Case IH 7210, 7220, 7230, 7240, 7250 Tractors Operators Manual
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
If Safety Decals on this machine use the words Danger, Warning or Caution,
which are defined as follows:
â—Ź DANGER: Indicates an immediate hazardous situation which if not avoided,
will result in death or serious injury. The color associated with Danger is RED.
â—Ź WARNING: Indicates an potentially hazardous situation which if not avoided,
will result in serious injury. The color associated with Warning is ORANGE.
â—Ź CAUTION: Indicates an potentially hazardous situation which if not avoided,
may result in minor or moderate injury. It may also be used to alert against
unsafe practices. The color associated with Caution is YELLOW.
If Safety Decals on this machine are ISO two panel Pictorial, decals are defined
as follows:
â—Ź The first panel indicates the nature of the hazard.
â—Ź The second panel indicates the appropriate avoidance of the hazard.
â—Ź Background color is YELLOW.
â—Ź Prohibition symbols such as and if used, are RED.
© 1998 Case Corporation Rac 9-29022
October, 1996 (Revised June, 1998)
CASE and IH are registered trade marks of Case Corporation
CASE TECHNICAL MANUALS
Manuals are available from your Dealer for the operation,
service and repair of your machine. For prompt convenient
service, contact your Dealer for assistance in obtaining the
manuals for your machine.
Your Dealer can expedite your order for operators manuals,
parts catalogs, service manuals and maintenance records.
Always give the Machine Name, Model and P.I.N. (product
identification number) or S.N. (serial number) of your
machine so your Dealer can provide the correct manuals for
your machine.
NOTE: Case Corporation reserves the right to make improvements in
design or changes in specifications at any time without incurring any
obligation to install them on units previously sold.
THIS SAFETY ALERT SYMBOL INDICATES IMPORTANT SAFETY
MESSAGES IN THIS MANUAL. WHEN YOU SEE THIS SYMBOL,
CAREFULLY READ THE MESSAGE THAT FOLLOWS AND BE
ALERT TO THE POSSIBILITY OF PERSONAL INJURY OR DEATH.
M171B
!
STOP
WARNING
!
IMPROPER OPERATION OF THIS MACHINE CAN CAUSE INJURY OR
DEATH. BEFORE USING THIS MACHINE, MAKE CERTAIN THAT EVERY
OPERATOR:
â—Ź Is instructed in safe and proper use of the machine.
â—Ź Reads and understands the Manual(s) pertaining to the machine.
â—Ź Reads and understands ALL Safety Decals on the machine.
â—Ź Clears the area of other persons.
â—Ź Learns and practices safe use of machine controls in a safe, clear area
before operating this machine on a job site.
It is your responsibility to observe pertinent laws and regulations and
follow Case Corporation instructions on machine operation and
maintenance.
I
TRIM THIS EDGE
TRIM THIS EDGE
RIGHT PAGE
Template Name: OM_1_col
Template Date: 1994_05_26
Alt= to hide template information
Alt+ to display template information
GENERAL TABLE OF CONTENTS
TO THE OWNER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
IDENTIFICATION NUMBERS/MACHINE COMPONENTS . . . . . . . . . . . . . . . . . . . . . . . 3
MACHINE COMPONENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
SAFETY/DECALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
DECALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
ROLL OVER PROTECTIVE STRUCTURE (ROPS) . . . . . . . . . . . . . . . . . . . . . . . . . 15
INSTRUMENTS/CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
AUTOMATIC SHUTDOWN SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
DIGITAL INSTRUMENT CLUSTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
OPERATING CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
OPERATING INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
BEFORE STARTING THE ENGINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
SERVICE INDICATOR LAMPS AND BAR GRAPH DISPLAYS . . . . . . . . . . . . . . . . . 56
RUN-IN PROCEDURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
NORMAL STARTING PROCEDURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
STOPPING THE ENGINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
COLD TEMPERATURE OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
TOWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
HOW TO TRANSPORT THE TRACTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
POWER SHIFT TRANSMISSION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
DIFFERENTIAL LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
MFD OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
DIGITAL INSTRUMENT CLUSTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
CAB AIR FLOW ARRANGEMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
AIR CONDITIONER OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
POWER TAKEOFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
DRAWBAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
TRACTOR WARNING LAMPS AND
DIRECTION TURN SIGNALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
FIELD OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
DRAWBAR PREPARATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
THREE POINT HITCH PREPARATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
HITCH SYSTEM ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
