Answer
Aug 09, 2025 - 05:34 PM
On the 92A Cayenne, the rear camera is mounted in the tailgate handle trim, so replacing it is fairly straightforward if you’re comfortable with basic trim removal. Here’s the general process:
- Disconnect the battery – You’ll be unplugging electronics, so cut the power first.
- Open the tailgate and remove the inner trim panel — usually held in with screws and plastic clips. A trim tool helps avoid damage.
- Access the tailgate handle area — the camera is built into or next to this assembly.
- Unplug the camera connector from the wiring harness.
- Remove the mounting screws or clips holding the camera in place.
- Swap in the new camera, secure it, and reconnect the wiring.
- Reinstall the trim panel and reconnect the battery.
The service manual will give you the exact fastener types, torque specs, and wiring diagrams so you know exactly where everything is and how it comes apart without breaking clips.
Good luck!
