Deutz Fahr Agrofarm 410 / 420 / 430 Tractor Service & Repair Manual
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
WORKSHOP MANUAL
AGROFARM 410 -> 16001
AGROFARM 410 -> 20001
AGROFARM 420 -> 16001
AGROFARM 420 -> 20001
AGROFARM 430 -> 1001
AGROFARM 430 -> 5001
307.W.0270.en.6.01-AGROFARM 410 1 1 307.W.0270.en.6.01-AGROFARM 410 1 1 7/8/2010 9:06:29 PM 7/8/2010 9:06:29 PM
307.W.0270.en.6.01-AGROFARM 410 2 2 307.W.0270.en.6.01-AGROFARM 410 2 2 7/8/2010 9:06:31 PM 7/8/2010 9:06:31 PM
TABLE OF CONTENTS
I
0 - INTRODUCTION
0.1 - Introduction (AGROFARM 430 -> 1001) 0-2
0.1.1 - Safety notes 0-3
0.1.2 - General safety rules 0-4
0.1.3 - Safety precautions for removal and refitting operations 0-6
0.1.4 - Lifting instructions 0-8
0.1.5 - Tightening torques 0-10
0.1.6 - Threadlockers, adhesives, sealants and lubricants 0-14
0.1.7 - Conversion factors 0-16
10 - TECHNICAL CHARACTERISTICS
10.1 - Engine 10-2
10.1.1 - Technical data (AGROFARM 430 -> 1001) 10-2
10.1.2 - Engine 2012 components (AGROFARM 430 -> 1001) 10-7
10.2 - Transmission 10-12
10.2.1 - Transmission (AGROFARM 430 -> 1001) 10-12
10.2.2 - Rear PTO (AGROFARM 430 -> 1001) 10-25
10.2.3 - 2 and 4-speed PTO and Syncro PTO (AGROFARM 430 -> 1001) 10-29
10.3 - Front axle 10-34
10.3.1 - Front axle (AGROFARM 430 -> 1001) 10-34
10.4 - Hydraulic system 10-39
10.4.1 - Hydraulic system (AGROFARM 430 -> 1001) 10-39
10.4.2 - Steering circuit pump - lift circuit (AGROFARM 430 -> 1001) 10-53
10.4.3 - Power steering valve (AGROFARM 430 -> 1001) 10-55
10.4.4 - Remote control valve - 6-way version (AGROFARM 430 -> 1001) 10-56
10.4.5 - Hydraulic lift control valve (AGROFARM 430 -> 1001) 10-57
10.4.6 - Braking system (AGROFARM 430 -> 1001) 10-65
10.4.7 - Trailer braking valve (AGROFARM 430 -> 1001) 10-67
10.4.8 - Park Brake system (AGROFARM 430 -> 1001) 10-71
10.4.9 - Park Brake valve (AGROFARM 430 -> 1001) 10-76
10.4.10 - Services solenoid valves assembly - Pressure holding valves (AGROFARM 430 ->
1001) 10-77
10.4.11 - Shuttle solenoid valves assembly (AGROFARM 430 -> 1001) 10-80
20 - CALIBRATIONS AND ELECTRONIC DIAGNOSIS
20.1 - Diagnostic instrument 20-2
20.1.1 - All Round Tester (ART®) (AGROFARM 430 -> 1001) 20-2
20.1.2 - Connecting the tester to the tractor (AGROFARM 430 -> 1001) 20-7
20.1.3 - All-Round Tester Manual - Introduction (AGROFARM 430 -> 1001) 20-8
20.1.4 - All-Round Tester Manual - Monitor Menu (AGROFARM 430 -> 1001) 20-10
20.1.5 - All-Round Tester Manual - Parameters Menu (AGROFARM 430 -> 1001) 20-15
20.1.6 - All-Round Tester Manual - Calibrations Menu (AGROFARM 430 -> 1001) 20-17
20.1.7 - All-Round Tester Manual - Alarms Menu (AGROFARM 430 -> 1001) 20-23
20.1.8 - All-Round Tester Manual - Test Menu (AGROFARM 430 -> 1001) 20-27
20.1.9 - All-Round Tester Manual - Engine Menu (AGROFARM 430 -> 1001) 20-28
307.W.0270.en.6.01-AGROFARM 410 I I 307.W.0270.en.6.01-AGROFARM 410 I I 7/8/2010 9:06:31 PM 7/8/2010 9:06:31 PM
TABLE OF CONTENTS
II
20.2 - Introduction to the tractor’s electronic system 20-34
20.2.1 - Electronic system (AGROFARM 430 -> 1001) 20-34
20.2.2 - CANBUS System (AGROFARM 430 -> 1001) 20-35
20.2.3 - Engine ECU (AGROFARM 430 -> 1001) 20-37
20.2.4 - Shuttle ECU (AGROFARM 430 -> 1001) 20-39
20.3 - Putting the tractor into service 20-41
20.3.1 - Introduction to commissioning the tractor (AGROFARM 430 -> 1001) 20-41
