFENTIAL LOCK, BRAKES AND MUDGUARDS - HALF SHAFTS - C4689
1.40.0/107[02] (VAR.327/1) ELECTROHYD. FRONT DIFFENTIAL LOCK, BRAKES AND MUDGUARDS - HALF SHAFTS - D4689
1.40.0/107[04] (VAR.327/1) ELECTROHYD. FRONT DIFFENTIAL LOCK, BRAKES AND MUDGUARDS - BRAKE PARTS
1.40.0/12[01] FRONT AXLE - HYDRAULIC STEERING CYLINDER - 4WD - PARTS
1.40.0/122[01] (VAR.304-304/1) FRONT AXLE WITH 2 HYDR. LOCKING CYLINDERS 30-40 KM/H - POWER STEERING CYLINDERS
1.40.0/124[01] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - CYLINDERS AND
PIPES
Page 5
Figure Search for TL70 TRACTOR (10/98- )
Figure Search for TL70 TRACTOR (10/98- )
1.40.0/126[01] (VAR.422) VERSION FOR JAPAN - POWER STEERING CYLINDER, PARTS
1.40.0/23[01] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - STEERING PIVOT PIN
1.40.0/24[01] (VAR.327/1) ELECTROHYD. FRONT DIFFENTIAL LOCK, BRAKES AND MUDGUARDS - STEERING PIVOT PIN
1.40.0/42[01] (VAR.304-304/1) FRONT AXLE WITH 2 HYDR. LOCKING CYLIND. 30-40 KM/H - STEERING PIVOT PIN AND SUPPORT
1.40.0/44[01] (VAR.322) HIGH SPEED RING GEAR AND PINION - 4WD - BEVEL GEAR PAIR & SUPPORT
1.40.0/44[03] (VAR.322) HIGH SPEED RING GEAR AND PINION - 4WD - SLEEVES AND COVER PLATE
1.40.0/45[01] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - SUPPORT
1.40.0/45[03] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - SLEEVES
1.40.0/46[01] (VAR.327-327/1) FRONT DIFFERENTIAL HYDRAULIC LOCKING - SUPPORT AND SHIMS
1.40.0/46[03] (VAR.327-327/1) FRONT DIFFERENTIAL HYDRAULIC LOCKING - SLEEVES AND COVER PLATE
1.40.0/62[01] (VAR.304/1) FRONT AXLE WITH 2 HYDR. LOCKING CYLINDERS 40 KM/H - BOXES
1.40.0/65[01] (VAR.320) HIGH SPEED RING GEAR AND PINION - 4WD - FRONT BEVEL GEAR PAIR
1.40.0/66[01] (VAR.322) HIGH SPEED RING GEAR AND PINION - 4WD - FRONT BEVEL GEAR PAIR
1.40.0/67[01] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - FRONT BEVEL GEAR
PAIR
1.40.0/72[01] (VAR.304-304/1) FRONT AXLE WITH 2 HYDR. LOCKING CYLINDERS 30-40 KM/H - BOX AND SIDE PINIONS
1.40.0/74[01] (VAR.322) HIGH SPEED RING GEAR AND PINION - 4WD - BOX AND SIDE PINIONS
1.40.0/75[01] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - BOX AND SIDE
PINIONS
1.40.0/76[01] (VAR.327-327/1) FRONT DIFFERENTIAL HYDRAULIC LOCKING - BOX AND SIDE PINIONS
1.41.0/ A[01] FRONT AXLE - 2-WD - POWER STEERING CYLINDER - PARTS
1.41.0/ B[01] FRONT AXLE - 2-WD - TRANSVERSAL STEERING TIE-ROD
1.41.0[01] FRONT AXLE - 2WD - HUBS
1.41.0[02] FRONT AXLE - 2-WD - STEERING ROD & PIPES
1.42.0/ A[01] FRONT AXLE - OIL PUMP - RELEVANT PARTS
1.42.0/ B[01] FRONT AXLE - OIL PUMP - RELEVANT PARTS
1.42.0/ D[01] (VAR.274-276) (HI-LO) AND SYNCHRONIZED REVERSING GEAR - 30-40 KM/H P.T.O. - OIL PUMP AND
COMPONENTS
