Answer
Jul 15, 2024 - 08:38 PM
The recommended service schedule for a 2016 Toyota 4Runner is designed to ensure the vehicle remains in optimal operating condition. Here's a breakdown of the key maintenance intervals:
-
Every 5,000 miles or 6 months:
- Inspect and adjust all fluid levels.
- Inspect wiper blades.
- Rotate tires.
- Inspect brake linings/drums and brake pads/discs.
-
Every 10,000 miles or 12 months:
- Replace cabin air filter.
- Replace engine oil and oil filter.
-
Every 15,000 miles or 18 months:
- Inspect ball joints and dust covers.
- Inspect brake lines and hoses.
- Inspect drive shaft boots.
- Inspect engine coolant.
- Inspect exhaust pipes and mountings.
- Inspect radiator and condenser.
- Inspect steering gear.
- Inspect steering linkage and boots.
- Inspect rear differential oil/transfer case oil (for 4WD models).
-
Every 20,000 miles or 24 months:
- Replace engine air filter.
- Inspect transmission.
- Inspect fuel lines.
-
Every 100,000 miles or 120 months:
- Flush and replace engine coolant.
- Check brake pads and rotors for wear.
- Check and top-off fluid levels as needed.
These guidelines are intended to keep your 4Runner running smoothly and reliably. However, always refer to the owner’s manual for the most precise maintenance requirements, and consider how varying driving conditions might impact the need for more frequent service. Regular maintenance is not only crucial for vehicle performance but also for safety and longevity.