20.3.2 - Renewal of the instrument panel - Introduction (AGROFARM 430 -> 1001) 20-42
20.3.3 - Renewal of the instrument panel - Setting the tractor type (AGROFARM 430 -> 1001) 20-43
20.3.4 - Renewal of the instrument panel - Setting the wheels constant (AGROFARM 430 ->
1001) 20-45
20.3.5 - Renewal of the instrument panel - Setting the speed units of measurement (AGROFARM
430 -> 1001) 20-48
20.3.6 - Renewal of the shuttle ECU - Introduction (AGROFARM 430 -> 1001) 20-50
20.3.7 - Renewal of the shuttle ECU - Initialisation of the ECU (AGROFARM 430 -> 1001) 20-51
20.3.8 - Renewal of the shuttle ECU - Line end programming (AGROFARM 430 -> 1001) 20-54
20.3.9 - Renewal of the shuttle ECU - Notes on the clutch calibration procedure (AGROFARM
430 -> 1001) 20-62
20.3.10 - Renewal of the shuttle ECU - Automatic calibration of the shuttle clutches (AGROFARM
430 -> 1001) 20-63
20.3.11 - Renewal of the shuttle control unit - Manual calibration of the shuttle clutches
(AGROFARM 430 -> 1001) 20-66
20.3.12 - Renewal of the shuttle ECU - Editing the comfort parameters (AGROFARM 430 ->
1001) 20-72
20.3.13 - Renewal of the shuttle ECU - Calibration of the clutch pedal (AGROFARM 430 -> 1001)
20-74
20.3.14 - Renewal of the engine ECU - Introduction (AGROFARM 430 -> 1001) 20-77
20.3.15 - Renewal of the engine control unit - Reading and saving DATASET (AGROFARM 430
-> 1001) 20-78
20.3.16 - Renewal of the engine control unit - Programming the control unit with DATASET
(AGROFARM 430 -> 1001) 20-79
20.3.17 - Renewal of the engine ECU - Calibration of the accelerator pedal (AGROFARM 430 ->
1001) 20-81
20.3.18 - Renewal of the engine ECU - Calibration of the hand throttle lever (AGROFARM 430 ->
1001) 20-83
20.4 - ECU alarms 20-85
20.4.1 - List of control unit alarms (AGROFARM 430 -> 1001) 20-85
20.4.2 - Engine alarms 20-88
20.4.3 - Hydraulic shuttle alarms 20-108
20.4.4 - Instrument panel alarms 20-140
20.4.5 - Transmission alarms 20-141
30 - METHOD OF INTERVENTION
30.1 - B0 - Engine 30-2
30.1.1 - Engine - Separation from the transmission (B0.00.02) (AGROFARM 430 -> 1001) 30-2
30.1.2 - Engine (B0.00.01) (AGROFARM 430 -> 1001) 30-9
307.W.0270.en.6.01-AGROFARM 410 II II 307.W.0270.en.6.01-AGROFARM 410 II II 7/8/2010 9:06:31 PM 7/8/2010 9:06:31 PM
TABLE OF CONTENTS
III
30.1.3 - Air conditioning compressor drive belt (B0.02.04) (AGROFARM 430 -> 1001) 30-17
30.1.4 - Tension adjustment of the fan and air conditioning compressor drive belt (AGROFARM
430 -> 1001) 30-18
30.1.5 - Alternator, fuel pump and water pump drive belt (AGROFARM 430 -> 1001) 30-19
30.1.6 - Tension adjustment of the alternator, fuel pump and water pump drive belt (AGROFARM
430 -> 1001) 30-20
30.1.7 - Checking the compression pressure (AGROFARM 430 -> 1001) 30-21
30.1.8 - Removing and installing the crankcase bleeding (AGROFARM 430 -> 1001) 30-24
30.1.9 - Installing and removing turning gear (AGROFARM 430 -> 1001) 30-26
30.1.10 - Removing and installing the flywheel (AGROFARM 430 -> 1001) 30-28
30.1.11 - Checking piston overhang (AGROFARM 430 -> 1001) 30-30
30.1.12 - Checking and setting the valve clearance (AGROFARM 430 -> 1001) 30-33
30.1.13 - Removing and installing the rocker arm and rocker arm bracket (AGROFARM 430 ->
1001) 30-37
30.1.14 - Disassembling, assembling and checking the rocker arm and rocker arm bracket
(AGROFARM 430 -> 1001) 30-41
