2009-2011 Club Car Electric Precedent Service & Repair Manual
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
2009-2011 Electric Precedent
Maintenance and
Service Manual
IQ System and Excel System Vehicles
Manual Number 103472701
Edition Code 0309C1110B
FOREWORD
Club Car vehicles are designed and built to provide the ultimate in performance efficiency; however, proper
maintenance and repair are essential for achieving maximum service life and continued safe and reliable operation.
This manual provides detailed information for the maintenance and repair of the electric Precedent vehicles, and
should be thoroughly reviewed prior to servicing the vehicle. The procedures provided herein must be properly
implemented, and the DANGER, WARNING, and CAUTION statements must be heeded.
This manual was written for the trained technician who already possesses knowledge and skills in electrical and
mechanical repair. If the technician does not have such knowledge and skills, attempted service or repairs to the
vehicle may render the vehicle unsafe. For this reason, Club Car advises that all repairs and/or service be performed
by an authorized Club Car distributor/dealer representative or by a Club Car factory-trained technician.
It is the policy of Club Car, LLC to assist its distributors and dealers in continually updating their service knowledge
and facilities so they can provide prompt and efficient service for vehicle owners. Regional technical representatives,
periodic service bulletins, maintenance and service manuals, and other service publications also represent Club Car’s
continuing commitment to customer support.
Club Car offers a full line of training and continuing education classes for technicians who want to learn more about
our products. For more information, contact your local dealer or Club Car’s Technical Services department for a
list of upcoming classes.
This manual covers all aspects of typical vehicle service; however, unique situations sometimes occur when servicing a
vehicle. If it appears that a service question is not answered in this manual, please contact your nearest authorized
Club Car dealer or distributor for assistance. You may also write to us at: Club Car, LLC, P.O. Box 204658; Augusta,
GA 30917–4658 USA, Attention: Technical Services.
WARNING
• Read See Section 1 – Safety. before attempting any service on the vehicle.
• Before servicing vehicle, read complete section(s) and any referenced information that may be
relevant to the service or repair to be performed.
NOTE: This manual represents the most current information at the time of publication. Club Car, LLC is continually
working to further improve its vehicles and other products. These improvements may affect servicing
procedures. Any modification and/or significant change in specifications or procedures will be forwarded to all
Club Car dealers and will, when applicable, appear in future editions of this manual.
Club Car, LLC reserves the right to change specifications and designs at any time without notice and without
the obligation of making changes to units previously sold.
There are no warranties expressed or implied in this manual. See the limited warranty found in the vehicle
owner’s manual or write to Club Car, LLC, P.O. BOX 204658, Augusta, Georgia 30917 -4658 USA, Attention:
Warranty Department.
Copyright © 2009, 2010 Club Car, LLC
Club Car, Carryall, and ArmorFlex
are registered trademarks of Club Car, LLC
This manual effective August 4, 2008
2009-2011 Electric Precedent Maintenance and Service Manual Page i
CONTENTS
SECTION 1 – SAFETY ...................................................................................................................................... 1-1
General Warnings .......................................................................................................................................... 1-1
Disabling the Vehicle.................................................................................................................................. 1-2
Disconnecting the Batteries – Electric Vehicles ............................................................................................ 1-3
Connecting the Batteries – Electric Vehicles ................................................................................................ 1-3
Recycling Lead-Acid Batteries .................................................................................................................... 1-3
International safety symbols on batteries ..................................................................................................... 1-4
SECTION 2 – VEHICLE SPECIFICATIONS ........................................................................................................ 2-1
SECTION 3 – GENERAL INFORMATION ........................................................................................................... 3-1
Serial Number Identification............................................................................................................................ 3-1
Safety Committee .......................................................................................................................................... 3-2
Storage ......................................................................................................................................................... 3-2
Preparing the Electric Vehicle for Extended Off-Season Storage ................................................................... 3-3
Returning the Stored Electric Vehicle to Service .......................................................................................... 3-4
SECTION 4 – BODY AND TRIM......................................................................................................................... 4-1
Cleaning the Vehicle ...................................................................................................................................... 4-1
Seat .......................................................................................................................................................... 4-1
Front and Rear Body Repair ........................................................................................................................... 4-2
Stress Lines or Streaks .............................................................................................................................. 4-2
Minor Impact Damage/Deformations ........................................................................................................... 4-2
Minor Scratches and Surface Blemishes ..................................................................................................... 4-3
Gouges, Punctures, Tears, Large Scratches, and Abrasions ......................................................................... 4-3
Front Body .................................................................................................................................................... 4-3
Front Body Removal .................................................................................................................................. 4-3
Front Body Installation ............................................................................................................................... 4-3
Front Bumper ................................................................................................................................................ 4-5
Instrument Panel ........................................................................................................................................... 4-6
Instrument Panel Removal ......................................................................................................................... 4-6
Instrument Panel Installation ...................................................................................................................... 4-6
Floor Mat and Retainers ................................................................................................................................. 4-7
Floor Mat Retainer Removal ....................................................................................................................... 4-7
Floor Mat Retainer Installation .................................................................................................................... 4-7
Kick Plate and Charger Receptacle Bezel ....................................................................................................... 4-8
Kick Plate and Charger Receptacle Bezel Removal ..................................................................................... 4-8
Kick Plate and Charger Receptacle Bezel Installation................................................................................... 4-8
Rear Body – Two-Passenger Vehicles............................................................................................................. 4-9
Universal Accessory Mounting.................................................................................................................... 4-9
Backrest and Structural Accessory Module (SAM) ....................................................................................... 4-9
Rear Body Components (Two-Passenger) .................................................................................................. 4-11
Rear Body – Four-Passenger Vehicles .......................................................................................................... 4-13
Seat Backs.............................................................................................................................................. 4-13