1.42.0/ 1[01] FRONT AXLE - 4-WD - POWER STEERING HYDRAULIC CONTROL - PIPES & OIL FILTER
1.42.0/ 1[02] FRONT AXLE - 4-WD - POWER STEERING HYDRAULIC CONTROL - PIPES & BRACKETS
1.42.0/ 2[01] (VAR.007) NASO - POWER STEERING TANK & PIPES
1.42.0/ 2[02] (VAR.007) NASO - POWER STEERING FILTER & PIPES
1.42.0/ 5[01] (VAR.296) (HI-LO) AND SYNCHR. REV. GEAR - 30 KM/H WITH DIFF. HYDR.LOCKING - POWER STEERING TANK
1.42.0/ 5[02] (VAR.296) (HI-LO) AND SYNCHR. REV. GEAR - 30 KM/H WITH DIFF. HYDR. LOCKING - FILTER AND PIPES
1.42.0/ 6[01] (VAR.727) SYNCHRO MESH GEARED POWER TAKE -OFF 540 RPM - FILTER AND PIPES
1.42.0/ 7[01] (VAR.729) SYNCHRO MESH GEARED POWER TAKE -OFF 540 - 750 - 1000 RPM - FILTER & PIPES
1.42.0[01] FRONT AXLE - 2-WD - POWER STEERING HYDRAULIC CONTROL - PUMP & PIPESD
1.42.0[02] FRONT AXLE - 2-WD - POWER STEERING HYDRAULIC CONTROL - PIPES & BRAKETS
1.43.0/ 1[01] (VAR.327/1) ELECTROHYD. FRONT DIFFENTIAL LOCK, BRAKES AND MUDGUARDS
1.43.0/ 3[01] (VAR.495) FRONT MUDGUARDS- 4WD - SUPPORTS - ARMS
1.43.0/ 4[01] (VAR.860) FRONT MUDGUARDS - 2WD
1.43.0/ 4[02] (VAR.860) FRONT FENDERS - 2WD
1.43.0[01] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - MUDGUARDS
1.44.0[01] (VAR.225-226-227) FRONT SUPPORT AND BALLAST
1.48.0[01] BOX - SIDE REDUCTION GEAR SPACERS
1.48.1/ 3[01] (VAR.422) VERSION FOR JAPAN - FWD SHAFT - SIDE REDUCTION GEAR BOX, SHAFT
1.48.1/ 4[01] (VAR.449) PADDY FIELD VERSION - SIDE REDUCTION GEAR BOX, SHAFT
1.48.1[01] FINAL DRIVE, GEARS AND SHAFTS
Page 6
Figure Search for TL70 TRACTOR (10/98- )
Figure Search for TL70 TRACTOR (10/98- )
1.48.1[02] FINAL DRIVE, GEARS AND SHAFTS
1.48.2[01] (VAR. 465-470-471) REAR BALLAST
1.65.3[01] TRANSMISSION BRAKE - PARTS
1.65.5/ 1[01] PARKING BRAKE - 4WD
1.65.5[01] PARKING BRAKE - 2WD
1.65.5[02] PARKING BRAKE - 2WD
1.67.2[01] HANDBRAKE CONTROL
1.68.5/ 1[01] BRAKE PIPING
1.68.5/ 2[01] (VAR.007) NASO - BRAKE PIPES
1.68.5/ 4[01] (VAR.296) (HI-LO) AND SYNCHR. REV. GEAR - 30 KM/H WITH DIFF. HYDR.LOCKING - BRAKE PIPES
1.68.5/ 5[01] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - BRAKE PIPES
1.68.5/ 5[03] (VAR.325) ELECTROHYD. FRONT DIFFENTIAL LOCK 40 KM/H, BRAKES AND MUDGUARDS - BRAKE PIPES
1.68.5/ 6[01] (VAR.327/1) ELECTROHYD. FRONT DIFFENTIAL LOCK, BRAKES AND MUDGUARDS - BRAKE PIPES
1.68.5/ 6[03] (VAR.327/1) ELECTROHYD. FRONT DIFFENTIAL LOCK, BRAKES AND MUDGUARDS - BRAKE PIPES
1.68.5/ 8[01] (VAR.727) SYNCHRO MESH GEARED POWER TAKE -OFF 540 RPM - BRAKES PIPES
1.68.5/ 9[01] (VAR.729) SYNCHRO MESH GEARED POWER TAKE -OFF 540 - 750 - 1000 RPM - BRAKE PIPES
1.68.5[01] BRAKE PIPING - 2 WD
1.74.1[01] BATTERY MOUNTING - BATTERY
1.74.3/ 1[01] (VAR.007) NASO - BATTERY FASTENING