30.1.15 - Removing and installing the cylinder head (AGROFARM 430 -> 1001) 30-45
30.1.16 - Removing and installing the air bearing (AGROFARM 430 -> 1001) 30-53
30.1.17 - Removing and installing the fuel injectors (AGROFARM 430 -> 1001) 30-56
30.1.18 - Removing and installing the engine shutdown (AGROFARM 430 -> 1001) 30-60
30.1.19 - Removing and installing the coolant pump (AGROFARM 430 -> 1001) 30-63
30.1.20 - Checking the coolant thermostat (AGROFARM 430 -> 1001) 30-66
30.1.21 - Removing and installing the V-belt pulley (AGROFARM 430 -> 1001) 30-68
30.1.22 - Removing and installing the charge air line (AGROFARM 430 -> 1001) 30-71
30.1.23 - Removing and installing the exhaust line (AGROFARM 430 -> 1001) 30-75
30.1.24 - Removing and installing the turbocharger (AGROFARM 430 -> 1001) 30-78
30.2 - C0 - Engine accessories 30-83
30.2.1 - Radiator (C0.01.03) (AGROFARM 430 -> 1001) 30-83
30.2.2 - Air cleaner (C0.02.01) (AGROFARM 430 -> 1001) 30-88
30.2.3 - Intercooler (C0.02.02) (AGROFARM 430 -> 1001) 30-89
30.2.4 - Fuel tank (C0.03.01) (AGROFARM 430 -> 1001) 30-91
30.2.5 - Fuel cooler (AGROFARM 430 -> 1001) 30-94
30.2.6 - Starter motor (AGROFARM 430 -> 1001) 30-96
30.2.7 - Exhaust pipe - Tractor with cab (C0.06.02) (AGROFARM 430 -> 1001) 30-98
30.2.8 - Silencer (C0.06.01) (AGROFARM 430 -> 1001) 30-99
30.2.9 - Remove and install fuel filter console (AGROFARM 430 -> 1001) 30-100
30.2.10 - Removing and installing the fuel supply pump (AGROFARM 430 -> 1001) 30-103
30.2.11 - Remove and install the heating flange (AGROFARM 430 -> 1001) 30-106
30.2.12 - Removing and installing the thermostat (AGROFARM 430 -> 1001) 30-108
30.2.13 - Removing and installing temperature transmitter (AGROFARM 430 -> 1001) 30-110
30.2.14 - Removing and installing the generator (operating side) (AGROFARM 430 -> 1001) 30-112
30.2.15 - Removing and installing the oil pressure switch (AGROFARM 430 -> 1001) 30-117
30.3 - D0 - Transmission 30-119
30.3.1 - Changing the transmission oil (D0.00.01) (AGROFARM 430 -> 1001) 30-119
30.3.2 - Range selector assembly (AGROFARM 430 -> 1001) 30-121
30.3.3 - Disassembly of the range selector (AGROFARM 430 -> 1001) 30-122
307.W.0270.en.6.01-AGROFARM 410 III III 307.W.0270.en.6.01-AGROFARM 410 III III 7/8/2010 9:06:31 PM 7/8/2010 9:06:31 PM
TABLE OF CONTENTS
IV
30.3.4 - Separation of housing from transmission (D0.02.01) (AGROFARM 430 -> 1001) 30-124
30.3.5 - Shuttle assembly - complete unit (D0.03.01) (AGROFARM 430 -> 1001) 30-129
30.3.6 - Disassembly of the shuttle unit (AGROFARM 430 -> 1001) 30-132
30.3.7 - Disassembly of the cover unit (AGROFARM 430 -> 1001) 30-136
30.3.8 - Disassembly of the forward drive clutch assembly (AGROFARM 430 -> 1001) 30-138
30.3.9 - Disassembly of the reverse drive clutch assembly (AGROFARM 430 -> 1001) 30-143
30.3.10 - Gearbox and Hi-Lo assembly (AGROFARM 430 -> 1001) 30-150
30.3.11 - Disassembly of the Hi-Lo unit (D0.04.01) (AGROFARM 430 -> 1001) 30-153
30.3.12 - Disassembly of the planet carrier (AGROFARM 430 -> 1001) 30-160
30.3.13 - Disassembly of the Hi range clutch housing (AGROFARM 430 -> 1001) 30-162
30.3.14 - Hi-Lo unit output shaft disassembly procedure (AGROFARM 430 -> 1001) 30-174
30.3.15 - Disassembly of the gearbox input shaft (AGROFARM 430 -> 1001) 30-176
30.3.16 - Torsional spring plate (AGROFARM 430 -> 1001) 30-179
30.3.17 - Disassembly of the primary shaft - Version with Hi-Lo (AGROFARM 430 -> 1001) 30-180