Seat Support ........................................................................................................................................... 4-13
Foot Deck ............................................................................................................................................... 4-14
Rear Body Components (Four-Passenger) ................................................................................................ 4-15
Canopy – Two-Passenger ............................................................................................................................ 4-16
Two-Passenger Canopy Removal ............................................................................................................. 4-16
Two-Passenger Canopy Installation .......................................................................................................... 4-18
Canopy – Four-Passenger ........................................................................................................................... 4-18
Four-Passenger Canopy Removal ............................................................................................................ 4-18
Four-Passenger Canopy Installation ......................................................................................................... 4-19
Canopy (Monsoon Version) – Four-Passenger............................................................................................... 4-21
Monsoon Canopy Removal ...................................................................................................................... 4-21
Monsoon Canopy Installation.................................................................................................................... 4-21
2009-2011 Electric Precedent Maintenance and Service Manual Page iii
SECTION 5 – ACCELERATOR AND BRAKE PEDAL GROUP ............................................................................ 5-1
Pedal Group – Throttle Position Sensor........................................................................................................... 5-1
Pedal Group Removal ................................................................................................................................ 5-1
Throttle Position Sensor (TPS) ................................................................................................................... 5-3
Pedal Group Installation ............................................................................................................................. 5-3
Pedal Group – MCOR .................................................................................................................................... 5-3
Pedal Group Removal ................................................................................................................................ 5-3
Pedal Group Installation ............................................................................................................................. 5-4
MCOR ...................................................................................................................................................... 5-4
Debris Shields ............................................................................................................................................... 5-5
Accelerator Pedal Removal ............................................................................................................................ 5-6
Accelerator Pedal Installation ......................................................................................................................... 5-6
Brake Pedal Removal .................................................................................................................................... 5-6
Brake Pedal Installation ................................................................................................................................. 5-6
SECTION 6 – WHEEL BRAKE ASSEMBLIES .................................................................................................... 6-1
General Information ....................................................................................................................................... 6-1
Brake Shoe Removal ..................................................................................................................................... 6-1
Brake Assembly Cleaning .............................................................................................................................. 6-5
Brake Shoe Installation .................................................................................................................................. 6-7
Brake Cable Equalizer Adjustment ................................................................................................................ 6-10
Brake Cluster Removal and Installation .......................................................................................................... 6-11
Brake Cluster Removal ............................................................................................................................. 6-11
Brake Cluster Installation .......................................................................................................................... 6-11
Brake Cable Removal and Installation ........................................................................................................... 6-13
Brake Cable Removal .............................................................................................................................. 6-13
Brake Cable Installation ........................................................................................................................... 6-14
SECTION 7 – STEERING AND FRONT SUSPENSION ....................................................................................... 7-1
General Information ....................................................................................................................................... 7-1
Steering Wheel .............................................................................................................................................. 7-1
Steering Wheel Removal ............................................................................................................................ 7-1
Steering Wheel Installation ......................................................................................................................... 7-2
Steering Column............................................................................................................................................ 7-2
Steering Column Removal .......................................................................................................................... 7-2
Steering Column Installation ....................................................................................................................... 7-3
Rack and Pinion ............................................................................................................................................ 7-4
Rack and Pinion Inspection ........................................................................................................................ 7-4
Rack and Pinion Removal .......................................................................................................................... 7-5
Rack and Pinion Disassembly .................................................................................................................... 7-5
Rack and Pinion Assembly ......................................................................................................................... 7-8
Rack and Pinion Installation ....................................................................................................................... 7-9
Front Suspension ......................................................................................................................................... 7-11
Lubrication ............................................................................................................................................... 7-11
Wheel Alignment ...................................................................................................................................... 7-11
Front Suspension Components..................................................................................................................... 7-13
Tie Rod End Removal .............................................................................................................................. 7-13
Tie Rod Installation .................................................................................................................................. 7-13
Leaf Spring Removal ............................................................................................................................... 7-14
Leaf Spring Installation............................................................................................................................. 7-14
Kingpin and Steering Spindle Removal ..................................................................................................... 7-14
Kingpin and Steering Spindle Installation................................................................................................... 7-14
Control Arm Removal ............................................................................................................................... 7-15
