PC Android Wireless Bluetooth OBD2 Diagnostic Tool
PC /Android Wireless Bluetooth OBD2 Diagnostic Tool
Problems with your car? Would you like to save money at the garage? Diagnose your own car problems and know exactly what your fault is. A garage will charge you 5 minutes of their time and charge you an extortionate fee. Why? When you can do it yourself with this fanstastic tool.
The tool itself is a life and money saver - you'll use it for years to come - and be a much wiser car enthusiast.
Easy to Install and Use:
1) Install the software on your:
3) Turn the ignition on (no need to start the car)
4) Pair the Bluetooth OBD2 Module with your PC / Android Phone or Tablet
5) Start up the software
The Package Includes:
1 x EOBD / OBD2 Bluetooth Scanner
Even if you don't repair the vehicle yourself, knowing the Diagnostic Trouble Code number before taking the vehicle in for repair, the less likely you will be ripped off. Or you can purchase an emanual / parts catalogue from us, and carry out the repair yourself.
Once the vehicle is repaired, the Diagnostic Trouble Code(s) can be erased and the Check Engine light extinguished using this scan tool.
In areas that require smog / emission tests, an illuminated Check Engine light fails the test, even if the vehicle might otherwise pass inspection. This OBD II Scan Tool gets rid of the Check Engine light.
Remember, not all Diagnostic Trouble Codes illuminate the Check Engine light and a scan tool is the only way to obtain the information.
Does this Code Scanner Work on my Car?
This OBD2 Code Scanner is designed to work on all OBD2 compliant vehicles. It is required by Law in most countries that all 1996 and newer vehicles (cars and light trucks) sold around the world must be OBD2 compliant.
Some 1994 and 1995 model year vehicles are also OBD2 compliant. To verify if your vehicle is OBD2 compliant or not, check the Vehicle Emissions Control Information Label which is usually located under the hood or by the radiator. If the vehicle is OBD2 compliant, the label will state "OBD II Certified". Besides, all OBD2 compliant vehicles must have a 16-pin Data Link Connector (DLC) which is usually located under the instrument panel of the vehicle.
Where is the Connector Located?
The connector must be located within three feet of the driver and must not require any tools to be revealed. Look under the dash and behind ashtrays.
PLEASE READ BELOW BEFORE PURCHASING
The unit should work with any car, which is OBD2 compliant. A worldwide law was passed stating that all car manufacturers had to open their cars to be allowed to be used with universal tools. This was introduced so car manufacturers could not trap customers and force them to pay extortoinate fees to work on their vehicles.
Displaying 1 to 3 (of 3 reviews)
by Radoslav Nachev
Date Added: Tuesday 29 July, 2014
This was recommended by emanual support upon my request what type of OBD Tool do I need. It... Read moreThis was recommended by emanual support upon my request what type of OBD Tool do I need. It arrived on time and worked as described, just follow the instructions once you got it. I recommend it if you would like to handle diagnostics in your home/garage.
by David Paterson
Date Added: Wednesday 11 September, 2013
Good scanner and good product. Very good stuff at a very low price.Good scanner and good product. Very good stuff at a very low price.
by BERNARD SCOTT
Date Added: Monday 22 July, 2013
You will not find a product like this at a cheaper price out there. Great product was easy too use... Read moreYou will not find a product like this at a cheaper price out there. Great product was easy too use and install. I will buy more from this site in the near future.