top line
top bt line
top bt line
top bt line
top bt line
Peugeot Diagnostic And Programming Interface

Peugeot Diagnostic And Programming Interface


[3 Reviews] Write Review


Product Reviews

Peugeot Diagnostic And Programming Interface

This is the ultimate Peugeot Diagnostic System, as used by dealers in Europe, USA and around the world. Includes all hardware and software all pre-built in VMWare (Virtual Environment).

This kit is very similar to what the Peugeot dealers use, if not better, which costs in the region of £3000 GBP. Why allow them to charge you silly money when you can do all the above and more yourself at a fraction of the cost?

This Diagnostic Tool is the perfect interface into your vehicles car. Whether your are a DIY mechanic, or a professional garage, there is not doubt you will save both time and money after a couple of uses. It will eventually pay for itself, that we can guarantee.

We pride ourselves on support. We will go out of our way to make sure you are happy. We've been in the diagnostic trade for many years and most of our customers are returning customers. We pride ourselves in top quality service.

If you have any difficulties we can resolve any issues remotely. See here for more information. We can also arrange for one of our agents to to come and set this up at your premises for a cost of £250 (within UK) and £500 (outside UK) + travel (plane, train, car, petrol, accomodation) costs.

  • Windows inc XP, Vista, 7 and 8 both 32 and 64 bit versions
  • Mac OSX 10.6 and Above
  • Main Interface Unit with OBD2 Cable
  • Long 9-PIN to USB Cable
  • Short 9-PIN to USB Cable
  • OBD2 Cable
  • 16-PIN to Clip Cable
  • 30-PIN Adapter (Required for Older Vehicles)
  • Downloadable Peugeot DiagBox Software
  • Instruction Sheet

  • ION
  • 107
  • 206
  • 207
  • 207+
  • 208
  • 301
  • 307
  • 308
  • RCZ
  • 407
  • 408
  • 508
  • 607
  • 807
  • 1007
  • 3008
  • 4007
  • 4008
  • 5008
  • Bipper
  • Partner
  • Expert
  • Boxer
  • 106
  • 205
  • 306
  • 309
  • 405
  • 406
  • 605
  • 806

With this diagnostic interface, you will now be able to connect to the various ECU's on your vehicle and adjust as and where necessary (ensure to backup any existing settings). Is capable of reading the following:

  • Read Identification - Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
  • Read Fault Codes - Displays all stored and pending fault codes with complete description. Program supports report printing and copy to clipboard.
  • Clear Fault Codes - This function clears all stored fault codes and other diagnostic information.
  • Auto-Scan - Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
  • Measured Values - Software displays live data such as:
  • Engine Speed
  • Battery voltage
  • Oxygen Sensor
  • Coolant Temperature
  • Plus More...

Values can be displayed in graph format, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows for offline analysis. This is excellent to help track issues, which initially go unnoticed.

  • Actuator Test - This activates particular actuator system. For e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc...
  • Programming Functions / Adaptation - This feature is of great importance in all vehicles because systems like engine control units, immobilizers, airbags, alarms, body control units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing faulty control units.
In-Depth Functions:
  • Activation of ABS pump for bleeding after replacement
  • Coding/Programming (including key memory and car memory)
  • Complete Diagnostics (including test plans)
  • Live data checks
  • Testing of individual parts before replacement
  • Transmission bleeding
  • Plus more...
This software works out of the box. Once you are familiar with it, its a dream to use and can eventually play around with so many features, which you thought were not available on your vehicle.

PLEASE NOTE: Our diagnostic tool is not a generic type code reader. It has been specifically manufactured to our specification to work with Peugeot vehicles. Our diagnostics cables are internally modified by us to give true ignition detection. This helps the risk of blowing fuses.
Displaying 1 to 3 (of 3 reviews)
by Adrian Gray
Date Added: Tuesday 01 March, 2016TEXT_OF_5_STARS
There was a technical issue installing the software, but the online support was superb in what...  Read more
by Jim Staub
Date Added: Wednesday 17 December, 2014TEXT_OF_5_STARS
If you like to do your own maintenance, this service manual is an indispensable reference. There...  Read more
by Rune Bjorndal
Date Added: Thursday 19 June, 2014TEXT_OF_5_STARS
Great service i must say ! I was a bit doubtful buying a diagnostic tool for 508 at a shop that...  Read more
Displaying 1 to 3 (of 3 reviews)