Control Arm Installation ............................................................................................................................ 7-15
Shock Absorber Removal ......................................................................................................................... 7-15
Shock Absorber Installation ...................................................................................................................... 7-15
Front Wheel Bearings and Hubs ................................................................................................................... 7-18
Front Wheel Free Play Inspection ............................................................................................................. 7-18
Front Hub Removal .................................................................................................................................. 7-18
Hub Installation........................................................................................................................................ 7-18
Page iv 2009-2011 Electric Precedent Maintenance and Service Manual
SECTION 8 – WHEELS AND TIRES .................................................................................................................. 8-1
General Information ....................................................................................................................................... 8-1
Wheels ......................................................................................................................................................... 8-1
Wheel Removal ......................................................................................................................................... 8-1
Wheel Installation ...................................................................................................................................... 8-1
Tires ............................................................................................................................................................. 8-2
Tire Removal ............................................................................................................................................. 8-2
Tire Repair ................................................................................................................................................ 8-2
Tire Installation .......................................................................................................................................... 8-3
SECTION 9 – REAR SUSPENSION ................................................................................................................... 9-1
General Information ....................................................................................................................................... 9-1
Shock Absorbers ........................................................................................................................................... 9-1
Shock Absorber Removal and Inspection .................................................................................................... 9-1
Shock Absorber Installation ........................................................................................................................ 9-1
Leaf Springs (Two-Passenger Vehicles) .......................................................................................................... 9-2
Leaf Spring Removal (Two-Passenger Vehicles) .......................................................................................... 9-2
Leaf Spring Installation (Two-Passenger Vehicles) ....................................................................................... 9-3
Leaf Springs (Four-Passenger Vehicles) ......................................................................................................... 9-4
Leaf Spring Removal (Four-Passenger Vehicles) ......................................................................................... 9-4
Leaf Spring Installation (Four-Passenger Vehicles) ...................................................................................... 9-5
SECTION 10 – PERIODIC MAINTENANCE ...................................................................................................... 10-1
General Warning ......................................................................................................................................... 10-1
General Information ..................................................................................................................................... 10-3
Periodic Service Schedule............................................................................................................................ 10-3
Periodic Lubrication Schedule ...................................................................................................................... 10-6
SECTION 11 – IQ SYSTEM TROUBLESHOOTING – TPS.................................................................................. 11-1
General Information ...................................................................................................................................... 11-1
Wiring Diagrams ........................................................................................................................................... 11-2
Troubleshooting ............................................................................................................................................ 11-7
Troubleshooting the Vehicle with the IQDM ................................................................................................ 11-7
Troubleshooting Guide 1 ........................................................................................................................... 11-8
Troubleshooting Guide 2 ......................................................................................................................... 11-11
Test Procedures ......................................................................................................................................... 11-13
Battery Warning Light.................................................................................................................................. 11-35
Communication Display Module (CDM) ........................................................................................................ 11-35
Using the CDM to Retrieve Data from the Onboard Computer ................................................................... 11-36
CDM Troubleshooting Guide ....................................................................................................................... 11-38
SECTION 12 – IQ SYSTEM TROUBLESHOOTING – MCOR ............................................................................. 12-1
General Information ..................................................................................................................................... 12-1
Wiring Diagrams .......................................................................................................................................... 12-2
Troubleshooting ........................................................................................................................................... 12-7
Troubleshooting the Vehicle with the IQDM ............................................................................................... 12-7
Troubleshooting Guide 1 .......................................................................................................................... 12-8
Troubleshooting Guide 2 ......................................................................................................................... 12-11
Test Procedures ......................................................................................................................................... 12-13
Battery Warning Light.................................................................................................................................. 12-38
Communication Display Module (CDM) ........................................................................................................ 12-39
Using the CDM to Retrieve Data from the Onboard Computer ................................................................... 12-40
CDM Troubleshooting Guide ....................................................................................................................... 12-40
SECTION 13 – EXCEL SYSTEM TROUBLESHOOTING – TPS ......................................................................... 13-1
General Information ..................................................................................................................................... 13-1
Differences Between the Excel and IQ Systems......................................................................................... 13-1
Features ................................................................................................................................................. 13-2
2009-2011 Electric Precedent Maintenance and Service Manual Page v
Wiring Diagrams .......................................................................................................................................... 13-3
Troubleshooting ........................................................................................................................................... 13-8
Troubleshooting the Vehicle with the IQDM ............................................................................................... 13-8