30.3.18 - Secondary shaft - Version with Hi-Lo (AGROFARM 430 -> 1001) 30-182
30.3.19 - Disassembly of the secondary shaft - Version with Hi-Lo (AGROFARM 430 -> 1001) 30-187
30.3.20 - Range gearbox and differential assembly - complete assembly (AGROFARM 430 ->
1001) 30-192
30.3.21 - Complete gearbox assembly - Version with Hi-Lo (D0.09.04) (AGROFARM 430 ->
1001) 30-193
30.3.22 - Adjustment of the differential - Bevel gear pair (AGROFARM 430 -> 1001) 30-195
30.3.23 - Disassembly of the rear pinion (D0.11.01) (AGROFARM 430 -> 1001) 30-206
30.3.24 - Disassembly of the 4WD output shaft (AGROFARM 430 -> 1001) 30-211
30.3.25 - PTO clutch. (D0.12.02) (AGROFARM 430 -> 1001) 30-214
30.3.26 - Disassembly of the PTO clutch (AGROFARM 430 -> 1001) 30-219
30.3.27 - Pump drive PTO - Outer gear (AGROFARM 430 -> 1001) 30-225
30.3.28 - Pump drive PTO - Inner gear (AGROFARM 430 -> 1001) 30-228
30.3.29 - PTO output shaft - 4 speed version (D0.14.01) (AGROFARM 430 -> 1001) 30-231
30.3.30 - Disassembly of the PTO output shaft - 4 speed version (AGROFARM 430 -> 1001) 30-235
30.3.31 - Disassembly of the Groundspeed PTO output shaft (AGROFARM 430 -> 1001) 30-240
30.3.32 - Disassembly of the Groundspeed PTO engagement device (AGROFARM 430 -> 1001)
30-243
30.3.33 - Disassembly of the 4WD engagement device - Easyshift (AGROFARM 430 -> 1001) 30-244
30.4 - E0 - Rear axle 30-248
30.4.1 - Right-hand rear axle (E0.02.01) (AGROFARM 430 -> 1001) 30-248
30.4.2 - Disassembly of LH/RH rear axle (AGROFARM 430 -> 1001) 30-251
30.4.3 - Left-hand rear axle (E0.02.02) (AGROFARM 430 -> 1001) 30-257
30.4.4 - Disassembly of the planet carrier (AGROFARM 430 -> 1001) 30-258
30.4.5 - Rear differential (E0.02.07) (AGROFARM 430 -> 1001) 30-260
30.4.6 - Disassembly of the rear differential (AGROFARM 430 -> 1001) 30-264
30.4.7 - Park Brake assembly (E0.03.03) (AGROFARM 430 -> 1001) 30-267
30.4.8 - Park Brake unit disassembly (AGROFARM 430 -> 1001) 30-270
30.5 - F0 - Front axle 30-274
30.5.1 - Separation of front support from engine (F0.01.01) (AGROFARM 430 -> 1001) 30-274
30.5.2 - Front support (AGROFARM 430 -> 1001) 30-278
30.5.3 - 4WD front axle (F0.03.01) (AGROFARM 430 -> 1001) 30-282
307.W.0270.en.6.01-AGROFARM 410 IV IV 307.W.0270.en.6.01-AGROFARM 410 IV IV 7/8/2010 9:06:31 PM 7/8/2010 9:06:31 PM
TABLE OF CONTENTS
V
30.5.4 - Adjusting the front axle end float (AGROFARM 430 -> 1001) 30-284
30.5.5 - Steering cylinders (AGROFARM 430 -> 1001) 30-287
30.5.6 - Steering cylinders disassembly (AGROFARM 430 -> 1001) 30-289
30.5.7 - Steering knuckle housing and half-shaft (AGROFARM 430 -> 1001) 30-293
30.5.8 - Adjustment of steering knuckle housing and axle shaft (AGROFARM 430 -> 1001) 30-301
30.5.9 - Differential unit (AGROFARM 430 -> 1001) 30-304
30.5.10 - Differential disassembly (AGROFARM 430 -> 1001) 30-306
30.5.11 - Differential unit adjustment (AGROFARM 430 -> 1001) 30-309
30.5.12 - Bevel gear pair (AGROFARM 430 -> 1001) 30-313
30.5.13 - Adjustment of the bevel gear pair (AGROFARM 430 -> 1001) 30-318
30.5.14 - Disassembly of the differential (AGROFARM 430 -> 1001) 30-328
30.5.15 - 4WD shaft (F0.04.01) (AGROFARM 430 -> 1001) 30-331
30.5.16 - Planetary reduction gear (F0.06.01) (AGROFARM 430 -> 1001) 30-334
30.5.17 - Disassembly of the planetary reduction gear (AGROFARM 430 -> 1001) 30-336
30.5.18 - Front brake discs (AGROFARM 430 -> 1001) 30-342
