Case IH SCX100 Operators Manual

6&; 3LYRW 7RQJXH 0RZHU&RQGLWLRQHU 7UDLO )UDPH 2SHUDWRU·V 0DQXDO  5HSODFHV 

0-1 TO THE OWNER This manual contains information concerning the adjustment and maintenance of your Case IH Model SCX100 pivot tongue frame. You have purchased a dependable machine, but only by proper care and operation can you expect to receive the performance and long service built into this pivot tongue frame. Please have all operators read this manual carefully and keep it available for ready reference. Your Case IH dealer will instruct you in the general operation of your pivot tongue frame. (Refer to the Delivery Report at the back of this manual.) Your dealers staff of factory-trained service technicians will be glad to answer any questions that may arise regarding the operation of your pivot tongue frame. Your Case IH dealer carries a complete line of genuine Case IH service parts. These parts are manufactured and carefully inspected to insure high quality and accurate fitting of any necessary replacement parts. Be prepared to give your dealer the model and product identification number (PIN) of the pivot tongue frame, when ordering parts. Locate these numbers now and record them below. Refer to the General Information section of this manual for the location of the model and PIN of your pivot tongue frame. Model PIN WARNING This safety alert symbol indicates important safety messages in this manual. When you see this symbol, carefully read the message that follows and be alert to the possibility of personal injury or death. WARNING Pictures in this manual may show protective shielding open or removed to better illustrate a particular feature or adjustment. Be certain, however, to close or replace all shielding before operating the machine. IMPROVEMENTS CNH America LLC is continually striving to improve its products. We reserve the right to make improvements or changes when it becomes practical and possible to do so, without incurring any obligation to make changes or additions to the equipment sold previously.

0-2 CONTENTS SAFETY 0-5 ........................................................ GENERAL INFORMATION 1-1 ....................................... OPERATION 2-1 .................................................... LUBRICATION 3-1 .................................................. MAINTENANCE 4-1 ................................................. TROUBLESHOOTING 5-1 ........................................... OPTIONAL EQUIPMENT 6-1 ......................................... SPECIFICATIONS 7-1 ............................................... INDEX 7-3 ......................................................... DELIVERY REPORT 7-5 .............................................

0-3 CALIFORNIA Proposition 65 Warning Diesel engine exhaust and some of its constituents are known to the State of California to cause cancer, birth defects, and other reproductive harm. Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

0-4 PRECAUTIONARY STATEMENTS PERSONAL SAFETY Throughout this manual and on machine decals, you will find precautionary statements (DANGER, WARNING, and CAUTION) followed by specific instructions. These precautions are intended for the personal safety of you and those working with you. Please take the time to read them. DANGER This word DANGER indicates an immediate hazardous situation that, if not avoided, will result in death or serious injury. The color associated with Danger is RED. WARNING This word WARNING indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury. The color associated with Warning is ORANGE. CAUTION This word CAUTION indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices. The color associated with Caution is YELLOW. FAILURE TO FOLLOW THE DANGER, WARNING, AND CAUTION INSTRUCTIONS MAY RESULT IN SERIOUS BODILY INJURY OR DEATH. MACHINE SAFETY The precautionary statement (IMPORTANT) is followed by specific instructions. This statement is intended for machine safety. IMPORTANT: The word IMPORTANT is used to inform the reader of something he needs to know to prevent minor machine damage if a certain procedure is not followed. INFORMATION NOTE: Instructions used to identify and present supplementary information. ASAE S441.3 FEB04 ISO 11684

