Case IH CX50/CX60/CX70/CX80/CX90/CX100 Tractors Service & Repair Manual

Get your hands on the complete service and repair manual for the Case IH CX50/CX60/CX70/CX80/CX90/CX100 Tractor models. This comprehensive manual covers all essential information and procedures needed for servicing and repairing your tractor, making it invaluable for both professional mechanics and DIY enthusiasts.

• GENERAL
  • How it Works
  • Safety Rules, General Information and Torque Specifications
  • General Specifications and Torques
  • Special Tools
• ENGINE
  • How it Works
  • Engine Removal and Installation
  • NOTE: For Service and Overhaul procedures refer to your Engine Service Manual
• FUEL SYSTEM
  • Fuel Tank Removal and Servicing
• ELECTRICAL
  • How it Works and Electrical Schematics
  • Instrument Cluster Programming and Troubleshooting
  • Battery Servicing and Testing
• STEERING
  • Steering Column and Hand Pump
  • 2WD Steering Cylinder
  • 2WD Front Axle
• TRANSMISSION
  • How it Works
  • Separating the Tractor (between Engine and Speed Transmission)
  • Engine Clutch and Master Cylinder
  • Powershift and Forward/Reverse
  • Transmission Servicing
  • Creep Transmission Servicing
  • 8 Speed Transmission Servicing
  • Synchronizer Speed Transmission Servicing
  • Range Transmission Servicing (2WD)
  • Rear Axles
  • MFD Transfer Gearbox, Drive Shaft and Parking Brake
  • Differential
  • Differential - from Transmission Serial Number JKA412637 and Creep Transmissions
  • PTO
  • Shiftable PTO
  • Front PTO
  • MFD Axle - up to Axle Serial Number 37835
  • MFD Axle - from Axle Serial Number 37836
• BRAKES
  • How it Works
  • Service Brakes and Master Cylinder
  • Parking Brake (2WD)
  • Hydraulic Trailer Brake
• HYDRAULICS
  • How it Works
  • How to Read Symbols in a Hydraulic Schematic
  • Hydraulic Troubleshooting and Schematic
  • Filter Manifold and Main Hydraulic Pump
  • Steering Hydraulic Pump
  • Regulator Valve
  • Differential Lock Cylinder and Solenoid
  • Unloading Valve
  • Remote Valves
  • Hitch Valve and EDC Manifold
  • Hydraulic Housing and Lift Cylinder
  • Front Hitch
• CHASSIS AND MOUNTED EQUIPMENT
  • Pedal, Lever and Switch Adjustments
  • Air Conditioner System Component Servicing
  • Cab Removal and Tilting the Cab Roof
  • Cab Mountings
• CONTROLLER SYSTEMS
  • Calibration, Error Codes, Troubleshooting and Schematics (Tractors not equipped with Ride Control)
  • Calibration, Error Codes, Troubleshooting and Schematics (Tractors equipped with Ride Control)
  • Programming the Hitch/MFD/Differential Lock Controller

This high-quality manual ensures that all pages are printable, eliminating the need for shipping or waiting for physical media. It is a comprehensive resource for all your Case IH Tractor repair and maintenance requirements.