Answer
Aug 02, 2025 - 03:48 AM
To replace the driver’s side mirror on a 1995 Lexus ES 300, here’s a simple step-by-step guide:
-
Remove interior trim panel — Inside the door near the mirror, there’s a small triangular trim piece (sail panel). Gently pry it off using a plastic trim tool or flathead screwdriver.
-
Disconnect wiring — If the mirror is powered, disconnect the electrical connector behind the trim.
-
Unbolt the mirror — Use a 10mm socket to remove the three mounting nuts holding the mirror to the door. Be sure to support the mirror with your hand while doing this to prevent it from falling.
-
Remove the old mirror — Once the nuts are off, pull the mirror away from the door.
-
Install the new mirror — Position the new mirror on the door, hand-tighten the nuts, and then torque them down snugly (don’t overtighten to avoid cracking the mirror housing).
-
Reconnect wiring — Plug in the electrical connector if it's a power mirror.
-
Reinstall trim panel — Snap the interior trim piece back into place.
That’s it! No special tools required beyond basic hand tools.
That said, if you want the more complete procedure, complete with schematics and torque specs, you can always grab this 👉🏻 1995 Lexus ES 300 (XV10) OEM Service & Repair Manual. It has all the schematics and torque specs you need to do the job up to the manufacturer's standard.