30.5.19 - Front axle brake piston (AGROFARM 430 -> 1001) 30-343
30.6 - G0 - Bodywork - Cab - Platform 30-344
30.6.1 - Cab (G0.03.01) (AGROFARM 430 -> 1001) 30-344
30.6.2 - Front hood and side panels (G0.01.01) (AGROFARM 430 -> 1001) 30-352
30.6.3 - Battery support (G0.01.04) (AGROFARM 430 -> 1001) 30-354
30.6.4 - Cab access steps (G0.03.03) (AGROFARM 430 -> 1001) 30-356
30.6.5 - Fenders (G0.04.01) (AGROFARM 430 -> 1001) 30-357
30.6.6 - Right-hand console (G0.06.01) (AGROFARM 430 -> 1001) 30-358
30.6.7 - Left-hand console (G0.06.02) (AGROFARM 430 -> 1001) 30-360
30.6.8 - Front instrument panel (G0.06.04) (AGROFARM 430 -> 1001) 30-362
30.6.9 - Roof lining - Version with high visibility cab (G0.06.07) (AGROFARM 430 -> 1001) 30-366
30.6.10 - Heating fan - Version with high visibility cab (AGROFARM 430 -> 1001) 30-368
30.6.11 - Air conditioning system controls - High-visibility roof system (G0.09.01) (AGROFARM
430 -> 1001) 30-370
30.6.12 - Air conditioning system - Standard roof version (AGROFARM 430 -> 1001) 30-373
30.6.13 - Heating and air conditioning unit - Version with high visibility cab (G0.09.03)
(AGROFARM 430 -> 1001) 30-376
30.6.14 - Heating control cable (AGROFARM 430 -> 1001) 30-378
30.6.15 - Condenser - Version with high-visibility roof (AGROFARM 430 -> 1001) 30-380
30.6.16 - Receiver drier - Version with high visibility roof (AGROFARM 430 -> 1001) 30-382
30.6.17 - Conditioner evaporator - Version with standard roof (AGROFARM 430 -> 1001) 30-383
30.6.18 - Air-conditioning evaporator - Version with high-visibility roof (AGROFARM 430 -> 1001)
30-384
30.6.19 - Heating valve - Version with high visibility cab (AGROFARM 430 -> 1001) 30-385
30.6.20 - Heater matrix - Version with high-visibility roof (AGROFARM 430 -> 1001) 30-386
30.6.21 - Heating radiator - Version with standard roof (AGROFARM 430 -> 1001) 30-387
30.6.22 - Heating and air conditioning unit fan - Version with standard roof (AGROFARM 430 ->
1001) 30-389
30.6.23 - Expansion valve - Version with high visibility roof (AGROFARM 430 -> 1001) 30-391
30.6.24 - Expansion valve - Version with standard roof (AGROFARM 430 -> 1001) 30-393
30.6.25 - Antifreeze sensor - Version with high visibility roof (AGROFARM 430 -> 1001) 30-394
307.W.0270.en.6.01-AGROFARM 410 V V 307.W.0270.en.6.01-AGROFARM 410 V V 7/8/2010 9:06:32 PM 7/8/2010 9:06:32 PM
TABLE OF CONTENTS
VI
30.6.26 - Condenser cooling fans - Version with high-visibility roof (AGROFARM 430 -> 1001) 30-396
30.6.27 - Condenser fan control pressure switch - Version with high visibility roof (AGROFARM
430 -> 1001) 30-397
30.6.28 - Air conditioning temperature control thermostat - Version with standard roof
(AGROFARM 430 -> 1001) 30-398
30.6.29 - Remote valve control cables (AGROFARM 430 -> 1001) 30-399
30.6.30 - Adjustment of the control levers (AGROFARM 430 -> 1001) 30-400
30.7 - H0 - Hydraulic system 30-405
30.7.1 - Pump for hydraulic lift and auxiliary services (AGROFARM 430 -> 1001) 30-405
30.7.2 - Power steering valve (H0.02.01) (AGROFARM 430 -> 1001) 30-407
30.7.3 - Power steering disassembly (AGROFARM 430 -> 1001) 30-409
30.7.4 - Pressure relief valve setting (AGROFARM 430 -> 1001) 30-424
30.7.5 - Power steering pump (AGROFARM 430 -> 1001) 30-425
30.7.6 - Gearbox oil cooler (AGROFARM 430 -> 1001) 30-427
30.7.7 - Rear remote control valve (H0.07.01) (AGROFARM 430 -> 1001) 30-429