1.74.3/ 4[01] (VAR.710) VERSION FOR OVERSIZED BATTERY - SUPPORTS - BOX AND LADDER
1.74.3/ 5[01] (VAR.712) NASO - BATTERY FASTENING
1.75.0/ 1[01] (VAR.007) NASO - ELECTRIC PARTS
1.75.0/ 2[01] (VAR.727) SYNCHRO MESH GEARED POWER TAKE -OFF 540 RPM - ELECTRIC COMPONENTS
1.75.0/ 3[01] (VAR.729) SYNCHRO MESH GEARED POWER TAKE -OFF 540 - 750 - 1000 RPM - ELECTRIC PARTS
1.75.0/ 4[01] (VAR.745-746) DIGITAL INSTRUMENT CLUSTER (WITH CAB) - ELECTRIC CABLES - SENSORS
1.75.0/ 5[01] (VAR.746/1) DIGITAL UNIT FOR HYDR. P.T.O. (POWER-SHUTTLE)
1.75.0[01] PTO ELECTRIC CONTROLS - LIGHT SWITCH
1.75.1/1[01] (VAR.007) NASO - REAR ELECTRIC PARTS
1.75.1/4[01] (VAR. 743-749-753) RADAR
1.75.1[01] OUTLET, CONTROL PANEL AND STEERING COLUMN COVER
1.75.1[02] HORN & AUXILIARY POWER SOCKETS
1.75.3[01] BATTERY CABLES
1.75.4/ A[01] FUSE BOX
1.75.4/ 1[01] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - ELECTRIC CABLES
1.75.4/ 2[01] (VAR.372) TRAILER BRAKE VALVE (ITALY) - SOLENOID VALVE
1.75.4[01] VARIOUS ELECTRIC CABLES-C4547 S/N 1188704
1.75.4[02] VARIOUS ELECTRIC CABLES-C4547 S/N 1188704
1.75.4[03] VARIOUS ELECTRIC CABLES-D4547 S/N 1188705
1.75.4[04] VARIOUS ELECTRIC CABLES-D4547 S/N 1188705
1.75.6[01] LIGHTING COMPONENTS
1.75.6[02] LIGHTING COMPONENTS - (W/O CAB)
1.75.6[03] LIGHTING COMPONENTS - (W/O CAB)
1.77.0[01] CONNECTOR, CABLE TERMINAL
1.77.0[02] CONNECTOR, CABLE TERMINAL
1.77.0[03] CONNECTOR, CABLE TERMINAL
1.77.0[04] CONNECTOR, CABLE TERMINAL
1.77.0[05] CONNECTOR, CABLE TERMINAL
1.77.0[06] CONNECTOR, CABLE TERMINAL
Page 7
Figure Search for TL70 TRACTOR (10/98- )
Figure Search for TL70 TRACTOR (10/98- )
1.77.0[07] CONNECTOR, CABLE TERMINAL
1.77.0[08] CONNECTOR, CABLE TERMINAL
1.77.0[09] CONNECTOR, CABLE TERMINAL
1.77.0[10] CONNECTOR, CABLE TERMINAL
1.80.1/ 1[01] (VAR.007) NASO - POWER TAKEOFF - COVER & GUARD
1.80.1/ 1[02] (VAR.007) NASO - POWER TAKEOFF, SHAFTS AND GEARS
1.80.1/ 4[01] (VAR.275-279) POWER SHUTTLE - HI-LO - 30-40 KM\H - HYDRAULIC PTO - MANIFOLD & UNIONS
1.80.1/ 5[01] (VAR.727) SYNCHRO MESH GEARED POWER TAKE -OFF 540 RPM - BOX AND COVER
1.80.1/ 5[02] (VAR.727) SYNCHRO MESH GEARED POWER TAKE -OFF 540 RPM - SHAFTS
1.80.1/ 6[01] (VAR.728) SYNCHRO MESH GEARED POWER TAKE-OFF 540 RPM - 1000 RPM (NASO) - SHAFTS AND GEARS
1.80.1/ 6[02] (VAR.728) SYNCHRO MESH GEARED POWER TAKE -OFF 540 RPM - 1000 RPM (NASO) - ROD AND FORK
1.80.1/ 7[01] (VAR.729) SYNCHRO MESH GEARED POWER TAKE -OFF 540 - 750 - 1000 RPM - BOX AND COVER
1.80.1/ 7[02] (VAR.729) SYNCHRO MESH GEARED POWER TAKE -OFF 540- 750 - 1000 RPM - GEAR SHAFTS
1.80.1/ 9[01] (VAR.791-793) PTO WITH 6 AND 21 GROOVES
1.80.1/10[01] (VAR. 810-837-849) PTO GUARD
1.80.1/11[01] (VAR.817) POWER TAKE-OFF - 540-750-1000 RPM - COVER AND SHAFT
