Answer
Jun 17, 2024 - 06:19 PM
To reset the Dodge Caravan computer, you can disconnect the battery or use the dashboard controls. Both methods are effective in resetting the PCM (Powertrain Control Module).
Disconnecting the Battery:
- Open the Hood: Securely open the hood of your vehicle.
- Locate the Battery: Find the battery, typically on the driver’s side above the front wheel.
- Loosen the Negative Cable: Using an adjustable wrench, loosen the bolt on the negative battery cable (do not remove it completely).
- Detach the Negative Cable: Carefully detach the negative battery cable from the terminal post.
- Wait for 10 Minutes: Allow approximately 10 minutes for the computer to reset.
- Reattach the Negative Cable: Firmly reattach the negative cable to the terminal post and tighten the bolt.
- Close the Hood: Securely close the hood. Your Dodge Caravan PCM should now be reset.
Using the Dashboard Controls:
- Switch the Ignition On: Turn the ignition to the 'on' position without starting the engine.
- Press the Menu Reset Button: Press the menu reset button until the service interval is displayed on the dashboard.
- Set the Next Service Mileage: Repeatedly press the Step button to set the mileage for the next service interval.
- Change the Display: Press the C/T button until the display changes.
- Confirm the Reset: Tap the Step button until ‘yes’ appears on the display, confirming the reset.
By following these steps, you can effectively reset your Dodge Caravan computer, helping to resolve minor issues and clear error codes.