30.7.8 - Bleeding the braking circuit (E0.03.01) (AGROFARM 430 -> 1001) 30-432
30.7.9 - Parking brake control valve (AGROFARM 430 -> 1001) 30-434
30.7.10 - Braking distributor valve (AGROFARM 430 -> 1001) 30-436
30.7.11 - Services solenoid valve assembly (H0.10.01) (AGROFARM 430 -> 1001) 30-438
30.7.12 - Pressure reduction and holding valve disassembly (AGROFARM 430 -> 1001) 30-441
30.7.13 - Shuttle solenoid valves assembly (AGROFARM 430 -> 1001) 30-443
30.8 - L0 - Electrical system 30-445
30.8.1 - Lateral battery (AGROFARM 430 -> 1001) 30-445
30.8.2 - Alternator (AGROFARM 430 -> 1001) 30-447
30.8.3 - Clutch pedal potentiometer (AGROFARM 430 -> 1001) 30-449
30.8.4 - Shuttle output speed sensor (AGROFARM 430 -> 1001) 30-451
30.8.5 - Accelerator pedal position sensor (AGROFARM 430 -> 1001) 30-453
30.8.6 - Hand throttle position sensor (AGROFARM 430 -> 1001) 30-454
30.8.7 - Steering column switch (AGROFARM 430 -> 1001) 30-455
30.8.8 - Shuttle ECU and forward/reverse selector (AGROFARM 430 -> 1001) 30-456
30.9 - M0 - Front PTO 30-457
30.9.1 - Front PTO (M0.00.01) (AGROFARM 430 -> 1001) 30-457
30.9.2 - PTO assembly. (AGROFARM 430 -> 1001) 30-461
30.9.3 - Pump assembly (AGROFARM 430 -> 1001) 30-472
30.9.4 - Clutch-brake assembly (AGROFARM 430 -> 1001) 30-474
30.9.5 - Front PTO oil cooler (M0.03.01) (AGROFARM 430 -> 1001) 30-481
30.9.6 - Solenoid valve assembly (AGROFARM 430 -> 1001) 30-482
30.10 - N0 - Front lift 30-483
30.10.1 - Front lift (AGROFARM 430 -> 1001) 30-483
30.10.2 - Disassembly of front lift cylinders (AGROFARM 430 -> 1001) 30-486
30.11 - R0 - Rear lift 30-490
30.11.1 - Lift - Complete assembly (R0.02.03) (AGROFARM 430 -> 1001) 30-490
30.11.2 - Disassembly of the lift- complete assembly (AGROFARM 430 -> 1001) 30-494
30.11.3 - Lift cylinder (AGROFARM 430 -> 1001) 30-499
30.11.4 - Bushes (AGROFARM 430 -> 1001) 30-501
307.W.0270.en.6.01-AGROFARM 410 VI VI 307.W.0270.en.6.01-AGROFARM 410 VI VI 7/8/2010 9:06:32 PM 7/8/2010 9:06:32 PM
TABLE OF CONTENTS
VII
30.11.5 - Auxiliary lift cylinders (AGROFARM 430 -> 1001) 30-502
30.11.6 - Disassembly of the lift control valve (AGROFARM 430 -> 1001) 30-504
30.11.7 - Mechanical draft sensor (AGROFARM 430 -> 1001) 30-511
30.11.8 - Mechanical draft sensor disassembly (AGROFARM 430 -> 1001) 30-512
30.11.9 - 3-point linkage (AGROFARM 430 -> 1001) 30-514
30.12 - S0 - Wheels 30-516
30.12.1 - Front wheels (S0.01.01) (AGROFARM 430 -> 1001) 30-516
30.12.2 - Rear wheels (S0.02.01) (AGROFARM 430 -> 1001) 30-517
30.13 - V0 - Ballast - towing hitches 30-518
30.13.1 - Towing hitch slide (V0.02.01) (AGROFARM 430 -> 1001) 30-518
40 - WIRING DIAGRAMS
40.1 - Introduction 40-2
40.1.1 - Structure of the unit (AGROFARM 430 -> 1001) 40-2
40.1.2 - Wiring index (AGROFARM 430 -> 1001) 40-8
40.1.3 - Components index (AGROFARM 430 -> 1001) 40-9
40.2 - Systems 40-23
40.2.1 - Earthing points (AGROFARM 430 -> 1001) 40-23
40.2.2 - Starting and preheating (AGROFARM 430 -> 1001) 40-27
40.2.3 - Electronic engine control (AGROFARM 430 -> 1001) 40-29
40.2.4 - Diagnostics - Accessories - Version with standard cab (AGROFARM 430 -> 1001) 40-31
40.2.5 - Diagnostics - Accessories - Version with high-visibility cab (AGROFARM 430 -> 1001) 40-33
40.2.6 - Instrument panel (AGROFARM 430 -> 1001) 40-35
40.2.7 - Worklights - Version with standard cab without front lift (AGROFARM 430 -> 1001) 40-37