1.80.1/11[02] (VAR.817) POWER TAKE-OFF 540-750-1000 R/M - SHAFT, GEARS, FORK
1.80.1/12[01] (VAR.818) POWER TAKE OFF - 540-750 RPM - SHAFTS AND COVER
1.80.1/12[02] (VAR.818) POWER TAKE OFF - 540-750 RPM - DRIVEN GEARS AND FORK
1.80.1[01] POWER TAKEOFF - COVER & GUARD
1.80.1[02] POWER TAKEOFF - SHAFTS & GEARS
1.80.6/ 1[01] (VAR.007) NASO - POWER TAKEOFF - PIPES
1.80.6/ 1[02] (VAR.007) NASO - POWER TAKEOFF - PIPES, UNIONS & VALVE
1.80.6/ 3[01] (VAR.727) SYNCHRO MESH GEARED POWER TAKE -OFF 540 RPM - BRACKETS - PIPES
1.80.6/ 3[02] (VAR.727) SYNCHRO MESH GEARED POWER TAKE -OFF 540 RPM - PIPES
1.80.6/ 4[01] (VAR.729) SYNCHRO MESH GEARED POWER TAKE -OFF540 - 750 - 1000 RPM - PIPES
1.80.7/ 1[01] (VAR.007) NASO - POWER TAKEOFF - CLUTCH
1.80.7/ 3[01] (VAR.727) SYNCHRO MESH GEARED POWER TAKE -OFF 540 RPM - CLUTCH DISKS
1.80.7/ 4[01] (VAR.729) SYNCHRO MESH GEARED POWER TAKE -OFF 540 - 750 - 1000 RPM - CLUTCH DISKS
1.82.0/ 1[01] (VAR.832-836) ELECTRONIC LIFTING - PARTS
1.82.0/ 1[02] (VAR.832-836) ELECTRONIC LIFTING - CYLINDER PRESSURE LIMITING VALVE
1.82.0/ 1[03] (VAR.832-836) ELECTRONIC LIFTING - PIPES, ARMS
1.82.0/ 1[04] (VAR.832-836) ELECTRONIC LIFTING - VALVES & PARTS
1.82.0[01] LIFT - COVERS
1.82.1/ 2[01] (VAR.782-783) AUXILIARY JACK - ARM, BRACKET, PIPES
1.82.1/ 2A[01] (VAR.782) ADDITIONAL JACK - PARTS
1.82.1/ 3[01] (VAR.784-785-786) ADDITIONAL JACK - PIPES - UNIONS - SUPPORTS
1.82.1[01] LIFT - FILTER & PIPES
1.82.1[02] LIFT - PIPES & PARTS
1.82.1[03] LIFT - PIPES & PARTS
1.82.2[01] LIFT EXTERNAL CONTROLS - LEVERS & SUPPORT (WITHOUT CAB)
1.82.2[02] LIFT EXTERNAL CONTROLS - TIE-RODS (WITHOUT CAB)
1.82.2[03] LIFT EXTERNAL CONTROLS - LEVERS & SUPPORT (WITHOUT CAB)
1.82.3/ 1[01] (VAR.823-841) OVERSIZED PUMP - PARTS
1.82.3[01] HYDRAULIC PUMP - PARTS
1.82.4[01] LIFT CONTROL VALVE - VALVES & PARTS
1.82.4[02] LIFT CONTROL VALVE - VALVES & PARTS
1.82.4[03] LIFT CONTROL VALVE - VALVES & PARTS
Page 8
You're Reading a Preview
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$52.99
$68.99
NEW HOLLand TL70 Tractor MASTER ILLUSTRATED Parts LIST Manual BOOK
Viewed 43 Times Today
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$52.99
$68.99
Secure transaction
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
This is a comprehensive illustrated master parts list manual for the New Holland model TL70 Ag Tractor. It contains detailed parts explosions, exploded views, and breakdowns of all part numbers for various aspects of these TL70 New Holland ag tractors, including detailed engine parts breakdowns.
The manual covers the following areas of the machine:
- General
- Engine
- Engine Equipment
- Transmission
- Front Axle and Steering