Troubleshooting Guide 1 .......................................................................................................................... 13-8
Troubleshooting Guide 2 ......................................................................................................................... 13-11
Test Procedures ......................................................................................................................................... 13-13
Battery Warning Light.................................................................................................................................. 13-35
Communication Display Module (CDM) ........................................................................................................ 13-35
Using the CDM to Retrieve Data from the Onboard Computer ................................................................... 13-36
CDM Troubleshooting Guide ....................................................................................................................... 13-38
SECTION 14 – EXCEL SYSTEM TROUBLESHOOTING – MCOR ..................................................................... 14-1
General Information ..................................................................................................................................... 14-1
Differences Between the Excel and IQ Systems......................................................................................... 14-1
Features ................................................................................................................................................. 14-2
Wiring Diagrams .......................................................................................................................................... 14-3
Troubleshooting ........................................................................................................................................... 14-8
Troubleshooting the Vehicle with the IQDM ............................................................................................... 14-8
Troubleshooting Guide 1 .......................................................................................................................... 14-8
Troubleshooting Guide 2 ......................................................................................................................... 14-11
Test Procedures ......................................................................................................................................... 14-13
Battery Warning Light.................................................................................................................................. 14-38
Communication Display Module (CDM) ........................................................................................................ 14-38
Using the CDM to Retrieve Data from the Onboard Computer ................................................................... 14-39
CDM Troubleshooting Guide ....................................................................................................................... 14-40
SECTION 15 – IQ DISPLAY MODULE (IQDM) AND IQDM-P DIAGNOSTICS: IQ SYSTEM ................................ 15-1
Plugging the Handset into the Vehicle ........................................................................................................... 15-1
Introductory Display ..................................................................................................................................... 15-1
Menu Navigation ......................................................................................................................................... 15-2
Program (IQDM-P only) ........................................................................................................................... 15-3
Monitor ................................................................................................................................................... 15-3
Faults ..................................................................................................................................................... 15-4
Functions ................................................................................................................................................ 15-4
Information .............................................................................................................................................. 15-4
Programmer Setup .................................................................................................................................. 15-4
Monitor Menu .............................................................................................................................................. 15-4
Throttle ................................................................................................................................................... 15-4
Batt Voltage............................................................................................................................................. 15-5
Heatsink.................................................................................................................................................. 15-5
Arm Current ............................................................................................................................................ 15-5
Field Current ........................................................................................................................................... 15-5
Arm PWM ............................................................................................................................................... 15-5
Field PWM .............................................................................................................................................. 15-5
Speed Pulses .......................................................................................................................................... 15-5
Foot Input ............................................................................................................................................... 15-5
Forward Input .......................................................................................................................................... 15-6
Reverse Input .......................................................................................................................................... 15-6
Main Cont ............................................................................................................................................... 15-6
Key Input ................................................................................................................................................ 15-6
Password Tries (IQDM-P only) ................................................................................................................. 15-6
10.3 Transaxle......................................................................................................................................... 15-6
20+ Speed .............................................................................................................................................. 15-6
Faults Menu ................................................................................................................................................ 15-7
System Faults ......................................................................................................................................... 15-7
HW Failsafe ............................................................................................................................................ 15-9
KEY SWITCH SRO (Static Return to Off) .................................................................................................. 15-9
Throttle Fault 1 ....................................................................................................................................... 15-10
Speed sensor ......................................................................................................................................... 15-10
Main Welded .......................................................................................................................................... 15-10
Main Driver On ....................................................................................................................................... 15-10
Main Driver Off ....................................................................................................................................... 15-10
Page vi 2009-2011 Electric Precedent Maintenance and Service Manual
High Speed Walkaway ............................................................................................................................ 15-10
Main Coil FAULT..................................................................................................................................... 15-10
Field Missing .......................................................................................................................................... 15-11
HPD ...................................................................................................................................................... 15-11
Proc/Wiring ............................................................................................................................................ 15-11