0-5 SAFETY PRECAUTIONARY STATEMENTS A careful operator is the best operator. Most accidents can be avoided by observing certain precautions. To help prevent accidents, read the following precautions before operating this machine. This machine should be operated by only by those who are responsible and instructed to do so. Carefully review the procedures given in this manual. It is important that all operators be familiar with and follow safety procedures. 1. Before operating the machine, study this Operators Manual safety messages. Read all safety signs on machine. Clear the area of other persons. Learn and practice safe use of controls before operating. It is your responsi- bility to understand and follow manufactur- ers instructions on machine operation, service, and to observe pertinent laws and regulations. Operator and Repair Manuals may be obtained from your equipment dealer. 2. ALWAYS turn OFF the tractor engine, remove the key, and make sure all motion has stopped before servicing, cleaning, lubrication or making any adjustments on the machine. 3. Do not start the machine until you are sure that no tools are lying on it. 4. Do not wear loose fitting clothing, jewelry, watches, or other items that can get caught in moving parts. Tie up long hair that can get caught in moving parts. 5. Do not attempt to remove material from any part of the machine while it is in operation. 6. Do not leave the tractor while the tractor PTO or hydraulic drive is engaged. 7. Always replace or close all shields after making repairs, adjustments, or after lubrication. Shields are used for your protection. Keep them in place! 8. Do not allow anyone to ride on the machine. 9. Use the proper size hitch pin with safety cotter at all times. 10. Use of the safety chain is required when towing the machine on public roadways. 11. When you disconnect and later reattach the machine to a standard electrical socket on propelling vehicle, the brake light must be reconnected to function. 12. Replace any safety signs that are missing or cannot be read. Replacement safety signs are available from your local dealer. 13. Hydraulic oil leaking under pressure can penetrate the skin and cause infection or other injury. To prevent personal injury: relieve all pressure, before disconnecting fluid lines or performing work on the hydraulic system. Before applying pressure, make sure all connections are tight and components are in good condition. Never use your hand to check for suspected leaks under pressure. Use a piece of cardboard or wood for this purpose. If injured by leaking fluid, see your doctor immediately. 14. Understand and comply with state and local laws governing highway safety regulations concerning transporting a machine on public roads. Make sure road lamps, safety mark- ings, and all safety devices are installed and in working order. 15. When assembling, operating or servicing the machine, wear protective clothing and personal safety devices that are necessary for the particular procedure. Some personal safety devices that may be necessary are protective shoes, face and/or eye protection, hard hat, heavy gloves, filter mask and hearing protection. 16. Keep the area used for servicing the machine clean and dry. Wet or oily floors are slippery. Wet spots can be dangerous when working with electrical equipment. Be sure all electrical outlets and tools are properly grounded. 17. Always lower the header to the ground or engage the transport stops when parking.

0-6 18. Always use the header transport stops and spring-loaded tongue safety lock when transporting the machine. 19. Never work under a raised header unless it is securely locked with the header transport stops. 20. Always block the wheels before working on or under the machine. 21. Limit towing speeds to 32 km/hr (20 MPH) maximum. 22. Never stand behind the mower-conditioner while it is running. 23. Operate the machine only at the PTO speed for which it is designed. Attach a 540 RPM implement only to a 540 RPM PTO and a 1000 RPM implement to a 1000 RPM PTO. 24. Be sure no one is standing near the machine before raising or lowering the header. 25. DO NOT weld on wheels. Welding on wheels may cause high stress and a wheel failure. 26. DO NOT weld on wheels with a mounted tire. Welding on wheels with a mounted tire may cause the tire to burst, causing serious injury or death.

0-7 SAFETY DECALS The following safety decals have been placed on your machine in the areas indicated. They are intended for your personal safety and for those working with you. Please take this manual and walk around your machine to note the content and location of these warning signs. Review these warning signs and the operating instructions detailed in this manual with your machine operators. Keep the decals legible. If they are not, obtain replacements from your authorized dealer. The decal replacement part numbers are listed with each decal. 20024016 1 9 2 3 20022842 5 5 1 8 10 10 10 10 8 6 11 10 9 10 9 8 7

0-8 1 2 3 4 5 Part #86622073 WARNING: Read the complete Operators Manual and become familiar with starting, operating and safety instructions before operating. Contact your Dealer to replace the Operators Manual if it is missing. Failure to comply could result in death or serious injury. Part #770033 WARNING: Ensure that the tongue safety lock is engaged when transporting to prevent accidental movement of the header. Failure to comply could result in death or serious injury. Part #86624774 DANGER: Do Not work around a raised header without cylinder locks in place or resting header on ground. Failure to comply will result in death or serious injury. Part #86537465 (540 RPM Gearbox only) DANGER: Do Not operate Tractor with PTO shield missing. Reinstall all shields when gearbox is removed. Failure to comply will result in death or serious injury. Part #9826789 DANGER: Do Not operate the unit with the drive line shields removed. Keep all shields serviced and in place. Failure to comply will result in death or serious injury.

0-9 8 Part #86547781 Reflective Tape, Red 9 Part #86547783 Reflective Tape, Orange Part #86547782 Reflective Tape, Yellow Part #86547710 Slow--Moving--Vehicle Sign 6 Part #86537465 DANGER: Tractor operation with an exposed PTO shaft is dangerous. If the tractor PTO shield has been removed to allow installation of this gearbox, it must be reattached when the gearbos is removed. Failure to do so could result in serious injury or death. 7 Part #87041060 WARNING: Properly prepare machine for transport/ roading. 20 mph [32 kph] -- MAX. road speed. Towing unit must be equipped with compatible electrical connections to operate lights. Towing unit must weigh at least .67 x weight of towed machine. Use caution when making turns to avoid loss of control. Failure to comply could result in death or serious injury. 11 10

You're Reading a Preview

Case IH SCX100 Operators Manual

Description

Reviews

Q&A

Recently Viewed