HITCH OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
REMOTE HYDRAULICS PREPARATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
REMOTE HYDRAULICS OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
LOADER OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
CHEMICAL TANK MOUNTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
AUXILIARY POWER CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
II
TRIM THIS EDGE
TRIM THIS EDGE
LEFT PAGE
Template Name: OM_1_col
Template Date: 1994_05_26
Alt= to hide template information
Alt+ to display template information
TRAILER HYDRAULIC BRAKE CONNECTOR
(IF EQUIPPED) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
PNEUMATIC TRAILER BRAKE COUPLINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
(IF EQUIPPED) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
TRUE GROUND SPEED SENSOR HARNESS . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
CAB REAR ACCESS PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
MONITOR MOUNTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
INSTRUMENT CLUSTER PROGRAMMING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
TIRES/WHEELS/SPACING/BALLAST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
TIRE AND RIM EQUIPMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
TIRE LOAD AND INFLATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
TIRE AND RIM SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
TREAD POSITIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
AXLE ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
FRONT WHEEL FENDERS (IF EQUIPPED) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
TIRE SIZE COMBINATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
TRACTOR BALLAST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
LUBRICATION/FILTERS/FLUIDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
LUBRICATION/MAINTENANCE CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
GREASE FITTINGS - 10 HOURS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
GREASE FITTINGS - 50 HOURS (MFD AXLE) . . . . . . . . . . . . . . . . . . . . . . . . . 200
SYSTEM CAPACITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
HOOD AND SIDE PANELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
SERVICE HOUR INTERVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
ENGINE LUBRICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
ENGINE LUBRICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
COOLING SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
FUEL SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
AIR INDUCTION SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
TRANSMISSION LUBRICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
DIFFERENTIAL LUBRICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238
PLANETARY LUBRICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239
MAINTENANCE/ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240
COMPRESSOR BELT AND FAN/ALTERNATOR BELT . . . . . . . . . . . . . . . . . . . . . 240
PNEUMATIC TRAILER BRAKE COMPRESSOR BELT . . . . . . . . . . . . . . . . . . . . . 243
HOOD LATCH ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245
ENGINE VALVE ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245
OPERATORS CAB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246
ELECTRICAL SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257
GENERAL SERVICE INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259
BATTERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261
III
TRIM THIS EDGE
TRIM THIS EDGE
RIGHT PAGE
Template Name: OM_1_col
Template Date: 1994_05_26
Alt= to hide template information
Alt+ to display template information
BULB AND LAMP REPLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
DIESEL ENGINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
TRAVEL SPEEDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
APPROXIMATE MEASUREMENTS AND WEIGHTS . . . . . . . . . . . . . . . . . . . . . . . 280
DETAIL INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288
IV
TRIM THIS EDGE
TRIM THIS EDGE
LEFT PAGE
Template Name: OM_1_col
Template Date: 1994_05_26
Alt= to hide template information
Alt+ to display template information
1
TRIM THIS EDGE
TRIM THIS EDGE
RIGHT PAGE
Template Name: OM_1_col
Template Date: 1995_11_22
Alt= to hide template information
Alt+ to display template information
TO THE OWNER
7200 Pro Series Tractor with
Mechanical Front Drive
RD97J006
CASE CORPORATION
24th and Mead Street
Racine, WI 53403
U.S.A.
522L94
DEALER STAMP
TO THE OWNER
2
TRIM THIS EDGE
TRIM THIS EDGE
LEFT PAGE
Template Name: OM_1_col
Template Date: 1995_11_22
Alt= to hide template information
Alt+ to display template information
TO THE OWNER
This manual contains important information about the safe operation, adjustment and
maintenance of your Case Tractor. Refer to the Detail Index at the end of this manual for
locating specific items about your machine.
DO NOT operate or permit anyone to operate or service this machine until you or the other
persons have read this manual. Use only trained operators who have demonstrated the ability
to operate and service this machine correctly and safely.
