Answer
Jul 12, 2024 - 08:31 PM
To identify your Evinrude engine, you'll need to locate the model number and serial number. Here are the steps to find these numbers:
-
Nameplate on the Motor:
- Location: The model and serial numbers are usually found on a nameplate attached to the motor itself. This plate is often located on the transom bracket, which is the part of the motor that attaches to the boat.
-
Mounting Bracket:
- Location: Another common location is on the mounting bracket of the motor. Look for a metal or plastic plate with the model and serial numbers.
-
Core Plug:
- Location: On some models, the model number can also be found on a silver core plug located on the top of the engine block.
Decoding the Model Number:
-
Post-1980 Models: Evinrude outboards from 1980 onwards use a code to indicate the year. The code is based on the word "INTRODUCES":
- I = 1
- N = 2
- T = 3
- R = 4
- O = 5
- D = 6
- U = 7
- C = 8
- E = 9
- S = 0
For example, if the model number includes "CE," it corresponds to the year 1989 (C = 8, E = 9).
-
Pre-1980 Models: The model numbers for these older motors do not follow a consistent code. You may need to refer to a specific guide or database for these years.
Example Locations:
- Transom Bracket: Typically on the left side when facing the motor from the rear.
- Engine Block: Look for a small, round plug with the model number stamped on it.