40.2.8 - Worklights - Version with standard cab with front lift (AGROFARM 430 -> 1001) 40-39
40.2.9 - Worklights - Version with high-visibility cab without front lift (AGROFARM 430 -> 1001) 40-41
40.2.10 - Worklights - Version with high-visibility cab with front lift (AGROFARM 430 -> 1001) 40-43
40.2.11 - Heater - Version with standard cab (AGROFARM 430 -> 1001) 40-45
40.2.12 - Heater - Version with high-visibility cab (AGROFARM 430 -> 1001) 40-47
40.2.13 - Manual climate control - Version with standard cab (AGROFARM 430 -> 1001) 40-49
40.2.14 - Manual climate control - Version with high-visibility cab (AGROFARM 430 -> 1001) 40-51
40.2.15 - Steering column lights switch - Version with cab without front lift (AGROFARM 430 ->
1001) 40-54
40.2.16 - Steering column lights switch - Version with cab with front lift (AGROFARM 430 ->
1001) 40-56
40.2.17 - Windscreen wipers - Version with standard cab (AGROFARM 430 -> 1001) 40-58
40.2.18 - Windscreen wipers - Version with high-visibility cab (AGROFARM 430 -> 1001) 40-60
40.2.19 - Transmission (AGROFARM 430 -> 1001) 40-62
40.2.20 - PTO (AGROFARM 430 -> 1001) 40-65
40.2.21 - Can Bus (AGROFARM 430 -> 1001) 40-67
40.2.22 - Brakes (AGROFARM 430 -> 1001) 40-69
40.3 - Wiring harnesses 40-71
40.3.1 - Battery wiring - 0.014.8806.4/20 (AGROFARM 430 -> 1001) 40-71
40.3.2 - Positions of battery wiring connectors (AGROFARM 430 -> 1001) 40-72
40.3.3 - Power supply wiring - 0.015.1983.4/10 (AGROFARM 430 -> 1001) 40-77
307.W.0270.en.6.01-AGROFARM 410 VII VII 307.W.0270.en.6.01-AGROFARM 410 VII VII 7/8/2010 9:06:32 PM 7/8/2010 9:06:32 PM
TABLE OF CONTENTS
VIII
40.3.4 - Positions of power supply wiring connectors (AGROFARM 430 -> 1001) 40-78
40.3.5 - Preheating wiring - 0.014.9195.4/20 (AGROFARM 430 -> 1001) 40-80
40.3.6 - Positions of pre-heating wiring connectors (AGROFARM 430 -> 1001) 40-81
40.3.7 - Hood lights wiring - 0.014.8107.4/30 (AGROFARM 430 -> 1001) 40-85
40.3.8 - Positions of hood lights wiring connectors (AGROFARM 430 -> 1001) 40-86
40.3.9 - Engine wiring - Version with front battery - 0.016.2000.4/10 (AGROFARM 430 -> 1001)
40-88
40.3.10 - Positions of engine wiring connectors - version with front battery (AGROFARM 430 ->
1001) 40-90
40.3.11 - Engine wiring - Version with lateral battery - 0.016.2001.4 (AGROFARM 430 -> 1001) 40-94
40.3.12 - Positions of engine wiring connectors - version with lateral battery (AGROFARM 430 ->
1001) 40-96
40.3.13 - Engine wiring - 04215653 (AGROFARM 430 -> 1001) 40-100
40.3.14 - Positions of engine wiring connectors (AGROFARM 430 -> 1001) 40-101
40.3.15 - Front PTO solenoid valve wiring - 0.008.0913.3 (AGROFARM 430 -> 1001) 40-103
40.3.16 - Central wiring - 0.015.7021.4/60 (AGROFARM 430 -> 1001) 40-104
40.3.17 - Positions of central wiring connectors (AGROFARM 430 -> 1001) 40-109
40.3.18 - Drivetrain wiring - 0.015.7023.4/20 (AGROFARM 430 -> 1001) 40-116
40.3.19 - Positions of drivetrain wiring connectors (AGROFARM 430 -> 1001) 40-118
40.3.20 - Drivetrain shuttle wiring - 0.015.1998.4/10 (AGROFARM 430 -> 1001) 40-122
40.3.21 - Positions of drivetrain shuttle lever wiring connectors (AGROFARM 430 -> 1001) 40-123
40.3.22 - Cab shuttle wiring - 0.015.1418.4/30 (AGROFARM 430 -> 1001) 40-125
40.3.23 - Positions of cab shuttle lever wiring connectors (AGROFARM 430 -> 1001) 40-127
