BMW OBD2 Diagnostic Interface Cable
This cable will work with BMW cars using K-Line protocols built before March 2007
. Our cable uses the latest FTDI chipset with the FT232BL controller IC, which has a true ignition sense detection circuit built within the cable lead allowing auto detection of ignition on/off cycles necessary for some coding/programming functions
Our data cable eliminates the need to use a serial converter and is an all in one solution that requires no more hardware to use other than the cable and computer, no need for diagnostic heads of any kind. Our cables are fully tested before we send them out and come complete with all the necessary drivers for installations so you have peace of mind knowing all you need comes complete with the cable.
Our cable is not a generic type code reader it has been specificaly adapted by us to work with BMW vehicles and PCÕs incorporating a USB port so there is no need for serial port adapters for use on newer PCÕs. Our diagnostics cable are internally modified by us to give true ignition detection as per above.
- Compatible with Windows inc XP, Vista and 7, both 32 and 64 bit versions
- If you have a Mac, can build you a virtuali sed environment for £20 GBP
- Modified to use with EDIABS, INPA, NSC, EXPERT, DIS, PROGMA, SSS, NAVCODER
- Fault code reading / reset
- Service light reset
- Annual inspection reset
- Airbag light reset
- ABS wheel speed check
- Plus more...
- Activation of ABS pump for bleeding after replacement
- Coding/Programming (including key memory and car memory)
- Complete Diagnostics (including test plans)
- Live data checks
- EWS DMW synchronisation
- Testing of individual parts before replacement
- Transmission bleeding
- Plus more...
- 1 Series Ð E87
- 3 Series Ð E36, E46, E9X
- 5 Series Ð E34, E39, E60, E61
- 6 Series Ð E63, E64
- 7 Series Ð E32, E38, E65, E66
- 8 Series Ð E31
- X Series Ð E53, E70
- Z Series Ð E52, E85
- Mini - R50, R53, R53, R55, R56
E31, E32, E34, E36 models use around 20 pin Diagnostics socket found under the bonnet, We supply a
quality built modified 16 -20 pin adapter here.
You Will Receive:
- 1 x USB BMW diagnostics Cable
- BMWTools V1.07 (Including NCS Expert WinKFP Tools32 NFS)
- DIS v57 (Dealer Level)
- SSS Progman v32 (Coding/Programming)
- Latest FTDI USB Drivers
Compatible with Windows inc XP to 8, both 32 and 64 bit version. If you have a Mac, we can build you a virtualised environment for £29.99 GBP
. Ensure to select "Mac Version" under "Available Options" above.