2007 Renault Trafic II Service & Repair Manual
What's Included?
Lifetime Access
Fast Download Speeds
Offline Viewing
Access Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
DRIVESHAFTS
Exploded view
29
129
DRIVESHAFTS
Exploded view
PK GEARBOX DRIVESHAFT
29-1
DRIVESHAFTS
Front driveshaft
29
29-2
Front driveshaft
REMOVAL - WHEEL SIDE
Put the vehicle on a two-post lift.
Remove:
– the wheel hubcap,
– the hub nut,
– the front wheels,
– the track rod end nut (B),
– the shock absorber lower mounting bolts (C).
Push the driveshaft back into the stub-axle carrier,
whilst tilting the stub-axle carrier.
SPECIAL TOOLING REQUIRED
T. Av. 476 Ball joint extractor
TIGHTENING TORQUES (in daNm)
Shock absorber lower bolt 18
Track rod end nut 3.7
Hub nut 28
Wheel bolt 14.2
Mounting bolt on gearbox 4.4
Mounting bolt on intermediate bracket 4.4
Stud on gearbox 0.8
DRIVESHAFTS
Front driveshaft
29
29-3
REMOVAL - GEARBOX SIDE
Right-hand side
Remove:
– the two mounting bolts (A) of the intermediate
support,
– the driveshaft on the gearbox side.
Left-hand side
Drain the gearbox.
Remove:
– the three gaiter mounting bolts on the gearbox,
– the driveshaft on the gearbox side.
DRIVESHAFTS
Front driveshaft
29
29-4
REFITTING
Left-hand side
Remove the plastic protector from the bearing gaiter
and insert the driveshaft as horizontally as possible.
The driveshaft should enter freely until the thread
protrudes allowing the stub axle nut to be fitted.
Right-hand side
Clean the bore of the bearing into which the bearing is
inserted.
Check the condition of the contact surface of the lip
seal on the relay shaft.
NOTE: the differential output lip seal must always be
replaced.
With the protector in place, coat the splines of the seal,
gearbox end, with MOLYKOTE BR 2 grease.
Position the driveshaft and insert it.
The driveshaft should enter freely until the thread
protrudes allowing the stub axle nut to be fitted.
Proceed in the reverse order to removal.
REAR AXLE
Bearing
33
33-7
Bearing
REMOVAL
Remove:
– the brake disc (refer to the relevant procedure),
– the brake disc circlip.
– the bearing using tools A and C.
NOTE:
It is essential to fit a new bearing.
REFITTING
Refit:
– the bearing using tools B and C,
– the brake disc circlip,
– the brake disc (refer to the relevant procedure).
SPECIAL TOOLING REQUIRED
T. Ar. 1623 Tool kit for replacing the rear
bearings
You're Reading a Preview
What's Included?
Lifetime Access
Fast Download Speeds
Offline Viewing
Access Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$37.99
Viewed 96 Times Today
Secure transaction
What's Included?
Lifetime Access
Fast Download Speeds
Offline Viewing
Access Contents & Bookmarks
Full Search Facility
Print one or all pages of your manual
$37.99
Introducing the 2007 Renault Trafic II Service & Repair Manual!
This comprehensive guide is designed to assist you in maintaining and repairing your 2007 Renault Trafic II with ease. Whether you are a professional mechanic or a dedicated DIY enthusiast, this manual is your essential resource for all your service and repair needs.
Features of the 2007 Renault Trafic II Service & Repair Manual include:
- Step-by-step instructions for a wide range of repair and service procedures
- Detailed diagrams, illustrations, and photographs to simplify the repair process
- Covers all major systems and components of the 2007 Renault Trafic II
- Troubleshooting guides to help quickly identify and resolve common issues
- Maintenance schedules and procedures to ensure optimal vehicle performance
No matter the challenge you face with your 2007 Renault Trafic II, this manual has you covered. It is the ultimate tool to help keep your vehicle in top condition and extend its service life.
Compatible Models:
- Renault Trafic II (2007)
Take control of your vehicle’s maintenance—get your copy of the 2007 Renault Trafic II Service & Repair Manual today!