40.3.24 - Cab power supply wiring - 0.016.0373.4/20 (AGROFARM 430 -> 1001) 40-129
40.3.25 - Positions of cab power supply wiring connectors (AGROFARM 430 -> 1001) 40-130
40.3.26 - Cab roof wiring - Version with standard cab - 0.016.0865.4/10 (AGROFARM 430 ->
1001) 40-132
40.3.27 - Positions of cab roof wiring connectors - Version with standard cab (AGROFARM 430
-> 1001) 40-135
40.3.28 - Cab roof wiring - Version with high-visibility cab - 0.015.6272.4/40 (AGROFARM 430 ->
1001) 40-137
40.3.29 - Positions of cab roof wiring connectors - Version with high-visibility cab (AGROFARM
430 -> 1001) 40-140
40.3.30 - Heater wiring - Version with standard cab - 0.010.2147.2 (AGROFARM 430 -> 1001) 40-144
40.3.31 - Positions of heating system wiring connectors - Version with standard cab
(AGROFARM 430 -> 1001) 40-145
40.3.32 - Air conditioning wiring - Version with standard cab - 0.010.2153.2 (AGROFARM 430 ->
1001) 40-146
40.3.33 - Positions of air conditioner wiring connectors - Version with standard cab (AGROFARM
430 -> 1001) 40-147
40.3.34 - Air conditioning condenser fan wiring - Version with standard cab - 0.009.7853.3/20
(AGROFARM 430 -> 1001) 40-148
40.3.35 - Positions of air conditioning condenser fan wiring connectors - Version with standard
cab (AGROFARM 430 -> 1001) 40-149
40.3.36 - Air conditioning condenser fan wiring - Version with high-visibility cab - 0.015.7266.4/30
(AGROFARM 430 -> 1001) 40-150
307.W.0270.en.6.01-AGROFARM 410 VIII VIII 307.W.0270.en.6.01-AGROFARM 410 VIII VIII 7/8/2010 9:06:32 PM 7/8/2010 9:06:32 PM
You're Reading a Preview
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$52.99
Viewed 16 Times Today
Secure transaction
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$52.99
This is the Complete Deutz Fahr Agrofarm 410 / 420 / 430 Tractor Service & Repair Manual.
The following tractors are covered in this manual:
- Agrofarm 410 > 16001
- Agrofarm 410 > 20001
- Agrofarm 420 > 16001
- Agrofarm 420 > 20001
- Agrofarm 430 > 1001
- Agrofarm 430 > 5001
This irreplaceable technical manual includes indispensable instructions to maintain and service your engines using detailed diagrams and manufacturers specifications.
Navigation is simple with chapter bookmarks and ability to search by keyword.
INSTANT ACCESS - NO WAITING
LANGUAGE: English
FORMAT: DIGITAL
COMPATIBLE: All Versions of Windows & Mac
PAGES: 956
SEARCHABLE - BOOKMARKED - INDEXED
Completely Bookmarked chapters for easy navigation that allow you to identify the service repair procedures in the quickest time possible.
Comprehensive illustrations, exploded diagrams, drawings and photos guide you through the service repair procedures.
This manual is Indexed, Bookmarked and Searchable.
SECTIONS INCLUDE:
- 00 - Introduction
- 10 - Technical Characteristics
- 20 - Calibrations and Electronic Diagnosis
- 30 - Method of Intervention
- 40 - Wiring Diagrams
There are lots of pictures, diagrams, illustrations and charts.
This manual is perfect for tune-ups, regular maintenance and repairs.
Mechanical details and step-by-step instructions you will need are included!
Additional Information:
Documents may require the newest version of Acrobat Reader to display correctly. Should you have any problems reading your document, please initially try upgrading to the latest version of Adobe Acrobat Reader.
We have Thousands of Manuals - email us about any you might need.