Overvoltage............................................................................................................................................ 15-11
Low Battery Voltage ................................................................................................................................ 15-11
Thermal Cutback .................................................................................................................................... 15-11
Motor Stall.............................................................................................................................................. 15-11
Main Dropout ......................................................................................................................................... 15-11
Open Armature ....................................................................................................................................... 15-12
Incorrect Password (IQDM-P only) ........................................................................................................... 15-12
Max Password Tries (IQDM-P only) ......................................................................................................... 15-12
Fault History ........................................................................................................................................... 15-12
Clearing Fault History ............................................................................................................................. 15-12
Functions Menu .......................................................................................................................................... 15-13
Get Settings From Controller ................................................................................................................... 15-13
Write Settings to Controller ...................................................................................................................... 15-14
Reset All Settings ................................................................................................................................... 15-15
Information ................................................................................................................................................. 15-16
Model Number ........................................................................................................................................ 15-16
Serial Number ........................................................................................................................................ 15-16
MFG Date .............................................................................................................................................. 15-16
Software Version .................................................................................................................................... 15-16
Programmer Setup ..................................................................................................................................... 15-17
Program................................................................................................................................................. 15-17
Faults .................................................................................................................................................... 15-17
Information ............................................................................................................................................. 15-17
IQDM and IQDM-P Handset Troubleshooting ............................................................................................... 15-18
Test Procedures ......................................................................................................................................... 15-19
SECTION 16 – IQ DISPLAY MODULE (IQDM) AND IQDM-P DIAGNOSTICS: EXCEL SYSTEM ......................... 16-1
Plugging the Handset into the Vehicle ........................................................................................................... 16-1
Introductory Display ..................................................................................................................................... 16-2
Menu Navigation ......................................................................................................................................... 16-3
Program (IQDM-P only) ........................................................................................................................... 16-3
Monitor ................................................................................................................................................... 16-3
Faults ..................................................................................................................................................... 16-3
Functions ................................................................................................................................................ 16-3
Information .............................................................................................................................................. 16-4
Programmer Setup .................................................................................................................................. 16-4
Monitor Menu .............................................................................................................................................. 16-4
Speed ..................................................................................................................................................... 16-4
Throttle ................................................................................................................................................... 16-4
Batt Aux Voltage ...................................................................................................................................... 16-5
Temperature (same as Heatsink in IQ System) .......................................................................................... 16-5
Arm Current ............................................................................................................................................ 16-5
Field Current ........................................................................................................................................... 16-5
Armature PWM........................................................................................................................................ 16-5
Field PWM .............................................................................................................................................. 16-5
Brake Volts In .......................................................................................................................................... 16-5
Speed Pulses .......................................................................................................................................... 16-5
Foot Input ............................................................................................................................................... 16-6
Key Input ................................................................................................................................................ 16-6
Forward Input .......................................................................................................................................... 16-6
Reverse Input .......................................................................................................................................... 16-6
Charger Inhibit ......................................................................................................................................... 16-6
Main Cont Driver ..................................................................................................................................... 16-6
Password Tries (IQDM-P Only) ................................................................................................................. 16-6
Odometer ................................................................................................................................................ 16-7
Vehicle Speeds (IQDM-P Only)................................................................................................................. 16-7
Pedal Counters........................................................................................................................................ 16-7
Fault Counters......................................................................................................................................... 16-7
2009-2011 Electric Precedent Maintenance and Service Manual Page vii
Fault Count Odometers ............................................................................................................................ 16-7
Neg IA 250 .............................................................................................................................................. 16-7
Neg IA 300 .............................................................................................................................................. 16-7
Faults Menu ................................................................................................................................................ 16-8
System Faults ......................................................................................................................................... 16-8