- Rear Axle
- Electrical System
- Hydraulic System
- Sheet Metal
- Implement Lift
- Operators Platform and Cab
- Wheels Tracks
- Decals
This indexed manual is divided into sections for fast navigation, including a full machine text index, figure search instructions, and general information such as abbreviations and metric to inches conversion.
Additionally, it includes attachment parts manuals for TB, TL, TN, and TS series compact tractors, such as:
- 32LA FARM LOADER
- 33LA FARM LOADER
- 46LB AG LOADER
- 52LA FARM LOADER
- 7310 QUICK ATTACH FARM LOADER
- 7210 QUICK ATTACH FARM LOADER
- 7312 QUICK ATTACH FARM LOADER
- 7314 QUICK ATTACH FARM LOADER
- 7511 FARM LOADER
For DIY tractor parts lookup, this manual is essential for understanding how everything fits together. The exploded views will assist in servicing, rebuilding, teardowns, overhauls, repairs, and adjustments. It provides easy-to-read exploded views for accurate part number identification, ordering, and repairs, containing all the original parts information needed to lookup correct part numbers for the entire machine, including engine parts.
This manual is identical to the original manual made for these New Holland model TL70 ag tractors, with the only difference being that it is not in paper form and does not require shipping. There's no waiting for a paper book or CD to arrive in the mail. It can be accessed immediately, allowing for easy viewing, printing, and saving to a computer for future use. All sections are fully text searchable for quick and simple navigation.
About New Holland:
New Holland is a global leader in the design and manufacture of a full line of agricultural tractors and construction equipment, including wheel loaders, excavators, skid steer loaders, backhoe diggers, graders, dump truck haulers, and mini compact excavators. Supported by over 700 dealers with more than 1600 outlets in over 100 countries, New Holland brings together the knowledge and experience of its heritage brands.
Founded in 1895, New Holland started with one corn mill in Pennsylvania and later expanded into farm implements, finding success with automatic hay balers. Acquired by Ford Tractor Operations in 1985, the Ford New Holland name began to appear on tractors. In 1999, Case IH and FIAT New Holland merged to form CNH Global (Case New Holland), which continues to build tractors under the New Holland brand.
New Holland produces both agricultural farm equipment and heavy construction equipment, including backhoes, skid steer loaders, excavators, mini excavators, and wheel loaders. The models included in this Illustrated Master Parts List Manual are the TL70 Ag Tractor.