This tractor, with standard equipment and authorized attachments, is intended to be used for
farming, ranching, etc.
DO NOT use this machine for any application or purpose other than those described in this
manual. Consult an authorized dealer or the Case Corporation on changes, additions or
modifications that can be required for this machine to comply with various country regulations
and safety requirements. Unauthorized modifications will cause serious injury or death.
Anyone making such unauthorized modifications is responsible for the consequences.
This Operators Manual is to be stored in the manual compartment equipped on this machine.
Make sure this manual is complete and in good condition. Contact your dealer to obtain
additional manuals. Contact your dealer for any further information or assistance about your
machine. Your dealer has Case Corporation approved service parts. Your dealer has
technicians with special training that know the best methods of repair and maintenance for your
tractor.
DECLARATION OF CONFORMITY
This tractor complies with the provisions of
directive 89/336/EEC Electromagnetic
Compatibility.
OPERATORS MANUAL
STORAGE COMPARTMENT
A20554
3
TRIM THIS EDGE
TRIM THIS EDGE
RIGHT PAGE
Template Name: OM_1_col
Template Date: 1995_11_22
Alt= to hide template information
Alt+ to display template information
IDENTIFICATION NUMBERS/MACHINE COMPONENTS
PRODUCT IDENTIFICATION AND
SERIAL NUMBERS
Write your machine Model Number, Product Identification Number (P.I.N.), and Serial Numbers
of major components on the lines provided. If needed, give these numbers to your dealer when
you need parts or information for your machine.
1. TRACTOR MODEL NUMBER _____________________________________________
2. PRODUCT IDENTIFICATION NUMBER * JJA ________________________________*
3. ENGINE SERIAL NUMBER ______________________________________________
4. TRANSMISSION SERIAL NUMBER________________________________________
5. CAB SERIAL NUMBER___________________________________________________
6. MFD AXLE SERIAL NUMBER_____________________________________________
You're Reading a Preview
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$71.99
Viewed 18 Times Today
Secure transaction
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$71.99
Case IH 7210, 7220, 7230, 7240, 7250 Tractors Operators Manual
Models covered:
- Case IH 7210
- Case IH 7220
- Case IH 7230
- Case IH 7240
- Case IH 7250
The Case IH 7210, 7220, 7230, 7240, 7250 Tractors Operators Manual is your guide to running and maintaining these workhorses in the field. Whether you’re pulling tillage gear or just topping off fluids before a long day, this manual spells it out in plain language.
Inside, you’ll find step-by-step operating procedures, fluid specs, routine maintenance tasks, and safety guidelines tailored to the full 7200-series lineup. From starting procedures and PTO operation to hitch adjustments, ballast setup, and field application prep—it's all covered in detail. It also walks you through component IDs, tire settings, air systems, and daily inspections.
Content overview:
- General information, machine components, and identification numbers
- Safety guidelines, decals, and ROPS (Roll Over Protective Structure) details
- Instrument panel overview, digital cluster functions, and operating controls
- Operating instructions: engine starting, stopping, towing, power shift transmission, differential lock, PTO operation, and air conditioning
- Field operations: drawbar prep, three-point hitch setup, hitch system adjustments, loader use, remote hydraulics, auxiliary power connections, and chemical tank mounting
- Tire, wheel, and ballast information: load charts, inflation, tread positions, axle adjustment, tire size combinations, and tractor ballast
- Lubrication and fluids: service intervals, grease points, system capacities, engine lubrication, cooling system, fuel system, transmission, differential, and planetary lubrication
- Maintenance and adjustments: belts, valve adjustments, cab adjustments, pneumatic trailer brake compressor, and service hour intervals
- Electrical system: specifications, batteries, wiring, bulb and lamp replacement, and general service guidelines
- Technical specifications: diesel engine data, travel speeds, measurements, and weight information
Built for both seasoned hands and folks new to the red tractors, this operators manual strikes a solid balance between practical instructions and essential service know-how.
Printable: Yes
Language: English
Compatibility: Pretty much any electronic device, incl. PC & Mac computers, Android and Apple smartphones & tablet, etc.
Requirements: Adobe Reader (free)