HW Failsafe ........................................................................................................................................... 16-10
Throttle Fault .......................................................................................................................................... 16-10
Speed sensor ......................................................................................................................................... 16-11
Main Welded .......................................................................................................................................... 16-11
Main Driver On ....................................................................................................................................... 16-11
Main Driver Off ....................................................................................................................................... 16-11
Main Coil Open....................................................................................................................................... 16-11
FLD (Field) Missing................................................................................................................................. 16-12
HPD ...................................................................................................................................................... 16-12
Overvoltage............................................................................................................................................ 16-12
Low Battery Voltage (Undervoltage) ......................................................................................................... 16-12
Thermal Cutback .................................................................................................................................... 16-12
Motor Stall.............................................................................................................................................. 16-13
Main Dropout (1 or 2) .............................................................................................................................. 16-13
Current Sense Fault ................................................................................................................................ 16-13
Incorrect Password (IQDM-P only) ........................................................................................................... 16-13
Max Password Tries (IQDM-P only) ......................................................................................................... 16-13
Fault History ........................................................................................................................................... 16-13
Clearing Fault History ............................................................................................................................. 16-14
Functions Menu .......................................................................................................................................... 16-14
Get Settings From Controller ................................................................................................................... 16-14
Write Settings to Controller ...................................................................................................................... 16-15
Reset All Settings ................................................................................................................................... 16-16
Information ................................................................................................................................................. 16-17
Model Number ........................................................................................................................................ 16-17
Serial Number ........................................................................................................................................ 16-17
MFG Date .............................................................................................................................................. 16-17
Software Version .................................................................................................................................... 16-17
Programmer Setup ..................................................................................................................................... 16-18
Program................................................................................................................................................. 16-18
Faults .................................................................................................................................................... 16-18
Information ............................................................................................................................................. 16-18
IQDM and IQDM-P Handset Troubleshooting ............................................................................................... 16-19
Test Procedures ......................................................................................................................................... 16-20
SECTION 17 – ELECTRICAL COMPONENTS .................................................................................................. 17-1
Key Switch .................................................................................................................................................. 17-1
Testing the Key Switch ............................................................................................................................. 17-1
Key Switch Removal ................................................................................................................................ 17-1
Key Switch Installation ............................................................................................................................. 17-1
Battery Warning Light................................................................................................................................... 17-2
Testing the Battery Warning Light.............................................................................................................. 17-2
Battery Warning Light Removal ................................................................................................................ 17-2
Battery Warning Light Installation .............................................................................................................. 17-3
Forward/Reverse Rocker Switch ................................................................................................................... 17-3
Testing the Forward/Reverse Rocker Switch.............................................................................................. 17-3
Forward/Reverse Rocker Switch Removal ................................................................................................. 17-3
Forward/Reverse Rocker Switch Installation .............................................................................................. 17-4
Electronics Module Cover............................................................................................................................. 17-5
Electronics Module Cover Removal .......................................................................................................... 17-5
Electronics Module Cover Installation........................................................................................................ 17-5
Tow/Run Switch ........................................................................................................................................... 17-6
Testing the Tow/Run Switch ...................................................................................................................... 17-6
Tow/Run Switch Removal ......................................................................................................................... 17-6
Tow/Run Switch Installation ...................................................................................................................... 17-6
Throttle Position Sensor (TPS) ..................................................................................................................... 17-7
Testing the Throttle Position Sensor .......................................................................................................... 17-7
Throttle Position Sensor Replacement ...................................................................................................... 17-7
Page viii 2009-2011 Electric Precedent Maintenance and Service Manual
You're Reading a Preview
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$41.99
Viewed 12 Times Today
Secure transaction
What's Included?
Lifetime Access
Fast Download Speeds
Online & Offline Access
Access PDF Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$41.99
This service manual for the Club Car 2009-2011 Electric Precedent provides essential information for vehicle maintenance and repair. It covers a wide range of topics including safety guidelines, vehicle specifications, general information, body and trim, accelerator and brake pedal group, wheel brake assemblies, steering and front suspension, wheels and tires, rear suspension, periodic maintenance, troubleshooting of IQ and Excel systems, electrical components, batteries, battery charger, motor, transaxle, and IQ display module programmer. The manual is in English, consists of 404 pages, and is available in both Windows and Mac formats.
